sicr62003
10-29-2009, 12:58 PM
I have a stand alone EMS that I pulled out of my sand car that I need to sell to help with my new project. It's made by Perfect power. It's the XMS4B-8A(Xtreme Management System). Here is some info on it and what it can do.
Asking $700 for it.
The XMS4 B Group consists of four different modules, of the mid-range of XMS4 products. They are ideally suited for 4 to 8 cylinder engines, as well as Turbo and Supercharged engines, and are available with:
4 to 8 x 2Amp Direct Injector Drivers (up to 3AMP)
4 to 8 x Ignition Signal Outputs
4 x Setpoint Outputs
Wide Band LSU-4 Controller
4 to 8 x 2Amp Direct Injector Drivers
4 to 8 x Ignition Signal Outputs
Sequential ignition and injection for 4 to 8 cylinders
4 x Setpoint Outputs
Built-in Wide Band Lambda circuit for the Bosch LSU4
On-board MAP (AMP) Sensor (on specific modules) (up to 3AMP)
USB 2.0 Communication
Wideband Lambda Control
High Speed USB 2.0 Communication, Real Time
Separate CRANK (CB1) and CAM (CB2) Inputs
Partial or Complete Closed Loop Lambda Operation
+5 Volt Output to power: Manifold Pressure, Temperature Sensors, TPS, etc.
Electronic Boost Control
Each Setpoint has a High/Low Limit
Each setpoint can be AND/OR to ONE other Setpoint
Automatically Switch Maps via Setpoint Condition
Two-Layer Fault and Condition Indication: Group and Items
Seamless Map Switching while you Drive
All Inputs can be Calibrated to suit the Factory Sensors
A Tuned Value will have an immediate effect (Live)
Important Software Features:
LetRipp Software - User Friendly from DIY to Professional Tuner
Has 2 Complete Maps of EVERYTHING
Large Tuning Maps 16 x 24
Instantly Saves tuning changes
Asking $700 for it.
The XMS4 B Group consists of four different modules, of the mid-range of XMS4 products. They are ideally suited for 4 to 8 cylinder engines, as well as Turbo and Supercharged engines, and are available with:
4 to 8 x 2Amp Direct Injector Drivers (up to 3AMP)
4 to 8 x Ignition Signal Outputs
4 x Setpoint Outputs
Wide Band LSU-4 Controller
4 to 8 x 2Amp Direct Injector Drivers
4 to 8 x Ignition Signal Outputs
Sequential ignition and injection for 4 to 8 cylinders
4 x Setpoint Outputs
Built-in Wide Band Lambda circuit for the Bosch LSU4
On-board MAP (AMP) Sensor (on specific modules) (up to 3AMP)
USB 2.0 Communication
Wideband Lambda Control
High Speed USB 2.0 Communication, Real Time
Separate CRANK (CB1) and CAM (CB2) Inputs
Partial or Complete Closed Loop Lambda Operation
+5 Volt Output to power: Manifold Pressure, Temperature Sensors, TPS, etc.
Electronic Boost Control
Each Setpoint has a High/Low Limit
Each setpoint can be AND/OR to ONE other Setpoint
Automatically Switch Maps via Setpoint Condition
Two-Layer Fault and Condition Indication: Group and Items
Seamless Map Switching while you Drive
All Inputs can be Calibrated to suit the Factory Sensors
A Tuned Value will have an immediate effect (Live)
Important Software Features:
LetRipp Software - User Friendly from DIY to Professional Tuner
Has 2 Complete Maps of EVERYTHING
Large Tuning Maps 16 x 24
Instantly Saves tuning changes