View Full Version : Cluster Issues..
JooNKing
09-04-2009, 08:33 AM
I have a 1990 240sx with a sr swapped in, it my first manual car and i did not do the swap myself. so the issue is that the tachometer and speedometer is not functioning but fuel and temp works.
so far i have checked the wiring to the ecu and they are correct, also its a dohc cluster.
Im a novice and dont really know where else to look. If you guys can help guide me i would appreciated it.
Thanks in advance
94_240sx
09-04-2009, 08:43 AM
Remove the cluster and see harness is plugged in properly. There are 3 plugs on the back of the cluster.
rojas84
09-16-2009, 10:37 AM
i puchased a 90 240sx w sr20 and have similar problem except mine is the gas/speedo guages should i check the wiring hehind cluster also?
projectRDM
09-16-2009, 11:18 AM
I have a 1990 240sx with a sr swapped in, it my first manual car and i did not do the swap myself. so the issue is that the tachometer and speedometer is not functioning but fuel and temp works.
so far i have checked the wiring to the ecu and they are correct, also its a dohc cluster.
Im a novice and dont really know where else to look. If you guys can help guide me i would appreciated it.
Thanks in advance
Make sure the wiring is correct to the dash plug from the ECU, yellow/red for tach, yellow/green for VSS.
memphis180sx
09-16-2009, 11:35 AM
check for grounds also
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.