eightsixlife
10-23-2009, 09:05 AM
JDM RHD '95 FD full caged and spot welded bare track shell
if anyone is interested in this for a drift or track shell let me know i just wanna get it out soon, it would be perfect for any motor swap piston or rotary, it would need some custom fabbing and wiring of course but its a good platform...
WHAT IT HAS -
the stock drivers seat is re-upholstered in a non factory grey/black color. It has the stock rear hatch w/window, rear bumper is a little dented, a heat gun should undent it, driver side door w/window, front fenders have some minor dents, hood is there and has a mazdaspeed GTC style front bumper that has some cracking...
WHAT IT NEEDS -
the car has NO wiring, brake lines are there but not installed, interior, dash, or steering column, and the passenger side door is missing, currently has bilstein shocks with aftermarket springs which i put up for sale so it may come with stock suspension, no paperwork as this car is made to be a track car...
the car does need work, a lot of custom wiring and such would be best... perfect for a shop or pro racer/drifter that has recently crashed and is in need of a new chassis, or if someone wants to build a track and drift car or wants to try a right hand drive setup...
all it really needs is a motor, wiring, stock or aftermarket cluster, suspension and drivetrain components and your good to go on the track and of course body work and paint...
THE CAGE -
again the fabrication for this car is TOP NOTCH work, the welds are really nice and part of the cage is also welded into the roof, there are plates that are also welded in to the front and rear pillars, the engine bay and trunk areas were also spot welded, and the trunk area was reinforced and cut out for a fuel cell already...
i received this car in a trade and got some extra parts to sell, i contacted a few shops i go to to see what the car and fabrication was worth, i got two people to tell me 2500 just in fabrication work but of course seeing as how this needs work im flexible...
dont be afraid to throw a (reasonable) price at me if interested, it needs to go soon...
here are some parts i have for sale which i can add also and make package deals...
No linksthanks for looking!
[/B]
if anyone is interested in this for a drift or track shell let me know i just wanna get it out soon, it would be perfect for any motor swap piston or rotary, it would need some custom fabbing and wiring of course but its a good platform...
WHAT IT HAS -
the stock drivers seat is re-upholstered in a non factory grey/black color. It has the stock rear hatch w/window, rear bumper is a little dented, a heat gun should undent it, driver side door w/window, front fenders have some minor dents, hood is there and has a mazdaspeed GTC style front bumper that has some cracking...
WHAT IT NEEDS -
the car has NO wiring, brake lines are there but not installed, interior, dash, or steering column, and the passenger side door is missing, currently has bilstein shocks with aftermarket springs which i put up for sale so it may come with stock suspension, no paperwork as this car is made to be a track car...
the car does need work, a lot of custom wiring and such would be best... perfect for a shop or pro racer/drifter that has recently crashed and is in need of a new chassis, or if someone wants to build a track and drift car or wants to try a right hand drive setup...
all it really needs is a motor, wiring, stock or aftermarket cluster, suspension and drivetrain components and your good to go on the track and of course body work and paint...
THE CAGE -
again the fabrication for this car is TOP NOTCH work, the welds are really nice and part of the cage is also welded into the roof, there are plates that are also welded in to the front and rear pillars, the engine bay and trunk areas were also spot welded, and the trunk area was reinforced and cut out for a fuel cell already...
i received this car in a trade and got some extra parts to sell, i contacted a few shops i go to to see what the car and fabrication was worth, i got two people to tell me 2500 just in fabrication work but of course seeing as how this needs work im flexible...
dont be afraid to throw a (reasonable) price at me if interested, it needs to go soon...
here are some parts i have for sale which i can add also and make package deals...
No linksthanks for looking!
[/B]