Clawhammer
09-12-2009, 05:30 PM
Most parts were bought BNIB, have receipts for everything FWIW.
Located in Gainesville. Can make arrangements to meet or travel down south. Not making any special trips for one part, I might make a day of it if I have a bunch of stuff to sell. Will ship at your expense (+paypal fee). Reasonable offers welcome
No trades, I don't want your junk...well maybe a 360
Email: ryanfncrowson at gmail dot com
Motor:
We rebuilt the motor, so all new gaskets seals etc. Motor will need to be broken in! Small leak at the oil feed, before it's dropped in take it to a welder and give em 20 bucks to hit it with a fresh bead. Or JB weld it. (There's a -3AN fitting welded to the block that eliminates the banjo and crush washer system.) The new stuff have 0 miles on them. Almost everything else has <5000 miles.
Long block $1500
Valve cover to the oil pan. Will have flywheel, Greddy RAS, HKS step one cams, Apexi HG, ARP headstuds, Nismo tstat etc. Will not have accessories, exhaust manifold/turbo, fuel rail or injectors, or clutch.
http://c2.ac-images.myspacecdn.com/images02/109/l_3be9f11d626f4516987ebcd3d04c4099.jpg
http://c3.ac-images.myspacecdn.com/images02/78/l_b654036c88874a1c95427bc55374fb8e.jpg
http://c3.ac-images.myspacecdn.com/images02/73/l_2192dc3bc06140aeab0ea3a26ec36f9e.jpg
If you want to add things to it you can choose from (or if you already have an SR):
S15 Spec R turbo package $750
Turbo (<5000 miles, NO shaft play, no smoke)
Stainless steel braided lines
Tubular manifold and copper exhaust manifold gasket
All new turbo gaskets
http://www.btyproductions.com/clawhammer/240/FS/turbo1.JPG
http://www.btyproductions.com/clawhammer/240/FS/turbo2.JPG
Greddy Hotpipe w/ HKS BOV $175 (with Recirc fitting)
http://www.btyproductions.com/clawhammer/240/FS/bov.JPG
SR Alternator $150 (Brand new remanufactured KA alternator ready to bolt to an SR)
http://www.btyproductions.com/clawhammer/240/FS/sralt.JPG
http://c4.ac-images.myspacecdn.com/images02/70/l_980d82c544d74006af7b3dd088060c53.jpg
Footwork stuffs:
Coils $1000 + your crap you'd throw away anyway
Stance GR+ Pro, <5000 miles on them, 8/6 springs loaded, 9/7 BNIB, wrenches, z32 lower mounts, z32 uprights, extra set of brand new camber plates.
http://www.btyproductions.com/clawhammer/240/FS/footwork.JPG
http://c2.ac-images.myspacecdn.com/images02/7/l_e67a88c735804e51997835d4419f368d.jpg
Greddy Boost Gauge $150
Buy both get the pod free!
Greddy Oil Pressure Gauge $150
http://c2.ac-images.myspacecdn.com/images02/34/l_ee120153277a4e2a882ad79e2de98d2d.jpg
Complete SR Head $200
http://www.btyproductions.com/clawhammer/240/FS/sparehead.JPG
S14 Front Seats $150
http://www.btyproductions.com/clawhammer/240/FS/seat1.JPG
http://www.btyproductions.com/clawhammer/240/FS/seat2.JPG
Redline Goods Shift Boot $25 (Italian leather, red stitching)
http://www.btyproductions.com/clawhammer/240/FS/knobandboot.JPG
Nismo Motor and Tranny Mounts $170 installed never used. New untorn exhaust bracket on tranny mount too!
http://www.btyproductions.com/clawhammer/240/FS/mounts.JPG
http://www.btyproductions.com/clawhammer/240/FS/mounts1.JPG
http://www.btyproductions.com/clawhammer/240/FS/mounts2.JPG
http://www.btyproductions.com/clawhammer/240/FS/mounts3.JPG
Speed Panels with hardware $40
http://www.btyproductions.com/clawhammer/240/FS/speedpanels.JPG
Chuki bumper $20 needs to be sanded
http://www.btyproductions.com/clawhammer/240/FS/redchuki1.JPG
http://www.btyproductions.com/clawhammer/240/FS/redchuki2.JPG
http://www.btyproductions.com/clawhammer/240/FS/redchuki3.JPG
Chuki bumper grills $10
http://www.btyproductions.com/clawhammer/240/FS/chukigrills.JPG
SOHC Alternator $25
http://www.btyproductions.com/clawhammer/240/FS/alt1.JPG
http://www.btyproductions.com/clawhammer/240/FS/alt2.JPG
SOHC Dizzy and sweet OEM rubber cover $25
http://www.btyproductions.com/clawhammer/240/FS/dizzy.JPG
Random filter $20 could use a cleaning
T25 Turbo Outlet $20
http://www.btyproductions.com/clawhammer/240/FS/turbo%20stuff.JPG
^inlet sold
S13 Padded Cup Holder Console Lid! $50
http://www.btyproductions.com/clawhammer/240/interior/cupholder1.JPG
http://www.btyproductions.com/clawhammer/240/interior/cupholder2.JPG
Single DIN Triple Gauge Plate $10
http://www.btyproductions.com/clawhammer/240/FS/gaugeplate.JPG
SOHC/SR MAFS $20 w/pigtail
http://www.btyproductions.com/clawhammer/240/FS/srmaf.JPG
Located in Gainesville. Can make arrangements to meet or travel down south. Not making any special trips for one part, I might make a day of it if I have a bunch of stuff to sell. Will ship at your expense (+paypal fee). Reasonable offers welcome
No trades, I don't want your junk...well maybe a 360
Email: ryanfncrowson at gmail dot com
Motor:
We rebuilt the motor, so all new gaskets seals etc. Motor will need to be broken in! Small leak at the oil feed, before it's dropped in take it to a welder and give em 20 bucks to hit it with a fresh bead. Or JB weld it. (There's a -3AN fitting welded to the block that eliminates the banjo and crush washer system.) The new stuff have 0 miles on them. Almost everything else has <5000 miles.
Long block $1500
Valve cover to the oil pan. Will have flywheel, Greddy RAS, HKS step one cams, Apexi HG, ARP headstuds, Nismo tstat etc. Will not have accessories, exhaust manifold/turbo, fuel rail or injectors, or clutch.
http://c2.ac-images.myspacecdn.com/images02/109/l_3be9f11d626f4516987ebcd3d04c4099.jpg
http://c3.ac-images.myspacecdn.com/images02/78/l_b654036c88874a1c95427bc55374fb8e.jpg
http://c3.ac-images.myspacecdn.com/images02/73/l_2192dc3bc06140aeab0ea3a26ec36f9e.jpg
If you want to add things to it you can choose from (or if you already have an SR):
S15 Spec R turbo package $750
Turbo (<5000 miles, NO shaft play, no smoke)
Stainless steel braided lines
Tubular manifold and copper exhaust manifold gasket
All new turbo gaskets
http://www.btyproductions.com/clawhammer/240/FS/turbo1.JPG
http://www.btyproductions.com/clawhammer/240/FS/turbo2.JPG
Greddy Hotpipe w/ HKS BOV $175 (with Recirc fitting)
http://www.btyproductions.com/clawhammer/240/FS/bov.JPG
SR Alternator $150 (Brand new remanufactured KA alternator ready to bolt to an SR)
http://www.btyproductions.com/clawhammer/240/FS/sralt.JPG
http://c4.ac-images.myspacecdn.com/images02/70/l_980d82c544d74006af7b3dd088060c53.jpg
Footwork stuffs:
Coils $1000 + your crap you'd throw away anyway
Stance GR+ Pro, <5000 miles on them, 8/6 springs loaded, 9/7 BNIB, wrenches, z32 lower mounts, z32 uprights, extra set of brand new camber plates.
http://www.btyproductions.com/clawhammer/240/FS/footwork.JPG
http://c2.ac-images.myspacecdn.com/images02/7/l_e67a88c735804e51997835d4419f368d.jpg
Greddy Boost Gauge $150
Buy both get the pod free!
Greddy Oil Pressure Gauge $150
http://c2.ac-images.myspacecdn.com/images02/34/l_ee120153277a4e2a882ad79e2de98d2d.jpg
Complete SR Head $200
http://www.btyproductions.com/clawhammer/240/FS/sparehead.JPG
S14 Front Seats $150
http://www.btyproductions.com/clawhammer/240/FS/seat1.JPG
http://www.btyproductions.com/clawhammer/240/FS/seat2.JPG
Redline Goods Shift Boot $25 (Italian leather, red stitching)
http://www.btyproductions.com/clawhammer/240/FS/knobandboot.JPG
Nismo Motor and Tranny Mounts $170 installed never used. New untorn exhaust bracket on tranny mount too!
http://www.btyproductions.com/clawhammer/240/FS/mounts.JPG
http://www.btyproductions.com/clawhammer/240/FS/mounts1.JPG
http://www.btyproductions.com/clawhammer/240/FS/mounts2.JPG
http://www.btyproductions.com/clawhammer/240/FS/mounts3.JPG
Speed Panels with hardware $40
http://www.btyproductions.com/clawhammer/240/FS/speedpanels.JPG
Chuki bumper $20 needs to be sanded
http://www.btyproductions.com/clawhammer/240/FS/redchuki1.JPG
http://www.btyproductions.com/clawhammer/240/FS/redchuki2.JPG
http://www.btyproductions.com/clawhammer/240/FS/redchuki3.JPG
Chuki bumper grills $10
http://www.btyproductions.com/clawhammer/240/FS/chukigrills.JPG
SOHC Alternator $25
http://www.btyproductions.com/clawhammer/240/FS/alt1.JPG
http://www.btyproductions.com/clawhammer/240/FS/alt2.JPG
SOHC Dizzy and sweet OEM rubber cover $25
http://www.btyproductions.com/clawhammer/240/FS/dizzy.JPG
Random filter $20 could use a cleaning
T25 Turbo Outlet $20
http://www.btyproductions.com/clawhammer/240/FS/turbo%20stuff.JPG
^inlet sold
S13 Padded Cup Holder Console Lid! $50
http://www.btyproductions.com/clawhammer/240/interior/cupholder1.JPG
http://www.btyproductions.com/clawhammer/240/interior/cupholder2.JPG
Single DIN Triple Gauge Plate $10
http://www.btyproductions.com/clawhammer/240/FS/gaugeplate.JPG
SOHC/SR MAFS $20 w/pigtail
http://www.btyproductions.com/clawhammer/240/FS/srmaf.JPG