300z Break Swap???

[nguyenk2003]

Hey!

I wanted to know if I do a 300Z brake Swap does it matter if its the 300Z Turbo brokes or not? and If I do the swap do I get the Teins for 300z or S14?

Thanx!

[Chernobyl]

You still need coilovers for the s14, but if you switch the rear uprights to the aluminum ones from a z32, you'll have different mounting styles for the bottom of the rear coilover. Some coilovers allow you to change the lower mounting style, i don't know about the teins.

As far as I know, all z32 brakes are the same size, NA or Turbo, unless you get the smaller iron calipers from an early (~90) NA.

Hope this helps some. Do a search, there is lots of info on this site for both your questions.

[ca18guy]

All Z32 rear brakes are the same. The front ones are different between the TT and the N/A. The TT is 30mm and the n/a has 24mm calipers I believe.

[24D]

Check out www.importnut.net it has a write up on the brake swap both front and back.

Edited web address.

[FRpilot]

Originally posted by ca18guy
All Z32 rear brakes are the same. The front ones are different between the TT and the N/A. The TT is 30mm and the n/a has 24mm calipers I believe.

i think the n/a are 26mm.. anyways.. the only 300zx things you gotta get are probably brake pads, rotors. you're spindles and hubs should be the same unless you are planing to do a 5 lug swap.. in that case, then you might need to get coilvers specced for 300zx.