FS:SSR MESH, 5 LUG Swap, Techtom

[johnny426]

Two black SSR MESH rims 15x7 offset +1 PCD 4x114.3 ($500.00 shipped.)

Complete 5-lug swap includes 2 front splindes, hubs, rotors, and 2 rear rotors, hubs from a S14 ($550.00 shipped.)

One used Techtom MDM-100 for S13 ($300.00 shipped.)

Paypal only.

Please email me at [email protected] for the pictures. I maybe post the pictures later.

Thanks,
Johnny

[driftRPS13]

if i had paypal, i'd buy the wheels. but i don't.

[Dousan_PG]

Originally posted by driftRPS13
if i had paypal, i'd buy the wheels. but i don't.

and because you are poor
dont clog up people's posts!


johnny, you can attach pictures w/o hosting them, here on zilvia. its a option when you post a ad/reply..etc. you wont need to host them, zilvia will do that for you.

good luck on your sale

[johnny426]

Here is the 5 lug swap components:

[johnny426]

Here is the picture of the rims

[johnny426]

Here is the picture of the 5 lug components

[johnny426]

techtom is used for 6 months, like-new condition and 100% working. Come with box and stickers.

[JasonNagra]

Where are you located johnny??

[johnny426]

I am located in Boise, Idaho where only has one or maybe two SR running. About 1000 miles from Socal.

[Rick-95ZE]

Originally posted by johnny426
Here is the picture of the 5 lug components


Hey, Im still interested, but won't I need the s14 brake calipers??? or will the ones off my s13 work?? I have a 91 hatch

[johnny426]

Good question, Can someone take this question if S13 stock front caliper fit S14 5-lug hub and rotor?

I know the rear caliper works fine.

Please help...

[sykikchimp]

yes, your stock calipers will work fine.

you will need to get an s14 ball joint for you front lower control arms.

[andrave]

my advice- get em from pdm racing. ball joints are like 45 bucks each, pdm has them with new control arms, for 50 each, and you get new control arm bushings.
you could even upgrade to poly control arm bushings, new control arms, and the s14 ball joints, all with one component....

[neuticle]

Email sent... i'm in salt lake.

[johnny426]

Everything is still on sale. One more pic for rims:

The rims are in good shape, no bents. Weight 11lb.

[Gzero]

I wil give you 400$ if so email me at [email protected]

[johnny426]

Anyone? New prices:

5-lug swap $500.00 shipped
SSR mesh $450.00 shipped
Techtom $280.00 shipped

Thanks,
Johnny

[SilviaDriver]

400 shipped and u got urself a possible buyer. i just bought a pair of SSR mesh for 350 and it had tires on it. sorry to low ball.

id pay with MO, or Cashiers Check. seen too many people get scammed via paypal.

[Driftin_240sx]

hey u still have that 5 lug swap for sale? 400 shipped :) ? well let me know im lookin to possably get them next week.

david

[johnny426]

Thank you all for your offers.

For the 5 -lug swap, I cannot do $400 shipped. Shipping itself is about $80.

SilviaDriver, $350.00 for a pair of SSR mesh with tires. It's a very good deal. What offset are they?

I bought mine (a pair) at Alta, socal, for $650 with crappy tires. I was told the lower the offset is, the more expansive they are. Mine with 3 inch lip fit on a S13 very well, but I need to roll the fenders for clearance. It looks flush and I think this is the maximum lips I can get for the rear without flares.

All sale are moving to ebay soon starting at a $1.00 with no reserve.

[drift into a curb]

Originally posted by johnny426

I bought mine (a pair) at Alta, socal, for $650 with crappy tires. I was told the lower the offset is, the more expansive they are.

Alta told me different. The width of the rim, anything higher than 7J gets more expensive. At any rate, alta prices have gone up.

[johnny426]

It makes sense. Wider rims=more metal=more expansive. Also they (above 7J) are harder to find.

For mesh style rims, lower offset=more lip=perhaps more expansive.

I like Alta because you can try the rims on. Are there any other shop similar to Alta in west coast?

[SilviaDriver]

wth is alta?

mine are SSR Formula Mesh 15x7 +23

[[email protected]]

Originally posted by johnny426
It makes sense. Wider rims=more metal=more expansive. Also they (above 7J) are harder to find.

For mesh style rims, lower offset=more lip=perhaps more expansive.

I like Alta because you can try the rims on. Are there any other shop similar to Alta in west coast?

yes there is.. .try wheelchoice. - wheelchoice.com a little expensive but better quality.

[johnny426]

Techtom SOLD


Anyone?


-----------------------------------------------------------------------------------
5-lug swap including 2 front splindes, hubs, rotors, and 2 rear spindes/upright, rotors, hubs from a S14 [$500.00 shipped]

For S13 owner, S14 balljoints are needed to press into S13 LCA. S14 balljoints are about $50.00 a pair at Autozone or local auto shops.

For S14 owner, these all you need.
-----------------------------------------------------------------------------------


3-inch lip SSR reverse mesh fit 4-lug S13 and S14, and AE86.
[$450.00 shipped]

[s0ldats]

where are you located? i'm interested in the wheels. could i get them cheaper if i picked up?

[johnny426]

I am in Boise, ID 83704.

SSR reverse mesh $400 Pickup
(Please keep in mind I am selling a pair, Not a set)

5-lug swap $420 Pickup

[johnny426]

They are on ebay now...

http://cgi6.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=johnny426

Is it OK to open a new thread, since this one is too long? Hopefully, doesn't confuse anyone

[Frappe]

If they don't sell on Ebay, would you be willing to sell just the hub-and-lugs part of the 5-lug swap?

If so, how much?
If not, that's fine and I won't be surprised at all. It's mighty different from your original sale.

[kidinthehall]

Originally posted by SilviaDriver
wth is alta?

mine are SSR Formula Mesh 15x7 +23

Alta is a chain of stores that sells used wheels.....like wheelchoice on a larger/better scale

[JamesC89]

Alta is a chain of stores that sells used wheels.....like wheelchoice on a larger/better scale

Do they have a website? Where are their locations?

[kidinthehall]

they dont have a website that im aware of, they are based out of japan. i think they have one US office

[Dante319]

I will give you $460 shipped for it right now if you still have it.
Thanx a lot

[adey]

jamesc89, alta is only located in SoCal, as far as I've heard. AFAIK, only Wheelchoice have a website and ship, alta (last I checked) did not.

what johnny said about price/offset is generally true with most rwd wheels -- lower offset = higher price. wider the wheel also typically = higher price, not because of material costs but because of availability. 15*6.5 is easy to find. 15*8 is harder! (Same goes for offset; -1mm offset is harder to find than +40mm offset on a 15*7 wheel.)

These days, I have to admit, $400/pair of good offset (read: less than +15mm) SSR Reverse mesh is somewhat reasonable. You'd be hard pressed to find them for any cheaper!

johnny, you have email. let me know if you (still) want the hub!

[dancemachine]

is the five lug conversion still for sale...and if so is it complete...? email me at [email protected]