Dr. Moreau
09-14-2009, 11:34 AM
here's the run down on the build:
S14 SR20DET (Zenki)
Block cleaned, new freezeplugs, line honed,
Motor bored .020 over with CP 9:1 pistons
Stock rods
Rebuilt head, seals, valve guides, clean!
Stock cams
Greddy intake mani (real)
Greddy oil pan
ARP head bolts, main, and rod bolts
Apex 1.1 HG
OEM nissan bearings
Fresh rebuild, 90% assembled (basically head has been bolted to the block & oil pump installed, but none of the accessories installed and timing chain needs to be rehung since i sold the cams.)
No ecu, but i got a harness from brian w. a while back that is wired for s13 chassis w/o a mafs.
NO TURBO, NO MANIFOLD, NO INJECTORS, NO TRANNY
sometime this weekend i'll get a chance to double-check what accessories i do and don't have for it, but if memory serves it's missing the water pump, p/s pump, flywheel, and clutch assy. and i may or may not have a starter for it. pretty sure i have all/most of the necessary paper gaskets.
this is the sr s13koop had rebuilt last year before getting his chaser. i've been keeping it wrapped up in storage since last summer.
i'll sell the whole setup for $3000 obo. buyer pays shipping
OR
I'm also willing to part it out (i can detach the head from the block, but no pulling pistons, etc.). HG will be sold with the block if parted out.
rice run down on individual parts:
oem rebuilt head: $700 obo
rebuilt block w/ apexi 1.1mm hg: $SOLD!
greddy oil pan: $375 obo
greddy intake manifold: $625 obo
s14 sr valve cover painted flat gray: $150 obo
S14 sr spark plug cover: $50 obo
wiring harness: $SOLD
pricing and shipping are negotiable!
i'll be shipping from zip code 70003 so yall can calculate shipping. i'd also be willing to deliver motor/heavy parts as far as 200-250 miles in any direction from new orleans in exchange for a tank of gas to get me back home.
im not on here very much anymore due to working so much and craptop's network card dying, so the best way to contact me is by email: [email protected]
i'll keep the thread updated if anything sells.
like i said i really need it gone soon. i had a local buyer for this setup but he's been taking waaaaaay too long to come up with the money. can't wait on him anymore. this is a perfect buy for anyone that recently popped a motor.
pic from when i picked it up:
http://i67.photobucket.com/albums/h290/s13koop/DSC08292.jpg
S14 SR20DET (Zenki)
Block cleaned, new freezeplugs, line honed,
Motor bored .020 over with CP 9:1 pistons
Stock rods
Rebuilt head, seals, valve guides, clean!
Stock cams
Greddy intake mani (real)
Greddy oil pan
ARP head bolts, main, and rod bolts
Apex 1.1 HG
OEM nissan bearings
Fresh rebuild, 90% assembled (basically head has been bolted to the block & oil pump installed, but none of the accessories installed and timing chain needs to be rehung since i sold the cams.)
No ecu, but i got a harness from brian w. a while back that is wired for s13 chassis w/o a mafs.
NO TURBO, NO MANIFOLD, NO INJECTORS, NO TRANNY
sometime this weekend i'll get a chance to double-check what accessories i do and don't have for it, but if memory serves it's missing the water pump, p/s pump, flywheel, and clutch assy. and i may or may not have a starter for it. pretty sure i have all/most of the necessary paper gaskets.
this is the sr s13koop had rebuilt last year before getting his chaser. i've been keeping it wrapped up in storage since last summer.
i'll sell the whole setup for $3000 obo. buyer pays shipping
OR
I'm also willing to part it out (i can detach the head from the block, but no pulling pistons, etc.). HG will be sold with the block if parted out.
rice run down on individual parts:
oem rebuilt head: $700 obo
rebuilt block w/ apexi 1.1mm hg: $SOLD!
greddy oil pan: $375 obo
greddy intake manifold: $625 obo
s14 sr valve cover painted flat gray: $150 obo
S14 sr spark plug cover: $50 obo
wiring harness: $SOLD
pricing and shipping are negotiable!
i'll be shipping from zip code 70003 so yall can calculate shipping. i'd also be willing to deliver motor/heavy parts as far as 200-250 miles in any direction from new orleans in exchange for a tank of gas to get me back home.
im not on here very much anymore due to working so much and craptop's network card dying, so the best way to contact me is by email: [email protected]
i'll keep the thread updated if anything sells.
like i said i really need it gone soon. i had a local buyer for this setup but he's been taking waaaaaay too long to come up with the money. can't wait on him anymore. this is a perfect buy for anyone that recently popped a motor.
pic from when i picked it up:
http://i67.photobucket.com/albums/h290/s13koop/DSC08292.jpg