PDA

View Full Version : Thread pitch for fender bolts on s14??

driftpolice
10-21-2009, 03:37 PM
does anyone know the thread pitch for the 6mm bolts that hold the top of the fenders on s14? I broke two off and need to drill them out and tap them, and need to know what size tap to buy. thanks!
JEDIs13
10-21-2009, 03:41 PM
does anyone know the thread pitch for the 6mm bolts that hold the top of the fenders on s14? I broke two off and need to drill them out and tap them, and need to know what size tap to buy. thanks!


take one of your bolts that is not broken and go to autozone.
they have a little plate with holes and bolts of all different sizes.
find the hold your bolt fits into and grab some replacements.
make sure you get the right length

done and done.
Devil Man
10-21-2009, 03:47 PM
im 99% sure its all 1.25 on our cars.

any average tap and die set that is metic will have what you need. once you reverse out the broken screw you can stick the tap into the hole to see which one mates best with it, or compare it to another good screw.
lok
10-21-2009, 03:51 PM
m6x1.00

msglngth
projectRDM
10-22-2009, 02:17 AM
+1. There aren't any M6x1.25 bolts anywhere on any Nissan.

M6x1.0 is what you want.
godrifttoday
10-22-2009, 02:19 AM
+1. There aren't any M6x1.25 bolts anywhere on any Nissan.

M6x1.0 is what you want.

there are no m6x1.25... if im not mistaken... but im sure there are none.. fender yes m6x1.0
IIIXziuR
10-22-2009, 06:11 AM
M6 yes not 6mm, OP.
Just wanted to clarify that.