Which clutch to get?

[onefst240]

Well i have a s13 blacktop sr20 and a t3/t04e turbo. I found a thread that had pretty much the same setup and it made 440rwhp and around 360ft lbs. I was wondering if someone could help me out with getting a clutch for it. I originally was going to get a spec clutch but after i read about it they said it slipped after the first week driving so i started to look at exedy stage 2 and i might have made my mind up but wanted to get others opinions before buying. Any help i would appreciate. car will be street and drag race drivin. Thanks

[MADE]

Everyone will recommend the one they have used successfully and not something that might be as good but never tried. I say go with something that is going to hold more than your target torque figures.

Iv'e used OEM Nissan and ORC Clutches and everytime my OEM clutch outlasted the ORC.(Maybe my bad luck) Some people who love them. This time around Im going with the ACT 6 puck Sprung to see how I like it.

[jr_ss]

RPS Max Street, or any stg 2 and up would/should be sufficient. You get what you pay for, so if you buy a cheap clutch kit, expect it to be just that, cheap. I've seen/read about guys using the Exedy Stg 2 with good results. I'm running the RPS on my car.

[dopplganger1]

(615) 242-4163 Tennessee clutch and supply
give them a call ask for a competition clutch for a 89 maxima my was 150 with everything also ask for the 240sx throwout bearing because the maxima one does not work. and ask for a lighter pressure plate if you want it closer to stock feel i got the 1600lb one and like it and its good for about 450 to 500 torque