S13 Kouki Tail Wire Up

[Sileighty_85]

Well a while ago (and once again lately) there were a bunch of threads poping up asking for how to wire up the Kouki tail lights so i made a dummy guide.

Very Simple any ra-tard can wire this up becuase ALL THE WIRE COLORS ARE THE SAME.

Very simple clip the OEM (Zenki-Chuki) wire harness plug off the stock taillights cut the Kouki harness plug off the sockets and match the wires.

Thats it....

Brown Sockets are Brake/Parking Lights
Gray Sockets are Blinkers

http://i73.photobucket.com/albums/i235/Neil_85/180SX/DSCN1925.jpg
Outer Brake/Parking and Turn Signal
http://i73.photobucket.com/albums/i235/Neil_85/180SX/DSCN1924.jpg
Inner Brake/Parking
http://i73.photobucket.com/albums/i235/Neil_85/180SX/DSCN1922.jpg

As a bouns heres the Silvia Q's (Dual Projector) wire up

all ya gotta do is cut the the OEM pop up light harness and splice it into the Silvia haress .
I cant remember what the whole Silvia H/L harness looked like I think mine was cut when i got them. So if yours is cut heres how you wire it up

http://i73.photobucket.com/albums/i235/Neil_85/180SX/DSCN1926.jpg

http://i73.photobucket.com/albums/i235/Neil_85/180SX/DSCN1927.jpg

Done