PDA

View Full Version : CA Built ka24det part out!!!


tek_88
08-31-2009, 10:10 PM
The car ran really strong, cruised around 14-15 on the wideband and 11.9 on WOT @ 20psi w/ no knock. No leaks, or over-heating, tested compression and it was 150psi on all cylinders.

Engine:
All parts has 6000 or less miles on them
-Wiseco 9.1 CR, .020 over bore pistons+Pauter X Rods-SOLD!!!
-Rebuilt S14 Head-$140(PENDING)
-JWT S1 Cams w/ JWT Adjustable sprockets-$520 shipped
-Turbonetics t3/t4 turbo, .63A/R Stage 3 Turbine, no shaft play-SOLD!!!
-OBX T3 turbo manifold+Custom made downpipe-SOLD!!!
-OBX 44mm wastegate w/ 7, 14, and 20psi spring-SOLD!!!
-CX-RAcing FMIC w/ 2.5" pipings+Blitz DD bov-SOLD!!!
-AEM Water/Methanol Injection(smallest nozzle has stripped thread, but is currently on the ic cold pipe and holds just fine @ 20psi)-$240 shipped
-Oil filter relocater-SOLD!!!
-Topfeed Fuel Rail+60 lbs High Impedence Siemens Deka Injectors and injector clips(the fuel rail has been drilled the fit 14mm o-ring injectors)-SOLD!!!
-Nismo Type-B FPR-SOLD!!!
-z32 maf-SOLD!!!
-CX-Racing 2 row radiator-SOLD!!!
-Glow shift blue digital oil pressure, and blue digital water temperature gauge and glowshift fuel pressure gauge-$120 shipped for all three.
-TXS Knock light-$SOLD!!!
-S13 Calum Ecu-$SOLD!!!
-Kennebell BAS-$220 shipped
-Two sets of stock mounts-$25 shipped for each pair

Please add 3% if paying by paypal, thanks. I can also deliver to the Bay Area and Fresno Area or any cities in between for a small gas fee.

Call me at 530-781-3157 or email me at [email protected] Here's some links to pictures:
http://i130.photobucket.com/albums/p246/tekvang/07-30-09_1238.jpg
http://i130.photobucket.com/albums/p246/tekvang/07-30-09_1239.jpg
http://i130.photobucket.com/albums/p246/tekvang/06-07-09_0952.jpg
http://i130.photobucket.com/albums/p246/tekvang/06-07-09_0954.jpg
http://s130.photobucket.com/albums/p246/tekvang/

deuceforty
08-31-2009, 10:24 PM
how much for the fuel rail?

bpark919
08-31-2009, 10:39 PM
how much for the entire thing? ...swapped into my car? i have a single slammer

ahboy401
09-01-2009, 12:25 AM
what has been done to the head for the rebuild?

krisdeezy
09-01-2009, 12:29 AM
any pictures of the oil filter relocation ?

n240sx
09-01-2009, 07:56 AM
Check your PM's. I'll take the Calum ecu

punxva
09-01-2009, 02:08 PM
interested in the rods and pistons. how many miles are on them.

thundertiger25
09-01-2009, 07:30 PM
PMed you about the turbo.

punxva
09-04-2009, 04:37 PM
pistons and rods sold to me

tek_88
09-06-2009, 03:00 PM
List update:
JWT S1 Cams with Cam gear-$480shipped
Kennebell Boost A Spark-$200shipped
Stock motor mounts-$15shipped

or best offer...

tek_88
09-11-2009, 03:53 PM
bump....someone buy the cam and bas, throw me an offer

tek_88
09-18-2009, 11:56 AM
mods please close thread...thank you