PDA

View Full Version : Where do i get this bulb for my headlights?

SilS13Coupe
10-30-2009, 02:44 PM
Probably a noob question, but where can i find this bulb for my Silvia headlights?

It blew out and im looking to replace it.

Also for the corner lights, the tab broke so it doesnt stay on, is there any other way to fix the tab or would i have to basically buy a new corner light?

Thanks

http://i46.photobucket.com/albums/f114/wishing4cobra/DSC_4525.jpg
http://i46.photobucket.com/albums/f114/wishing4cobra/DSC_4523.jpg
g6civcx
10-30-2009, 02:50 PM
It's H3C and can be converted to H3 for easy replacement.

I made a tab out of sheet metal. Just measure, cut, drill 2 holes, and bolt in. Pretty easy.
SilS13Coupe
10-30-2009, 03:45 PM
It's H3C and can be converted to H3 for easy replacement.

I made a tab out of sheet metal. Just measure, cut, drill 2 holes, and bolt in. Pretty easy.

So I just buy the bulb and wire it up?

THe bulb is H3C?
Sileighty_85
10-30-2009, 05:11 PM
well you can either buy this
The Nismo Shop : West Covina Nissan : Nissan JDM H3C Type Bulb (http://www.thenismoshop.com/ikorb.php?func=catalog&category_id=1243&product_id=13080)

or like g6 said, make the tab, basically you need to make a ground for the the bulb assembly
g6civcx
10-30-2009, 05:12 PM
So I just buy the bulb and wire it up?

THe bulb is H3C?

Yes, and yes.
g6civcx
10-30-2009, 05:13 PM
like g6 said, make the tab, basically you need to make a ground for the the bulb assembly

The tab is for the broken corner lamp mounting tab.

The bulb needs a spade terminal connected to ground.
SilS13Coupe
10-30-2009, 09:48 PM
The tab is for the broken corner lamp mounting tab.

The bulb needs a spade terminal connected to ground.

I have the 2 wires that was pulled off when the bulb broke.

I compared the two sides and its the same, i guess i just have to get the new bulb and tie the wires on.