DrftKingIII
10-27-2009, 12:44 PM
Up for sale is my 1997 Nissan 240sx. Here are the specs/mods. PM me if you have any questions
Exterior:
Full Version Select V2 Kit
30mm Wide Rear fenders riveted on
Origin 30mm Front Fenders
LED Taillights
Sparco Hood Pins
Authentic JDM K's Aero Wing
Rustoleum Paint Job
Wheels:
4 5Zigen FNO1RC's 17x10 +12's
Motor/Drivetrain:
RB20, with about 65k on the motor
RB25 S1 Turbo
Screamer Pipe (Sounds awesome)
Full 3" turbo back exhaust, mostly straight pipes
Exedy Twin Plate Clutch
Short Throw Shifter
Welded Diff
Walboro 255 Fuel Pump
Flex a lite 220 fans with switch mounted on Center Console
FMIC w/ Aluminuim Piping
Manual Boost Controller
HKS Intake Filter
Suspension:
Stance GR+ coils
Whiteline Swaybars front and rear
Tein Tension rods
JIC Magic Rear upper control arms
Tein Inner/outer Tie Rods with spacers
Subframe Bushings
Other Stuffs:
Full 6pt cage, with door bars/ Harness Bar. Legal for the competitions I did (DDay and other Local events)
Sparco Evo Seat
Bride FG Seat Rail
Sparco 360MM Wheel
Sparco Short Hub
CNC Hydro e-brake (Works like a champ)
Z32 Front and rear brakes, with Z32 BMC. Front rotors are blanks, rears are drilled/slotted
Optima Red Top
Greddy Turbo Timer-Silver
SAFC NEO
Burberry Door Panels?
Sunroof Delete
Stitch Welded under the hood.
Things it needs:
Real paint, I have a local hookup on paint so it can be painted to your preference for extra.
New driverside headlight-I will provide before sale
Center Peice for LED tails-Never got the 3rd peice for some reason, Ill also provide that.
Front Bumper to be re-fiberglassed-Ride height+local roads killed it-This will be done prior to purchase.
Motor runs great and pulls hard. Outran a C5 Vette 6-speed and my Dinan E36 M3.
Car is located in St Louis, Missouri. Garage'd most of the time because Im away at school. Im sure Im forgetting a few things.
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1204473794400_1305270184_30881568_1680104_n.j pg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs237.snc1/8434_1204473314388_1305270184_30881566_7966830_n.j pg
This next picture really shows how low it is. This is next to a E36 M3 on stock ride height.
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1204470994330_1305270184_30881560_1968408_n.j pg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1207619553042_1305270184_30889843_5361453_n.j pg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1207619393038_1305270184_30889840_6846933_n.j pg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1207619513041_1305270184_30889842_7435629_n.j pg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs237.snc1/8434_1207619593043_1305270184_30889844_877065_n.jp g
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs179.snc1/6760_1158841773628_1305270184_30765275_6898923_n.j pg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs085.snc1/4900_1139475009471_1305270184_30701960_6913522_n.j pg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs082.snc1/5004_1142532565908_1305270184_30712728_2529262_n.j pg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs115.snc1/4960_1133124890722_1305270184_30683465_5383283_n.j pg
http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2180/75/115/1305270184/n1305270184_30563414_4174.jpg
http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2180/75/115/1305270184/n1305270184_30563402_338.jpg
Price is $11,500 with all the things I said I'd be replacing. Email me at [email protected] or PM me here if you have any questions.
Exterior:
Full Version Select V2 Kit
30mm Wide Rear fenders riveted on
Origin 30mm Front Fenders
LED Taillights
Sparco Hood Pins
Authentic JDM K's Aero Wing
Rustoleum Paint Job
Wheels:
4 5Zigen FNO1RC's 17x10 +12's
Motor/Drivetrain:
RB20, with about 65k on the motor
RB25 S1 Turbo
Screamer Pipe (Sounds awesome)
Full 3" turbo back exhaust, mostly straight pipes
Exedy Twin Plate Clutch
Short Throw Shifter
Welded Diff
Walboro 255 Fuel Pump
Flex a lite 220 fans with switch mounted on Center Console
FMIC w/ Aluminuim Piping
Manual Boost Controller
HKS Intake Filter
Suspension:
Stance GR+ coils
Whiteline Swaybars front and rear
Tein Tension rods
JIC Magic Rear upper control arms
Tein Inner/outer Tie Rods with spacers
Subframe Bushings
Other Stuffs:
Full 6pt cage, with door bars/ Harness Bar. Legal for the competitions I did (DDay and other Local events)
Sparco Evo Seat
Bride FG Seat Rail
Sparco 360MM Wheel
Sparco Short Hub
CNC Hydro e-brake (Works like a champ)
Z32 Front and rear brakes, with Z32 BMC. Front rotors are blanks, rears are drilled/slotted
Optima Red Top
Greddy Turbo Timer-Silver
SAFC NEO
Burberry Door Panels?
Sunroof Delete
Stitch Welded under the hood.
Things it needs:
Real paint, I have a local hookup on paint so it can be painted to your preference for extra.
New driverside headlight-I will provide before sale
Center Peice for LED tails-Never got the 3rd peice for some reason, Ill also provide that.
Front Bumper to be re-fiberglassed-Ride height+local roads killed it-This will be done prior to purchase.
Motor runs great and pulls hard. Outran a C5 Vette 6-speed and my Dinan E36 M3.
Car is located in St Louis, Missouri. Garage'd most of the time because Im away at school. Im sure Im forgetting a few things.
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1204473794400_1305270184_30881568_1680104_n.j pg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs237.snc1/8434_1204473314388_1305270184_30881566_7966830_n.j pg
This next picture really shows how low it is. This is next to a E36 M3 on stock ride height.
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1204470994330_1305270184_30881560_1968408_n.j pg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1207619553042_1305270184_30889843_5361453_n.j pg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1207619393038_1305270184_30889840_6846933_n.j pg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs217.snc1/8434_1207619513041_1305270184_30889842_7435629_n.j pg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs237.snc1/8434_1207619593043_1305270184_30889844_877065_n.jp g
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs179.snc1/6760_1158841773628_1305270184_30765275_6898923_n.j pg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs085.snc1/4900_1139475009471_1305270184_30701960_6913522_n.j pg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs082.snc1/5004_1142532565908_1305270184_30712728_2529262_n.j pg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs115.snc1/4960_1133124890722_1305270184_30683465_5383283_n.j pg
http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2180/75/115/1305270184/n1305270184_30563414_4174.jpg
http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2180/75/115/1305270184/n1305270184_30563402_338.jpg
Price is $11,500 with all the things I said I'd be replacing. Email me at [email protected] or PM me here if you have any questions.