Blackzenkis Black Zenki FOR SALE!!!!

[Blackzenki82]

http://i30.photobucket.com/albums/c336/gainesville_guy2001/badass4.jpg

Miles: 176ch 60eng

Price: $9,500

Title Status: clean

Location: Gainesville FL

Contact: AIM=Blackzenki82

-----------------------------------------------------
Vehicle Description:

everyone know's it... everyone's seen it, it is now FOR SALE...

$9.5K OBO, and no fucking trades, i don't want your honda, or your moms corsica....... trying to buy another car with the $$$

your choice of wheels...

Rota P45R 18.9.5 +30's (extended RLCA so around +15, with 15mm spacer up from with H&R extended studs, so +15 front as well)

or

CST Zero-1 17x9.5 +15

WORKING AC, PS, HEAT, AND CRUISE CONTROL!!!!!!!!!!! yeah, in a SR swap... i don't fuck around...

1996 240SX SE w/MINT and i do mean MINT interior
KAAZ 2way LSD
JDM APEXi 3"-3.5" N1 (one piece, purple, and JASMA stamp)
APEXi 3" Down Pipe
Megan Turbo elbow
SSAC Stainless manifold
Nardi Taniguchi wheel
NRG short hub
NRG quick release
NRG large oil catch can (yet to have a drop of oil in it)
custom built Pulsar GTIR T28 (custom specs on request) full spool around 3k, holds till red line
Deatchwerks 550cc side feeds
Walboro 255
Z32 MAF
Z32 Fuel filter
Z32 30mm aluminum brakes F/R w/working ebrake (well, soon to come....)
Slotted 30mm rotors
APEX stainles steel Z32/240SX conversion lines
ACT 6 puck unsprung clutch
B&M short throw shifter V2
Kai Project 1 pc stainless steel clutch line
Touge Factory Stainless Steel high pressure power steering line
Water pump, Alternator, and PS pump bare aluminum pulleys
Nistune Real Time Tuning "standalone" ECU, comes with data/consult cable. Dyno Tuned by Martin @ Z Fever
Innovate LC-1 wideband w/DB gauge wired into Nistune for data logging
GReddy Profec B Spec 2 Electronic Boost Controller "Hi" 11.5lbs "Lo" 16.5lbs
GReddy Full Auto Timer
GReddy Rocker Arm Stoppers
GReddy GREX oil filter relocation kit
GReddy GREX white shift knob (never gets hot!! +1.1million!!)
GReddy oil filter (less than 100 miles on it so far)
GReddy FMIC piping
GReddy Suction Kit
GReddy/Trust AIRNIX filter
GReddy Type S BOV
GReddy radiator cap
GReddy Gauge Pod for Innovate LC-1
FReddy SR oil pan
4" HUGE FMIC
Rota P45R 18x9.5 +30 (12mm spacers up front, extended adjustable hubs in rear)
Riken Raptor 225/40/ZR18's with 80% rubber
H&R Extended studs up front
Gorilla lugs with key
Autometer Cobalt boost gauge
Autometer Cobalt Oil PSI gauge
Autometer Cobalt Water Temp gauge
ebay rear C-pillar bar
JDM OEM S13/S14 front strut bar (super fucking rare!!!!)
Pioneer DEH-6800 CD/MP3 deck
Rockford Fosgate 6.5 coaxials in the doors
Kenwood 6.5 in coaxials in the deck
Optima Red Top battery
Megan Street Coil overs w/under 3k miles
NO SPOILER!!!
6k HIDS
Kouki Tails
JDM "Silvia" grille
OEM "Silvia" trunk emblem in flat black
S14 fogs, yeah still there after FMIC.... baller
Genuine Nismo Oil cap
Genuine Nismo License plate cover
Genuine Nismo Thermostat
KOYO Radiator **NEW**
OEM Nissan clutch fan still installed
OEM S14 SR20DET fan shroud (awesome cooling, never runs hot)
New Nissan Turbo flange gasket
New Nissan lower shift boot
New Nissan Exhast manifold gasket
New Nissan steering rack boots
Circuit sports inner/outer tie rods
Rear lower control arms
Rear upper control arms
Rear toe rods
Rear traction rods
Rear 28.5mm sway bar
Front tension rods
Front lower control arm
Front 30.5mm sway bar
Solid sway bar bushings

------------------------------------------------------
Additional Photos:

http://i30.photobucket.com/albums/c336/gainesville_guy2001/badass5.jpg

http://i30.photobucket.com/albums/c336/gainesville_guy2001/badass9.jpg

http://i30.photobucket.com/albums/c336/gainesville_guy2001/DSCF0173-5.jpg

http://c2.ac-images.myspacecdn.com/images02/92/l_24fe828763454382ae5e9ec6e00781ed.jpg

http://c3.ac-images.myspacecdn.com/images02/110/l_6a14ca42247f480dbcaf6dd61a230b8a.jpg

http://c1.ac-images.myspacecdn.com/images02/86/l_ce7f3d51c43c4bc99ef0be2ab418d444.jpg

------------------------------------------------------

i know Zilvia is predominantly Cali, so i can work on shipping if buyer pays...

[PrincessPeach]

WORKING AC, PS, HEAT, AND CRUISE CONTROLhttp://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif (http://zilvia.net/f/cars-sale/278994-blackzenkis-black-zenki-sale.html#)!!!!!!!!!!! yeah, in a SR swap... i don't fuck around...

lmao! i love it. GLWS!

[Blackzenki82]

it's been done a lot before, but not VERY often...

[bewst pewp]

stupid question but does it pass emmissions?

[Blackzenki82]

i wouldn't think so... test pipe, no EGR stuff... i live in florida and we don't have emissions down here, so i've never had to worry about it...

[Jordan249]

I usually can't stand Zenki's but this one even makes my pants tight! Bump for you man.

[+Waldo+]

shits weak























bump for marshal ;P

[hohen]

helllllllllllllllllaaaa freeeeeshhhhhh

[S14_Kouki]

+waldo+
only 127 post zilvia should be home to you.

Yo OP Iv kinda watched your build on TR idk man 9.5, on the talkin shit side you will never get 9.5 for that car at the most I see 7k

JASMA stamp everyone has a apex exhaust not that rare man and nothing special about a JASMA stamp.
SSAC Stainless manifold = suck suck ass company
Stainless Steel high pressure power steering line the only reason I kinda see you needing this is if you bust a PS line putting the engine in. But if you can put in a engine right no need for a SSHPPS
Why is your LOW boost higher then your HI boost??
autometer = fail
Megan Street Coil overs = fail


All Knock off parts suspension
Rear lower control arms
Rear upper control arms
Rear toe rods
Rear traction rods
Rear 28.5mm sway bar
Front tension rods
Front lower control arm
Front 30.5mm sway bar

So after all this. I had to say it. but GL with sale man

[Blackzenki82]

seriously bro... what is your problem?

you flamed on TR, and now here, with the same old "cheap shit" parts...

nothing i have is listed as being more than what it is...

go find another thread to fuck around in, Jesus you're annoying... or just go find the other forums i;ve posted this FS ad on and copy and paste the same thing...

serisously, what the hell is your problem anyways? don't like the car, don't post, simple as that...

[Jordan249]

seriously bro... what is your problem?

you flamed on TR, and now here, with the same old "cheap shit" parts...

nothing i have is listed as being more than what it is...

go find another thread to fuck around in, Jesus you're annoying... or just go find the other forums i;ve posted this FS ad on and copy and paste the same thing...

serisously, what the hell is your problem anyways? don't like the car, don't post, simple as that...

+1 man. GLWS :coold:

[Blackzenki82]

there's a guy selling a S14 with Tein coils, slammed with a different color kouki front for 6k .... and it's a bone stock KA with busted AC..

and my car is only worth 7K??? 340hp SR swap, working AC, heat, PS, and cruise control, daily driveable, reliable, full suspension (although cheap), 2 way LSD, shit ton of bolt ons, injecotrs, MAF standalone ECU, custom built turbo, $400 CD player, complete MINT INTERIOR, mint exterior, and a gang of other shit...


i didn't know all that stuff was only worth $1k...

my bad...

[awesomenick]

I like the car.

I would drive this.

GLWS.

[Jordan249]

I think the flammer might be actually be a flammer after you haha

[E2EKIELR34]

damnn love your car man, very clean for a good price. legit seller yo and awesome guy to the max!

[Blackzenki82]

he follows me around enough... all up on my nuts... like he has nothing better to do with his life than track down my FS threads on different forums and say "Megan coils fail"

....retards...

[S14_Kouki]

seriously bro... what is your problem?

you flamed on TR, and now here, with the same old "cheap shit" parts...

nothing i have is listed as being more than what it is...

go find another thread to fuck around in, Jesus you're annoying... or just go find the other forums i;ve posted this FS ad on and copy and paste the same thing...

serisously, what the hell is your problem anyways? don't like the car, don't post, simple as that...

LMAO really because this is a different person then who is on tr. You should chill with the guy that wants 50k for his s15. I have no prob with your car its clean good work just not worth 9.5

[240sxfamily]

I have watched this car go from unmolested automatic clean zenki to beautiful sr fully built awesometown car.

sad to see this go, but for a rhd silva, not worth it to me marshal, with the amount of work you have in this car, there are NO cut corners or anything on this car, and thats what makes it what it is.

[sean1186]

one helluva a build sir, glws

[memphis350z]

damn i love this car...glws

[Bushido]

if for some reason you decide to part it...

LET ME KNOW!

[Blackzenki82]

thanks guys!!

car absolutely will not be getting parted out...

[Blackzenki82]

TTT?

msg lgnth

[slim_240]

why are you selling the beasT??? i was enjoying your build thread.

glws

[Blackzenki82]

to get a real Silvia... there's a few in canada i can lock down for under $8K and use the rest getting it to Florida and "legal"

[Not You]

Oh shit dawg, it's that 20k eBay car.
Price fail.

[freddie07]

Is this the Gold one that you is one your build thread? I'm actually looking for a project/weekend car to mess with.

[Blackzenki82]

Oh shit dawg, it's that 20k eBay car.
Price fail.

oh god.... some dipshit from TR bringing the bull shit over here... don't you have anything better to do?


freddie, no it's not... that car was stipped and sold as a rolling shell...

[freddie07]

oh ok, sorry I'm new here so I didn't know. Thank you for the fast respond.

[freddie07]

I need to get some things together over and hopefully you'll hear from me soon.

[freddie07]

Do you have any vids of the car at idle or drive bys or anything?

[Blackzenki82]

unfortnatly no... all i have is a shitty vid from my last drift event... the ONLY one this car has been in...

[JDM Sil4ty]

ive followed the build, he put his time n effort into this machine ..
but certainly not worth 9.5k imo .. but glws .

[stunnaben]

Trade for a 1997 slammed wheels comes with turbo setup? Minty fresh interior? Red :D

http://zilvia.net/f/cars-sale/277348-ft-fs-s14-kouki-1997-96000-miles.html

[Blackzenki82]

Trade for a 1997 slammed wheels comes with turbo setup? Minty fresh interior? Red :D

http://zilvia.net/f/cars-sale/277348-ft-fs-s14-kouki-1997-96000-miles.html
bro, that car is cleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeen...

BUT...

A. i don't really like koukis (but i'd drive the piss out of yours tho!)
B. I'm trying to sell the car to get a Zenki Silvia

thanks anyways tho!! god the thing is nice, good luck with it!

[freddie07]

So cam we see that drift video. I just want to hear the car and see how it drives

[Blackzenki82]

So cam we see that drift video. I just want to hear the car and see how it drives

here's the drift vid

YouTube - DeSotoDrfit (http://www.youtube.com/watch?v=e9cURRgOFaE&feature=channel)


and here's one from when i first installed the motor, it's in a different chassis, and basically bone stock, with you common entry level bolt ons... but you get to hear it or whatever... i don't have anything current...

YouTube - Daily driven (http://www.youtube.com/watch?v=Z0ujGBFwOGE&feature=player_profilepage#t=183)

i can have a shit ton of people vouch for this car, and it current running condition if need be... it runs like a top, no knocks, studders, ticks, tacks, whines, nothing... idles smooth and steady with no variation.... Martin @ Zever (tuner) said it was one of the healthiest, well set up motors he's seen, and that's saying alot, as people hand him and open check and say "build my car"... so he's used to SRs, RBs, VG,s etc that are making well over 500-600whp

[freddie07]

Wow sounds clean. Good job on the build. How much are you making currently at the wheels?

[Blackzenki82]

not really too too sure right now... prob arund 290-295?

will find out saturday when i finalize the tune..shooting for around 340ish

[97nismo]

i like it you should keep and get some aero, forget the silvia this is way nicer.

[Blackzenki82]

sale pending @ $9,350 .... $2,000 deposit made


if it falls through, which i don't think it will, i'm getting OEM black Navan sides and valences... then selling the SR and going RB or 2JZ..

[PSI240SX]

I really can't believe these guys saying the car is not worth it. What's great is a deposit had been made, and it will be sold. Enjoy your crow haters.

[Blackzenki82]

^^^
same thing i've been saying.... F the haters.... everyone with thier ZOMGTOYLLNEVERGET9K+!!!!! and here it is selling for $9,350..

people hate when they can't afford shit, or when their S13's are flat black sitting on +40 16" wheels...

[Blackzenki82]

woops... wrong post!

[monsta_civic]

LMAO really because this is a different person then who is on tr. You should chill with the guy that wants 50k for his s15. I have no prob with your car its clean good work just not worth 9.5

+1 here I have my s14.5 with built s14 sr20 with t28 with tonz of money into it, mint interior and only 80k on chassis, im asking 7500.00 just thought i would add! you have a clean car, but a zenki isnt worth that much:squint:

[winter]

a nice florida car, i did not think it was possible. glws.

[Propaganda]

I still say you're an idiot for getting a stock Silvia..

So what's the update?

[Blackzenki82]

LOL, thanks...

update is sale pending... guys either flying in on sunday, or will fly in next weekend and drive it home...

closer it get's to crunch time, the more i don't want to get rid of it and i'm considering returning his deposite and telling him n/m...

[97nismo]

keep it, there are not that many clean s14's out there i know that for a fact.

[WangonwWarrior]

+waldo+
only 127 post zilvia should be home to you.

Yo OP Iv kinda watched your build on TR idk man 9.5, on the talkin shit side you will never get 9.5 for that car at the most I see 7k

JASMA stamp everyone has a apex exhaust not that rare man and nothing special about a JASMA stamp.
SSAC Stainless manifold = suck suck ass company
Stainless Steel high pressure power steering line the only reason I kinda see you needing this is if you bust a PS line putting the engine in. But if you can put in a engine right no need for a SSHPPS
Why is your LOW boost higher then your HI boost??
autometer = fail
Megan Street Coil overs = fail


All Knock off parts suspension
Rear lower control arms
Rear upper control arms
Rear toe rods
Rear traction rods
Rear 28.5mm sway bar
Front tension rods
Front lower control arm
Front 30.5mm sway bar

So after all this. I had to say it. but GL with sale man

I could flame you so hard right now but your just a stupid wannabe so im not gonna waste my time. You make no sense, get back on your knees and open that mouth :newbie:

[WangonwWarrior]

+1 here I have my s14.5 with built s14 sr20 with t28 with tonz of money into it, mint interior and only 80k on chassis, im asking 7500.00 just thought i would add! you have a clean car, but a zenki isnt worth that much:squint:


I kno more ppl that like zenkis more than koukis. And your username has civic in here.




Blackzenki, i have not seen a car this clean with EVERYTHING working in a long time. Ive seen some not as clean go for 11k plus all day so dont sweat it

[Blackzenki82]

i had a cash offer for 9K, and another person put a deposite down on $9,350...

low and behold, i returned the deposite and i've decided to keep the car for various reasons...

so all those that said my car wasn't worth shit, fuck you, die in a fire... just cause you want it, and can't afford even the price you say it's worth, no need to talk shit...

[S14_Kouki]

I could flame you so hard right now but your just a stupid wannabe so im not gonna waste my time. You make no sense, get back on your knees and open that mouth :newbie:

Really you could flame Me??? Then's whats stopping you?? I want you to try and flame me. How the fuck am I a newbie if iv been on here since 05 and I bought my first zenkie in 01??? You sir need to put blackzenkie's nuts in your mouth.

i had a cash offer for 9K, and another person put a deposite down on $9,350...

low and behold, i returned the deposite and i've decided to keep the car for various reasons...

so all those that said my car wasn't worth shit, fuck you, die in a fire... just cause you want it, and can't afford even the price you say it's worth, no need to talk shit...

Well seeing how the car has not went thur then thats proof its not worth 9k ppl have found cleaner cars to spend that much money on.

[Fish805]

loved watching you build this in the forums cant wait to see the next project.

[Persona]

OP get this thread closed since your keeping it.

[DOHCsky]

ebay parts are fine.
My car was built with e-bay parts and it was a fucking trooper.


but dood, noway it will make 340 on an s15 turbo. Sorry dood, no way.


but other than that, your car is actually somewhat enjoyable.

and yes, koukis are for people that dont have enough class to pull of a zenki.

-HKpat

[S14_Kouki]

ebay parts are fine.
My car was built with e-bay parts and it was a fucking trooper.


but dood, noway it will make 340 on an s15 turbo. Sorry dood, no way.


but other than that, your car is actually somewhat enjoyable.

and yes, koukis are for people that dont have enough class to pull of a zenki.

-HKpat

NO ebay parts are fucking WEAK and stupid and whatever piece of shit word comes in your head. Main reason is they put the real companys out of business cause no one wants to spend the little extra money to get the real thing. and blackzenki says he has a "gti-r" turbo BTW have u dynoed it yet to prove making that much power??

[Fish805]

why are you guys all being haterz? he built his car unlike most. Who cares what website sells it. Ebay also has greddy and aem parts does that make those companys suck? Some people are so caught up in brands its rediculous. You dont always have to pay top dollar to get good parts. Yes some new companys or out of country companys make poopy parts for cheap but some are also effective. either or it took his knowledge of the car to build and do swaps so give this guy the respect he deserves.

[S14_Kouki]

why are you guys all being haterz? he built his car unlike most. Who cares what website sells it. Ebay also has greddy and aem parts does that make those companys suck? Some people are so caught up in brands its rediculous. You dont always have to pay top dollar to get good parts. Yes some new companys or out of country companys make poopy parts for cheap but some are also effective. either or it took his knowledge of the car to build and do swaps so give this guy the respect he deserves.

How the fuck did he build his car unlike others its a black s14 with a sr and rotas thats the same as 90% of s14. I never said selling a part on a certain website makes them bad. Its selling cheap knock off parts is what makes them suck. Simple thing take notes. If you are building a car and you want respect then use good name brand parts and if your going to sell a 240 for 9k USE GOOD NAME BRAND PARTS.

[S14Driftr91]

This car is dope as f*ckkk. If your happy with the car, thats all that should matter. gotta love them haters man :gives: GLWS !

[chentes14]

damn too many haters on this thread, s14 kouki ur a dum ass why u hating on other peoples thread just leave it alone go live ur life or something man intead of just talking shit on here... "pointless"!

[S14_Kouki]

damn too many haters on this thread, s14 kouki ur a dum ass why u hating on other peoples thread just leave it alone go live ur life or something man intead of just talking shit on here... "pointless"!

Talking shit is my life.

Points being proven here:

Cars clean just not worth 9k

And NOBODY every should buy/use knock off parts.

[Blackzenki82]

Well seeing how the car has not went thur then thats proof its not worth 9k ppl have found cleaner cars to spend that much money on.

you're a retard, did you not see that i had a CASH OFFER!!!! not to mention, someone already had given me $2500 deposit on it and was going to fly in, pay me the difference to a total cost of $9,350, and drive it home... i returned the $2500 and said "sorry bro, i can't let it go"

you sir, lack reading comprehension.... fucking IDIOT...

ebay parts are fine.
My car was built with e-bay parts and it was a fucking trooper.


but dood, noway it will make 340 on an s15 turbo. Sorry dood, no way.


but other than that, your car is actually somewhat enjoyable.

and yes, koukis are for people that dont have enough class to pull of a zenki.

-HKpat

wow, you gave me a SHITTON of shit back on FD and stuff... thanks for posting something nice..

the turbo's not a s15, it's a custom built GTIR T28 that made 260whp on 7PSI with an exhaust leak at the flange... made that much power @ 7lbs, leaking out of hole this big
http://i30.photobucket.com/albums/c336/gainesville_guy2001/DSCF0176-2.jpg

as a side note for others, HKpat flamed the fuck out of me, and we've got bad blood, and i don't think he'd vouch for me, but here his is... vouching... take note of that...

NO ebay parts are fucking WEAK and stupid and whatever piece of shit word comes in your head. Main reason is they put the real companys out of business cause no one wants to spend the little extra money to get the real thing. and blackzenki says he has a "gti-r" turbo BTW have u dynoed it yet to prove making that much power??

have you ever used eBay parts? or are you just going off the fanboy brand whore like everyone else? have you ever put ebay suspension to the test, or did you just read about it...

i love people who have "real world" opinions with things they just read about.....

as for the dyno numbers, see above fuck face...
http://c1.ac-images.myspacecdn.com/images02/77/l_35233e5169d348388ed8b94b9661e5fc.jpg
Martin @ Z fever in Tampa FL
http://c4.ac-images.myspacecdn.com/images02/103/l_3fc8359b4c2b416c8f05db0ed6e359e7.jpg

as for everyone else who's bumped, complimented, and defended my car, thanks, S14_kouki is pretty much a dumb ass... and well, i don't think with everyone's posts in regards to my car, i have anything to defend, and he's yelling into the air at himself...






and can i go ahead and get a mod to lock this thread? or delete, or whatever you guys do to end things on this forum...

[lolatclint]

yo bro i like ur jdm ride man but i can get a lambo for 9k

[S14_Kouki]

you're a retard, did you not see that i had a CASH OFFER!!!! not to mention, someone already had given me $2500 deposit on it and was going to fly in, pay me the difference to a total cost of $9,350, and drive it home... i returned the $2500 and said "sorry bro, i can't let it go"

you sir, lack reading comprehension.... fucking IDIOT...




have you ever used eBay parts? or are you just going off the fanboy brand whore like everyone else? have you ever put ebay suspension to the test, or did you just read about it...

i love people who have "real world" opinions with things they just read about.....



As for dyno numbers it made 260 ok...... thats not 340. Just because you get a cash offer does not mean he was going to give you the money. Did you have the money sitting in your hand???? And NO I have never hard cheap ass parts theres a reason I would rather invest my money into quality made parts. And I will never let cheap ass parts get near my car I dont need real world experience to tell me something is cheap and sucks ass.

[Blackzenki82]

As for dyno numbers it made 260 ok...... thats not 340. Just because you get a cash offer does not mean he was going to give you the money. Did you have the money sitting in your hand????

if you can't get 80whp gain with 11psi over stock, you're doing it wrong, especially with a custom T28/T3 hybrid turbo with oversized wheels, upgraded internals, and built to support 24+psi..... EFFICIENTLY

you idiot... someone DID give me money, but i gave it BACK!!! jesus, i hope you're not as retarded at life as you are the internet


And NO I have never hard cheap ass parts theres a reason I would rather invest my money into quality made parts. And I will never let cheap ass parts get near my car I dont need real world experience to tell me something is cheap and sucks ass.

so why then, with as you say, you don't need real world experience, we should take your opinion on ANYTHING...

Me? i like to learn, have things in my hand, use them, make up my own mind off of things, instead of working on the opinions of people who have no idea what the fuck they're doing....

I dont need real world experience

i REALLY hope you don't say that at job interviews, or on your college applications....

[Mr.350Gt]

clean 240 bro,glws