jspaeth
10-18-2009, 04:41 PM
For sale is a bunch of SR stuff.....in cases where relevant, I list WHY I am selling it....in every case, the part works, but has just been replaced by something better.
Scroll down for picture and description of each part.
*********I MAY BE FLEXIBLE ON SOME PRICES***************
List:
*** In all cases where relevant, the parts are off of a blacktop S13 SR20det.
Nismo FPR................................SOLD
Stock FPR.................................SOLD
Stock Cams...............................$30 each, or $50/pair + shipping
Stock Intake Manifold.................SOLD
Used Greddy Cold Pipe for S14....$20 + shipping (read below please)
NEW Cold pipe for Greddy IM.......$20 + shipping (read below please)
Stock J4 ECU..............................$150 + shipping
Stock T25/turbo elbow...............$150 + shipping
Stock MAF sensor, no pigtail........$ 50 + shipping
Stock S13 waterneck...................$ 20 + shipping
Stock flywheel............................$ 50 + shipping
Stock 370cc/min injectors...........$ 30 each or $100/set + shipping
Shitty Chinese HIDs.....................$5 + shipping
DETAILED LIST:
Stock Cams...............................$30 each, or $50/pair + shipping
Just took these off since I added HKS step 2 cams.....were running just fine and making no noise. DOES NOT include cam gears
http://makingapril.com/greg/justin/ForSale/15.JPG
Used Greddy Cold Pipe for S14....$20 + shipping
I needed to get a special pipe for the Greddy intake mani....this pipe is not cracked, but is kind of dirty and HAS A THREADED HOLE DRILLED NEAR THE THROTTLE BODY END where I had my Intake Air Temp. sensor installed.
http://makingapril.com/greg/justin/ForSale/13.JPG
http://makingapril.com/greg/justin/ForSale/14.JPG
NEW Cold pipe for Greddy IM.......$20 + shipping
Bought this cold pipe NEW for $60 from Courtesy Nissan, but never used it.....IT IS SUPPOSED to work for an S14 GREDDY Intercooler kit connecting to a S13 Greddy intake manifold.
http://makingapril.com/greg/justin/ForSale/21.JPG
Stock J4 ECU..............................$150 + shipping
Had this sitting around, since I now have a PowerFC.....NOT reflashed, stock J4 ECU....was working perfectly with no problems when I took it out.
http://makingapril.com/greg/justin/ForSale/1.JPG
Stock T25/turbo elbow...........$150 + shipping
The turbo was replaced by a GT2871R, but was working PERFECTLY when I took it off...no smoke, NO SHAFT PLAY...
DOES NOT INCLUDE STOCK OIL DRAIN, and INCLUDES GASKET BETWEEN ELBOW AND TURBINE.....comes with OIL feed line and ONE OF THE TWO water lines.
http://makingapril.com/greg/justin/ForSale/2.JPG
http://makingapril.com/greg/justin/ForSale/3.JPG
http://makingapril.com/greg/justin/ForSale/4.JPG
http://makingapril.com/greg/justin/ForSale/5.JPG
Stock MAF sensor, no pigtail........$ 50 + shipping
Was working just fine when I replaced my ECU with a D-Jetro PowerFC (didn't require a MAF sensor)....just the sensor, not pigtail.
http://makingapril.com/greg/justin/ForSale/8.JPG
http://makingapril.com/greg/justin/ForSale/9.JPG
Stock S13 waterneck...................$ 20 + shipping
Replaced this with an S14waterneck to allow turbo water recirculation, but not cracked, just fine
http://makingapril.com/greg/justin/ForSale/10.JPG
Stock flywheel............................$ 50 + shipping
Just recently bought a Prolite ACT flyhweel....this was working beautifully....no rust, no cracks....has NOT been resurfaced, but clutch was NOT slipping before I removed it.
http://makingapril.com/greg/justin/ForSale/26.JPG
http://makingapril.com/greg/justin/ForSale/27.JPG
Stock 370cc/min injectors...........$ 30 each or $100/set + shipping
These were working fine....were removed in place of 740cc injectors when I upgraded turbo. Notice that on 2 of the injectors, the plastic clips near the sprayers are missing partially, and on the top side of one, the plastic is slightly cracked. I DO NOT believe this will effect performance.
http://makingapril.com/greg/justin/ForSale/25.JPGhttp://makingapril.com/greg/justin/ForSale/24.JPG
Shitty Chinese HIDs.....................$5 + shipping
Got these for free from a friend. Have NO CLUE what the hell they are. If you buy something else and want them, I will throw them in for free.
http://makingapril.com/greg/justin/ForSale/19.JPG
Please PM me or respond if you are interested.
Thanks,
Justin
Scroll down for picture and description of each part.
*********I MAY BE FLEXIBLE ON SOME PRICES***************
List:
*** In all cases where relevant, the parts are off of a blacktop S13 SR20det.
Nismo FPR................................SOLD
Stock FPR.................................SOLD
Stock Cams...............................$30 each, or $50/pair + shipping
Stock Intake Manifold.................SOLD
Used Greddy Cold Pipe for S14....$20 + shipping (read below please)
NEW Cold pipe for Greddy IM.......$20 + shipping (read below please)
Stock J4 ECU..............................$150 + shipping
Stock T25/turbo elbow...............$150 + shipping
Stock MAF sensor, no pigtail........$ 50 + shipping
Stock S13 waterneck...................$ 20 + shipping
Stock flywheel............................$ 50 + shipping
Stock 370cc/min injectors...........$ 30 each or $100/set + shipping
Shitty Chinese HIDs.....................$5 + shipping
DETAILED LIST:
Stock Cams...............................$30 each, or $50/pair + shipping
Just took these off since I added HKS step 2 cams.....were running just fine and making no noise. DOES NOT include cam gears
http://makingapril.com/greg/justin/ForSale/15.JPG
Used Greddy Cold Pipe for S14....$20 + shipping
I needed to get a special pipe for the Greddy intake mani....this pipe is not cracked, but is kind of dirty and HAS A THREADED HOLE DRILLED NEAR THE THROTTLE BODY END where I had my Intake Air Temp. sensor installed.
http://makingapril.com/greg/justin/ForSale/13.JPG
http://makingapril.com/greg/justin/ForSale/14.JPG
NEW Cold pipe for Greddy IM.......$20 + shipping
Bought this cold pipe NEW for $60 from Courtesy Nissan, but never used it.....IT IS SUPPOSED to work for an S14 GREDDY Intercooler kit connecting to a S13 Greddy intake manifold.
http://makingapril.com/greg/justin/ForSale/21.JPG
Stock J4 ECU..............................$150 + shipping
Had this sitting around, since I now have a PowerFC.....NOT reflashed, stock J4 ECU....was working perfectly with no problems when I took it out.
http://makingapril.com/greg/justin/ForSale/1.JPG
Stock T25/turbo elbow...........$150 + shipping
The turbo was replaced by a GT2871R, but was working PERFECTLY when I took it off...no smoke, NO SHAFT PLAY...
DOES NOT INCLUDE STOCK OIL DRAIN, and INCLUDES GASKET BETWEEN ELBOW AND TURBINE.....comes with OIL feed line and ONE OF THE TWO water lines.
http://makingapril.com/greg/justin/ForSale/2.JPG
http://makingapril.com/greg/justin/ForSale/3.JPG
http://makingapril.com/greg/justin/ForSale/4.JPG
http://makingapril.com/greg/justin/ForSale/5.JPG
Stock MAF sensor, no pigtail........$ 50 + shipping
Was working just fine when I replaced my ECU with a D-Jetro PowerFC (didn't require a MAF sensor)....just the sensor, not pigtail.
http://makingapril.com/greg/justin/ForSale/8.JPG
http://makingapril.com/greg/justin/ForSale/9.JPG
Stock S13 waterneck...................$ 20 + shipping
Replaced this with an S14waterneck to allow turbo water recirculation, but not cracked, just fine
http://makingapril.com/greg/justin/ForSale/10.JPG
Stock flywheel............................$ 50 + shipping
Just recently bought a Prolite ACT flyhweel....this was working beautifully....no rust, no cracks....has NOT been resurfaced, but clutch was NOT slipping before I removed it.
http://makingapril.com/greg/justin/ForSale/26.JPG
http://makingapril.com/greg/justin/ForSale/27.JPG
Stock 370cc/min injectors...........$ 30 each or $100/set + shipping
These were working fine....were removed in place of 740cc injectors when I upgraded turbo. Notice that on 2 of the injectors, the plastic clips near the sprayers are missing partially, and on the top side of one, the plastic is slightly cracked. I DO NOT believe this will effect performance.
http://makingapril.com/greg/justin/ForSale/25.JPGhttp://makingapril.com/greg/justin/ForSale/24.JPG
Shitty Chinese HIDs.....................$5 + shipping
Got these for free from a friend. Have NO CLUE what the hell they are. If you buy something else and want them, I will throw them in for free.
http://makingapril.com/greg/justin/ForSale/19.JPG
Please PM me or respond if you are interested.
Thanks,
Justin