PDA

View Full Version : ka24e coolant not flowing. cold lower rad hose


240sxrb25
10-03-2009, 09:20 PM
i have a 1990 240 with the ka24e and the car takes a very long time (30 minutes) for the heat to work at its best. the heater core is not clogged, the radiator is not clogged, new water pump, new thermostat.

the lower radiator hose never heats up at all, but the upper is very hot.

im out of ideas, why doesnt the lower hose heat up, takes so long to create good heat inside the car.

thanks

Slammed Assassin
10-03-2009, 09:28 PM
make sure you properly bled your cooling system, there may be a air pocket. and are you sure your thermostat is opening up? any signs of overheating?

240sxrb25
10-03-2009, 09:30 PM
doesnt ever overheat.

i had the front of the car in the air running for like 15 minutes today squeazing tubes. i cant gt any more coolant in. only about a gallon went in

Slammed Assassin
10-03-2009, 09:39 PM
did you raise up the front of the car and run the heater while you were bleeding it? as long as your not overheating you should be fine.

brewster240
10-03-2009, 09:49 PM
where did you get tstat?

id pull it out and see what happens.

sil80 monster
10-03-2009, 10:13 PM
ya make sure the thermostat is good and isn't in backwards