ka24 manual swap

[Renelovesnike]

well i just put my s14 manual trany in but the 5spd cross member is bent to shit!! will my auto cross member work???

also my s14 manual tranny did not come with the sensor asembly right under the shifter on the passenger side!

i have an s13 manual tranny and my old auto tranny, but the auto sensor was a lil bigger to fit in the s14 tranny hole, and the s13 sensor has a diff looking wiering harnes!! can any of these two(s14 auto/s13) work or should i buy a new/used s14 sensor?? should i force the s14 auto sensor in the s14 manual tranny ??

thanks in advance!! =]

sorry for the complexity!!

[DreamN]

Crossmembers are interchangeable.

Edit your post because the second portion of it is incredibly hard to understand.

[projectRDM]

No. Auto and manual crossmembers are different.

The other question, no clue what in Hell you're shooting at.

[Renelovesnike]

well the crossmembers being interchangeable is a big releaf =]

[Renelovesnike]

=[ just when my hopes where up!!

its a sensor with a gear at the end so when the shaft that connects to the driveshaft spins it reads how manny times it spins!! ugh its hard to explain!!!

well my auto s14 tranny has it but it slips right out of te auto tranny and does not want to fit in the manual sensor hole!! the bore is like .01 smaller ugh soo close!! so i wanted to know is it safe to force it in or get a manual one!!

[DreamN]

No. Auto and manual crossmembers are different.

The other question, no clue what in Hell you're shooting at.

I know there is a difference, but I've read (also currently using) an auto crossmember can be used.

Edit: Forgot to mention that I have S13. Whether that plays a role into the whole interchangeable issue, I don't know.

[DreamN]

well my auto s14 tranny has it but it slips right out of te auto tranny and does not want to fit in the manual sensor hole!! the bore is like .01 smaller ugh soo close!! so i wanted to know is it safe to force it in or get a manual one!!

Oh you're talking about the speed sensor. You need to use the speed sensor for whatever chassis you're working on. Also, you need the manual one.

[Renelovesnike]

i found this and was wondering if it was safe to swap over the 5spd sensor off a s13 manual to s14 manual??

240sx Speed Sensor tutorial: Nissan Online Mechanic: Nissan Forums / Infiniti Forums - NICOclub (http://forums.nicoclub.com/zerothread/393740-240sx-speed-sensor-tutorial)

[DreamN]

LoL at safe. Your transmission won't explode if that's what you're worried about. You just won't read the correct speed. Run it for the time being if you can't find an S14 one.

[Renelovesnike]

LOL i just didnt wana strip the teeth!! and i just learned that if i put the s13 speedo in my s14 it reads double!! i guess just dish out the money =[ cuz we all know how manny s14 in the junkyard!!! LOL (self pitty laugh) =[

[Renelovesnike]

OMFG!!! these are not good prices for an unemployd teenager!!!

AutoZone.com | | Vehicle Speed Sensor | SENSOR -- SPEED (http://www.autozone.com/autozone/catalog/parts/partsProduct.jsp?skuDescription=Duralast+/+Vehicle+Speed+Sensor&categoryDisplayName=Engine+Management&fromString=&itemIdentifier=364584_0_0_3498&productId=364584&sortType=&parentId=59-0&filterByKeyWord=&isSearchByPartNumber=&navValue=15900430&categoryNValue=&fromWhere=&itemId=430-0&displayName=Vehicle+Speed+Sensor&store=5945&searchText=&brandName=Duralast)

[essforteen]

The s13 speed sensor on the s14 will make your speed read double. thus increasing the millage on your odometer faster! Get the s14 speed sensor for the manual. and i heard you have to buy the gear and unit separately. but im not sure!

[Renelovesnike]

thanks for the advice!!!