isimon91
10-13-2009, 08:22 PM
Name: Ian
Location: Chicago
Asking Price: Make an offer
Shipping: At the buyer's expense
Email: [email protected] (http://zilvia.net/f/[email protected]) (best way to contact me)
__________________________________________________ _____________
Selling my SR swap, going for a different motor setup..Motor is being finished this week, and I'm looking for an N/A setup for my car.
Freshly rebuilt 2.4L SR20DET motor
-TiTech (Denzo) 550cc Injectors
-NGK Plugs
-Jim Wolf S4 Cams
-90mm Forged CP Pistons
-Forged Crank
-Darton hi-strength cylinder sleeves
-Eagle Forged H Rods
-ACL Race Rod Bearings
-ACL Race Main Bearings
-All new timing components
-Newly machined shortblock, and rebalanced and honed head
-90mm Cosworth Multi-layer steel head gasket (1.5mm thickness)
-All new gaskets
-Painted valve cover
Turbo Setup:
-Garrett T3/T4 57trim 60 comp turbo
-Greddy Black Face Boost Gauge
-HKS Turbo timer
-Greddy Profec B boost controller
-T3/T4 57 Trim 60 Comp Turbo
-Peakboost Top Mount Turbo Manifold
-Peakboost 3inch Downpipe
-External 38mm Tial Wastegate with 1Bar Spring and Peakboost Dumptube
-Taka Motorsports SS Oil lines
-Apexi GT Spec Exhaust
-Greddy Intake Manifold
-Greddy Intake Cold Pipe
-Greddy Front Mount VSPL Intercooler
-HKS SSQV BOV
-Z32 Mass Airflow Sensor
-Greddy Oil Catch Can
More:
--S13 SR Trans (around 50,000 miles, shifts smooth no grinds)
-6 Puck Act Clutch and Pressure Plate
-Stock SR Flywheel
-Nissan Electric fan
-Nismo Motor Mounts
http://i254.photobucket.com/albums/hh86/isimon91/IMG_0293.jpg
http://i254.photobucket.com/albums/hh86/isimon91/IMG_0295.jpg
http://i254.photobucket.com/albums/hh86/isimon91/240sx%20Coupe/DSCF0436-2.jpg
Most recent engine bay picture I have with the entire swap, it was last year before the motor was built. The rings on the motor had fried, so I built the shortblock.
Please don't waste my time, if you have a serious offer just send me a PM. Thanks.
Location: Chicago
Asking Price: Make an offer
Shipping: At the buyer's expense
Email: [email protected] (http://zilvia.net/f/[email protected]) (best way to contact me)
__________________________________________________ _____________
Selling my SR swap, going for a different motor setup..Motor is being finished this week, and I'm looking for an N/A setup for my car.
Freshly rebuilt 2.4L SR20DET motor
-TiTech (Denzo) 550cc Injectors
-NGK Plugs
-Jim Wolf S4 Cams
-90mm Forged CP Pistons
-Forged Crank
-Darton hi-strength cylinder sleeves
-Eagle Forged H Rods
-ACL Race Rod Bearings
-ACL Race Main Bearings
-All new timing components
-Newly machined shortblock, and rebalanced and honed head
-90mm Cosworth Multi-layer steel head gasket (1.5mm thickness)
-All new gaskets
-Painted valve cover
Turbo Setup:
-Garrett T3/T4 57trim 60 comp turbo
-Greddy Black Face Boost Gauge
-HKS Turbo timer
-Greddy Profec B boost controller
-T3/T4 57 Trim 60 Comp Turbo
-Peakboost Top Mount Turbo Manifold
-Peakboost 3inch Downpipe
-External 38mm Tial Wastegate with 1Bar Spring and Peakboost Dumptube
-Taka Motorsports SS Oil lines
-Apexi GT Spec Exhaust
-Greddy Intake Manifold
-Greddy Intake Cold Pipe
-Greddy Front Mount VSPL Intercooler
-HKS SSQV BOV
-Z32 Mass Airflow Sensor
-Greddy Oil Catch Can
More:
--S13 SR Trans (around 50,000 miles, shifts smooth no grinds)
-6 Puck Act Clutch and Pressure Plate
-Stock SR Flywheel
-Nissan Electric fan
-Nismo Motor Mounts
http://i254.photobucket.com/albums/hh86/isimon91/IMG_0293.jpg
http://i254.photobucket.com/albums/hh86/isimon91/IMG_0295.jpg
http://i254.photobucket.com/albums/hh86/isimon91/240sx%20Coupe/DSCF0436-2.jpg
Most recent engine bay picture I have with the entire swap, it was last year before the motor was built. The rings on the motor had fried, so I built the shortblock.
Please don't waste my time, if you have a serious offer just send me a PM. Thanks.