s14 sr20 wiring harness delema

[scooz14]

hello guys
im kinda stuck here. i have an 89 hatch with a broken single slammer. i dont feel it is worth it to rebuild the kae, so i decided i would put an sr in it. a buddy of mine had a notch top sr swap. he wanted 1500 for it. we met up and he gave me a story of how he cant find the harness or ecu, but had pictures of the entire swap. i trusted him, did a leak down test, all came back good, so i gave him 900 for the motor and trans. he said he had to go to his parents to find the harness. that was 3 weeks ago, i have not herd from him since, so now my pickle. i need a harness and ecu for a notch top. from what i have been reading, there are 2 different s14 ecus. how do i tell which one i am looking for? also, how different is an s13 harness. they are considerably cheaper, and im not afraid of wiring, but if they are not even close, that theory is out the window. all help is greatly appreciated.

matt

[Sileighty_85]

Look at the Valve cover bolts

Zenki's/Chuki's use close ended nut
Kouki's Use 10mm bolts

Not sure how to tell from Zenki and Chuki though, I dont think it matters though

If your still unsure post up your engine

[garagelu]

You could actually use a s13 wiring harness on a s14 engine. You just can't use the vtc. You will have to extend some wires a tad. Mostly the ones by the intake manifold. Oh and you would need a s13 ecu of course.

I have a s14 sr WC ecu with the full s14 wiring harness to go with it. If you want it, PM me.