PDA

View Full Version : TX S13 SR motor part out everything must go!! extras and upgrades


RurouniMidnight
10-22-2009, 07:43 PM
So i spun a bearing in my motor at Lonestar Bash...:( im selling everything off of it heres the list ill try and take pictures as i go and post them up for the parts, my baby gave me years of enjoyment but i want to try out a different setup. If there is anything i didn't list that you might be intrested in that can be shipped pm me and ill let you know. All prices include shipping but please include 3% paypal fee Thanks.

Greddy turbo elbow $110
http://www.axiomotion.com/files/26/gelbow.jpg
http://www.axiomotion.com/files/26/gelbow%202.jpg
Kazama auto Catch can, for use with fan shroud $100
http://www.axiomotion.com/files/26/kazama%20catch%20can.jpg
http://www.axiomotion.com/files/26/kazama%20catch%20can%202.jpg
Hallman RX pro manual boost controller $70
http://www.axiomotion.com/files/26/mbc.jpg
http://www.axiomotion.com/files/26/mbc%202.jpg
Nismo motor and tranny mounts Sold
Lightweight aluminum pullys were red kinda pink now Sold
F1 14lb chromoly flywheel $90
http://www.axiomotion.com/files/26/fly.jpg
Spec stage 3 clutch has about 65% life left pressure plate springs are all good $190
http://www.axiomotion.com/files/26/spec%20clutch.jpg
Custom painted valve cover by Richard Rabe out in cali, small wear spot from hood $120
http://www.axiomotion.com/files/26/Dtown%20photo%20shoot%2014.jpg
Tomei orniment plate Sold
Tomei rocker arm stoppers Sold
Tomei oil cap Sold
Converted engine harness for S14 with s13 SR ready to rock $250 Pending
#62 redtop ecu $80
sr alternator SOLD
sr starter SOLD
4 clean coil packs no harness $80
http://www.axiomotion.com/files/26/coil%20packs.jpg
4 370cc injectors w/ new oem rail Pending
http://www.axiomotion.com/files/26/injectors%20sale.jpg
iacv $70
intake mani $30
CAS Sold
Timing chain tensioner $40
http://www.axiomotion.com/files/26/cas.jpg
circut sport stainless bottom mount turbo lines Sold
T25 inlet and outlet pipes $40
Nismo thermostat $20
http://www.axiomotion.com/files/26/nismo%20thermo.jpg
http://www.axiomotion.com/files/26/nismo%20thermo%202.jpg
KA powersteering pump Sold
Aluminum intake pipe with couplers and clamps Sold
S13 SR maf $40
Water neck temp sensor adaptor $45
http://www.axiomotion.com/files/26/water%20adapter.jpg

RurouniMidnight
10-23-2009, 11:24 PM
updated, added a few more pics.

JrockS13
10-25-2009, 04:09 AM
I'll take the thermostat and are you nego. on the clutch i think 220 is too much for a used clutch..lmk

kevmeistah21
10-25-2009, 04:41 AM
do you still have the stock t25? also interested in pulleys

TurboDaytona
10-25-2009, 09:17 AM
I will take the pulleys.. Let me know where to paypal.

RurouniMidnight
10-25-2009, 10:38 AM
I'll take the thermostat and are you nego. on the clutch i think 220 is too much for a used clutch..lmk

Pmed

do you still have the stock t25? also interested in pulleys

T25 is blown the pulleys are pending right now, ill let you know.

JoshDank
10-25-2009, 10:52 AM
i'll take the intake pipe if you still have it on Wednesday

docrez
10-25-2009, 10:27 PM
I'll thake the CAS shipped to 92308?

kaking
10-26-2009, 12:48 AM
ill take the intake pipe with couplers, i have money now

ReLevent1
10-27-2009, 09:54 PM
payment sent for turbo lines and ras.

RurouniMidnight
10-30-2009, 02:59 PM
dropped the prices on everything left and updated parts that were sold need to move it all haha.

TurboDaytona
10-31-2009, 07:26 AM
Hey, i bought the pulleys from him. exactly as described, and fast shipping. Good seller!

bui
10-31-2009, 11:18 AM
Bump for my friend Justin!

GLWS!

vash_S14
10-31-2009, 11:57 AM
Ill take the Greddy elbow for $100, shipped to 90815? LMK, TIA!