parting out 91 240 hatchback everything must go

[PARAD0X]

i'm parting out my 1991 240 hatchback. the car was just in a wreck so i don't have the front right fender or the suspension to give away. the engine runs great. its a 1995 KA (has s13 cams) with ~85k on it.
located about 40 miles northeast of Atlanta, GA

any questions:
just write it here, PM me, or email me at [email protected]


has injen intake short ram for s14 engine 50
obx short shifter 50
momo shift knob 50
apexi n1 single exhaust(only used for +/-3 months 350

also, the car used to be red but it is currently primered grey.

if anyone would like pics, i'd be more than willing to oblige.

Josh

[PARAD0X]

also have a system for sale.
1-12" bazooka sub with box 125
sony xplod 760w amp 150
kenwood excelon z919 mp3/cd player w/ remote 200

all in great condition

[91CRXsiR]

a/c compressor?

[PARAD0X]

make an offer

[PARAD0X]

will sell car as is for 2200. appears to just need shock and fender. also has a grapefruit size dent on the rear quarter panel

http://www.imagestation.com/picture/sraid61/p0a683e0495d20be6ef44717eb5cffecd/fc37135e.jpg

http://www.imagestation.com/picture/sraid61/p9ff58aa5108e0fef579c1d654a6a1c95/fc2d1ff0.jpg

http://www.imagestation.com/picture/sraid61/p4e39c44bf2f60751586ac1efc707f41b/fc2d1ff9.jpg

[S14DriftR]

If that injen intake is complete and in good shape ill take it.

[PARAD0X]

it will only include the intake pipe. i'll throw in the filter and adapter for 10$ more. to make it 60 plus shipping

[S14DriftR]

Do you have all the hoses and clamps? Everything needed to install? And what kind of shape is the filter in, do you know how many miles are on it?

[PARAD0X]

yeah, everything needed. the filter probably has 8-12k on it

[PARAD0X]

i'm not sure how much these things go for so just shoot me an offer and odds are i'll take it

[91CRXsiR]

does the Injen intake fit a S13 DOHC?


if so how about 100 for ac compressor and intake shipped

[PARAD0X]

the intake will worth with the earlier dohc but it takes some custom work. i learned the hard way. i'd recommend getting the one for the 91-94. how about 50 for the ac compressor + shipping

[andrave]

I want the driver's side rear marker light and the little socket that holds the bulb in, with a couple inches of wires attatched.

would also be interested in the glovebox hinges.

[email protected]

thank you kindly.

[91CRXsiR]

what kind of custom mods are we talking about for the intake? i was going to go custom anyways,so i dont mind a lil extra work.. hows that short shifter shift?

[s30]

Does your car have that window amp box on the driver side?
If so would you sell it, for how much?

[PARAD0X]

car was a base model so no window box thing.
custom work would be finding places for the lines. the IAC valve doesn't connect right, so i had to custom do that. i can take pics to explain it more, but PM me about that

short shifter,...i think yoshi's getting that. or atleast thats how i took his message this morning

[PARAD0X]

short shifter it sold

[PARAD0X]

i also have some stock s14 alloys. 300 obo plus shipping, thanks

[driftk2000]

so you have an s13 with an s14 motor in it??
I'm interested in a complete motor/manual tranny/ecu/uncut harness.

[DamnedButDetermined]

I need the metal rings that go around the light bulbs in the headlights (both sides). I also need the black plastic molding that screws in from both sides of the headlight (passenger side only).

How does $30-shipped sound for those three items?

If you need more information about what parts i am talking about just ask and i will try to discribe them better.

thanks

[S14DriftR]

Can you find out the shipping for the intake to 93117? What kind of payment do you want?

[StreetConcept]

How much are you asking for the cams??

[sykikchimp]

Sup man! I PMed you.. The s14 alloys are the 5-lug 16x6.5 wheels right? from the SE S14? If so I am interested.. I'm in Charlotte, so maybe we can hook something up.

[PARAD0X]

so you have an s13 with an s14 motor in it?? I'm interested in a complete motor/manual tranny/ecu/uncut harness.

yes, its a 95 KA into a 91. the engine has about 85-86k on it.

I need the metal rings that go around the light bulbs in the headlights (both sides). I also need the black plastic molding that screws in from both sides of the headlight (passenger side only). How does $30-shipped sound for those three items? If you need more information about what parts i am talking about just ask and i will try to discribe them better. thanks


i know exactly what you are talking about. i can get those for you. PM me or email at [email protected] to get my address. i'm only able to accept check or money order. no paypal, sorry guys

Can you find out the shipping for the intake to 93117? What kind of payment do you want?


sure can. its gonna be roughly 15 for ups ground. for payment, also email me at [email protected] to get my address so you can send a check or money order

How much are you asking for the cams??


i'd like to sell them with the engine. sorry

Sup man! I PMed you.. The s14 alloys are the 5-lug 16x6.5 wheels right? from the SE S14? If so I am interested.. I'm in Charlotte, so maybe we can hook something up.


sup man, i got your PM and i replied. and yes sir, those are the s14 alloys you're thinking of. 5 spokes. we may be able to hook up. i'm without a car, but my friend be able to give me a ride to greenville or somewhere in southcarolina or something. that will save you a good bit of shipping costs.

[driftk2000]

you got pm.

[driftk2000]

you got pm.

[240meowth]

i offer 10 dollars for the ash tray that's infront of the shifter? the one that's next to the e-brake,

[PARAD0X]

sent you a PM

[StreetConcept]

damn i was hoping u would sell the cams... also i was looking for 91 cams anyhow.. damn oh well nevermind good luck selling everything

[bluman]

How much for the left (driver's side) fender and the rear hatch assuming they aren't dented and don't have any rust?

[PARAD0X]

no rust and both are primered ready to be painted. the hatch, i'll let go for 110 + shipping and the fender for 75 + shipping. remember these have been primered so they will be ready to put on and be painted. no sanding, primering involved. i've already done that work for you

[driftk2000]

you have PM

[str8drift]

dude, i just emailed you...my name's rico i'm from atlanta...i need some parts dude. gimmie a call. 4045794901

[PARAD0X]

hey buddy, i got it. i'm gonna have my cell phone with me today but i'm gonna be at road atlanta for the motorcycle races. so just give me a call.

[kandyflip445]

I'll take the trim that is in the middle console it goes around the shifter,ashtray,and stuff. How much you want? Just pm me.:D

[andrave]

I wonder if your car has the black trim tape along the bottom.
I am missing the piece on the rear quarter, between wheel and bumper.

[Squirt724]

prices for hood, hood hinge, left fender, left headlight w/ motor, front bumper, rear sidemarkers shipped to 92507? email me reply at [email protected] because i don't check here often.

[justink]

if you are still parting the car out, what color is the interior? i'll take the ashtray if it's black/grey (not sure). send a picture if you can. pm me

[PARAD0X]

ashtray already sold

[PARAD0X]

i'll be pulling things all this week. if anyone wants interior pieces. they are in great condition. also i can take pics of anything if anyone wants it. i'm gonna go pull the interior panels in a few minutes and get the seats out.

[PARAD0X]

kandyflip445, andrave, and Squirt724

sorry i took so long to respond guys. i didn't see your posts. But i've either PM'd you or email'd you. Thanks for your interest and keep em coming. i still have alot of a car left to sell

[driftk2000]

Still got the PS lines, N1 Exhaust(full catback?).

[PARAD0X]

yes sir. if you want those too, i can send them along when i send the engine up to you. you got my address and stuff so i'll PM you to tell you prices. i can probably do 400 shipped;)

[driftk2000]

Originally posted by PARAD0X
yes sir. if you want those too, i can send them along when i send the engine up to you. you got my address and stuff so i'll PM you to tell you prices. i can probably do 400 shipped;) hmmmm. for both the catback and PS lines? What size piping is the N1? Is the N1 for N/a cars?

[PARAD0X]

this is teh N1 for the turbo, its the single though. yeah for both. i PM'd you with more info

[PARAD0X]

still taking alot of stuff off. if anyone needs anything still, just let me know

[PARAD0X]

still taking alot of stuff off. if anyone needs anything still, just let me know

[tmerrick]

The ring around the center vents above the center console.
Plastic piece that holds the power window controls on the door panel both left and right side.
There is a small metal piece that holds the floor mats in place. There is a circle on the floor mats and the metal piece goes in there and hooks onto a metal piece under the seat.
Also the splash guard that goes under the entire engine bay?

Please email me back @ [email protected] i dont check zilvia much

[PARAD0X]

i emailed you buddy. and i sold the hatch today, so thats gone.

[DamnedButDetermined]

Originally posted by PARAD0X




i know exactly what you are talking about. i can get those for you. PM me or email at [email protected] to get my address. i'm only able to accept check or money order. no paypal, sorry guys



Sorry i don't need those parts any more, i figured out how to fix them. I do however need the plastic fender linning for the front driver's side. If there are plastic fender linners for the rear then i will also need those as well. Just to be clear this is the black plastic linning that will keep water from splashing on my cai filter. I will also need the plastic screws that hold it to the fender.

thanks
-DbD-

[PARAD0X]

yeah man, i'll try to get that out this weekend and get you shipping prices.

[spec-d]

I need the plastic that goes around the left
headlight assembly. Plus the Coolant overflow.
Let me know how much?

[DrifTkInG180sX]

hey what's up i was wondering how much you would sell the A/C compressor and EGR valve and will it work with a SOHC. thanks

[TheSparo]

how much for the front bumper?

[PARAD0X]

I need the plastic that goes around the left headlight assembly. Plus the Coolant overflow. Let me know how much?

i still have the headlight assembly. coolant overflow has been sold

hey what's up i was wondering how much you would sell the A/C compressor and EGR valve and will it work with a SOHC. thanks

no longer have either. sorry

how much for the front bumper?

75+shipping. its got some pretty deep paint chips. it will probably need to go to a body shop to be fixed. i'm not trying to deter you, i just don't want to get a bad rep for selling a bad product

[PARAD0X]

all after market parts are sold

[spec-d]

On the left headlight assembly, I only need the
plastic piece that goes around the headlight
plus the left headlight bracket minus the headlight.
I'll give you $30.00 plus shipping to 91709.
TIA

[Drew12]

Did it have power windows? If so how much for the power window buttons on the drivers side?

[thirteenlashes]

How much for the black cubby underneath the radio bracket?

[email protected]

[TheSparo]

what condition are the motor mounts in? and how much would you want for them?

[drtyfawkr]

i am in ATL man... i need to know if you still have the center console? i need the lid for the part behind the ashtray... i know that's not to descriptive, but i think you know what i mean. anyways, mines hanging on by a bracket and is becoming very annoying, so if you have the center console lemme know how much you want. ( i don't need the ashtray part, so that's not a problem)

thanks
mike

[PARAD0X]

nah Sykikchimp has my center console

[Hi-Rev]

How much for the middle tail light that says 240sx if not cracked or damaged? And the third brakelight? And what is the interior color?

[PARAD0X]

i'll take 30 for the middle tail light...its in perfect condition. since the car died, that was one of the first things i took off and its been hangin out in my rooms. nice and shiney. third brake light...how about 10. interior color is grey/black. however the seats aren't so hot, but the rest of the interior is great. email me if you're interested. [email protected]

Josh

[PARAD0X]

also i will only be taking orders on parts for a few more weeks. the car is basically stripped now with just a few parts remaining. please still contact. hopefully it will be leaving my driveway soon...

all suspension/brake pieces are on the car...just one broken shock in the front right. otherwise its good

[manos1984]

I need the u shaped pipe that comes out of the lower part of the stock header that curves around the steering shaft. if you still have it let me know how much shipped.
thanks
mark

[PARAD0X]

sorry, i dont' have the downpipe or the exhaust manifold anymore

[reccakun08]

do u have driver side power window plastic button piece? hatchback interior carpet? hatchback itself? thx

[niSm095]

reccakun, check your PMs

[PARAD0X]

nah i had a base model

[iamwesley]

Can you send pictures of your OBX shifter and n1 Exahust?.. how much for both? how much to ship to VA.. let me know. [email protected]

[brokenben]

so i guess the dash is gone by now? if not..is it black?.. good condition?

[PARAD0X]

the dash is still in the car. it is black. but i'd prefer pickup only on such a big item

[AgaricX]

Would you ship the rear bench seats?

[PARAD0X]

possibly. PM me

[Sh0wty]

I need Rear suspension if it is in good condition.

Also need
Drivers Side
Radiator
Clutch Pump
Slave Cylinder

[PARAD0X]

rear suspension as in shocks/springs?
i wouldn't recommend the clutch items, they needed to be replaced. i can do teh radiator

[Sh0wty]

Just the radiator, How much?