Fs/ft 1993 widebody rx7 project car

[widebodyseven]

Its time for me to let go of my 1993 mazda rx7 after 3 1/2 years.

Located in long beach CA 90813
No Shipping:(

The car is a clean title but hasn't been registered since june of 2006 which was when i purchased it. Theres alot of reason why im selling it 1) I lost my job so i can't aford to finish the project 2) I need a working car so i could go back to school 3) This isn't a car that 18 year old needs right now.

My original plan for the car was to make it a track car. So i stripped everything under the interior meaning if you were to look under the interior there won't be any thing there but the chassis. Theres no AC or power steering and all the emmision related item were removed.

The motor runs and i bought the block rebuilt and was told it has under 1000 miles. This is a project car so everything is disconnected so i can't start it up to show the buyer but i do have a video to show the motor idling when everything was connected. The motor is curently setup for NA and if you want it to run all you need to do is connect all the plugs and ground and buy a ecu. Also it doesn't have any door panels but the rest of the interior is there.

All this car really needs is a turbo,ecu,injectors,piping,mid-pipe,tune and alot of labor to be ready.

CAR DOESN'T COME WITH RIMS YOU HAVE TO PROVIDE YOUR OWN SET

Modification List:
-Exterior
-Asuka Design Widebody Kit(Only car that has this kit)
-Asuka Design V-mount Hood
-Custom carbonfiber sideskirt lip
-Tein Springs
-Paint is Blaze Red(1 year old)
-Missing Headlight Covers

-Interior
-MOMO Bucket Seats(The driver side rail needs to be re-done)
-Carbonfiber Center Console Wrap
-Turbo Timer
-Apexi AVC Type-R
-Efini Steering Wheel
-Short Shifter
-Battery relocated to the Trunk
-Driver Seat has no Seat Belt

-Engine
-Rebuilt less than 1000 miles
-B&M Ignition Amplifier
-Emissions Removed with Banzai Block Off Plates
-CXracing Alum. Radiator
-25 Row Single Oil Cooler
-CXracing intercooler 5 in. Thick(still needs to be mounted and piping)
-ACT Clutch
-Single Turbo Harness
-Greddy Elbow
-Stainless Steel Oil Cooler Lines
-Stainless Steel Oil Feed line
-Stainless Steel Oil Drain line
-AST Removed

Thats all i could think of that are installed already.

Heres what it comes with HKS T4 manifold,Custom exhaust,ITS turbo(leaking oil),brand new nitto tires all tho the car doesn't come with rims so i don't know if you could use these tires but you get them anyways.

After 3 years the car still isn't under my name and i don't have a pink slip only a bill of sell from previous owner and old registration papers.

Also taking trades for well modified turbo cars that are currently registered and manual transmission plus cash depending on how much the car is worth.
-Rx7 87-95
-240sx 95+
-Anything Rotary,RB,SR Powered

$20,500
VIN-JM1FD331290204622

PM me or post for anymore info you need.

http://i49.photobucket.com/albums/f299/fdinfinirx7/NittoWebAd_RX7_1024x768.jpg
http://i49.photobucket.com/albums/f299/fdinfinirx7/l_29281fdfc175384670000232ca7ed1-1.jpg
http://i49.photobucket.com/albums/f299/fdinfinirx7/SS_4.jpg
http://i49.photobucket.com/albums/f299/fdinfinirx7/IMG_6214.jpg
http://i49.photobucket.com/albums/f299/fdinfinirx7/IMG_6281.jpg
This what the engine looks like 1 week ago
http://i49.photobucket.com/albums/f299/fdinfinirx7/IMG_6199.jpg
This is what it looks like now
http://i49.photobucket.com/albums/f299/fdinfinirx7/DSC00267.jpg

Video
MOV00084.flv video by fdinfinirx7 - Photobucket (http://s49.photobucket.com/albums/f299/fdinfinirx7/?action=view&current=MOV00084.flv)

[sidewaysil80]

seems high for a wheel-less, non-running, needing so many misc parts project...good luck regardless. i think my only regret when it comes to cars is selling my fd :(

[Chue240sx]

OMG, if I wasn't 19 and still in school I would jump on this.

[AdeJong 03]

you dont have a title and you want 20k for a car that isnt finished?

[widebodyseven]

OMG, if I wasn't 19 and still in school I would jump on this.

Good choice bc im 18 and im selling it.
Also price is flexible

[maxed1]

wow just wow and no title

[jdm538]

seen this car in person... crazy body work, chill guy.

[s13dan]

so pretty much your just selling the shell with a lot of parts....

[widebodyseven]

I fixed everything to get the car running already i just need to connect my ECU which i don't have right now.

But when i do get it running i'll post a video of it.

What is the definition of a shell?
My car comes with full exterior,interior besides door panels,rebuilt engine less than 1k mile and i could make it run too.

Picture 3,4,5 were taken in september and alot of people saw me drove the car.

The only reason i would consider this a shell is because the rims don't come with it.
Also it comes with a folder full of receipts and past DMV papers

Also here are some interior pics...
http://i49.photobucket.com/albums/f299/fdinfinirx7/DSC00239.jpg
http://i49.photobucket.com/albums/f299/fdinfinirx7/DSC00242.jpg
http://i49.photobucket.com/albums/f299/fdinfinirx7/DSC00245.jpg
Thanks JDM538

[AdeJong 03]

so how would the title get handled on the car if you never had it? is it bill of sale only?

[widebodyseven]

All i have is past registration papers and bill of sale

[FTWjesse]

holy shit, i some how knew that it was gonna be this car. sorry to see it go, thing was amazing last time i was down there.


not sure if you remember me. used to work for peter and david

[widebodyseven]

^^^
I met a couple people who work for peter and david so i don't realy know.LOL

But about the car im starting to strip it and get it ready for a bolt in cage later on and try to register it so if it does get registered im keeping it.hahaha

[BustedS13]

those dead plates that cover where the spoiler mounts are actually a pretty cool idea. i always like the look of those massive wings but it'd be nice to be able to take it off. very neat

anyway glws

[widebodyseven]

Thanks
The reason i have it is bc when i removed my wing my paint was still new so it left the outline of the wing so i had to cover it some how.

Also i could put the wing on for the track and take it off for the streets so no one calls me a ricer.LoL

[blackoutt]

Beautiful car, makes me wish I kept my fd. But before you try to ask that price get a title! GLWS ... or keeping it haha.

[Sonic Motor]

I have a S13 hatch with SR20DET (runs good and registered), tasteful mods, straight trade, lmk if u are interested.

[nathanong87]

first picture is all sorts of win. GLWS but it'll be hard to sell on these boards... why not part out the car?

[widebodyseven]

Price drop!

15K

Or trade

I think this is a more reasonable price and im going to stick with it for now.

[widebodyseven]

I have a S13 hatch with SR20DET (runs good and registered), tasteful mods, straight trade, lmk if u are interested.

Any pictures?

[widebodyseven]

first picture is all sorts of win. GLWS but it'll be hard to sell on these boards... why not part out the car?

I just posted a part out thread on rx7club but im still interested in selling it or trading.
[Part Out] 1993 rx7 suspension,engine,and interior part out! - RX7Club.com (http://www.rx7club.com/showthread.php?t=872347)

[1180g35black]

Did you get this car titled yet?

Maybe open to trade if so.

[widebodyseven]

No title......

[1180g35black]

What is the deal with the title?

[widebodyseven]

^ I don't have money, time or a car to deal with the DMV.
I also have a rx8 that got impounded and the fee is $1800 and its stuck in the impound for 1 month. This car is also forsale.LoL

[1180g35black]

If you can get it registered I may be up for a trade PM me for more info

[widebodyseven]

Your in GA im in CA.
The main reason im selling it is bc i don't want to register it bc i know the fee is going to be high and i decided to make it a track car, forgot to mention theres no headlights.

[1180g35black]

I am from Oregon and have tons of friends in Cali that could check out the car for me. Something sounds a little off with not wanting to title the car but GLWS man

[widebodyseven]

This is my last bump before i start to part out.
I really need money or trade+cash.

PM with a offer im really desperate so i'll probably take anything between 10k and 15k OBO