PDA

View Full Version : CA 89' 240sx coupe


tek_88
08-31-2009, 09:43 AM
Hello everyone, I'm sell my car, it's a primer black coupe (http://zilvia.net/f/), silvia front w/ metal hood and fenders, custom made valances. The type-x sides and front bumper don't come with the car my bro already called dibs on them but a front bumper is only like $200 around that price. The car runs really strong, cruises around 14-15 on the wideband and 11.9 on WOT. No leaks, or over-heating, tested compression and it was 150psi on all cylinders. Interior is decent except for the cracked dash, has HUD that works, s14 seats, p/w, p/l, p/s, electrichttp://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif (http://zilvia.net/f/) sunroof, Commando alarm, clean title, and no frame damage. Car is smogged and it passed legally, all I did was put the stock stuff back on to make it pass.

Engine:
Has 6000 miles
Wiseco 9.1 pistons
Pauter Rods
Clevite Bearings
All ARP Studs, Bolts
Cometic Headgasket
Rebuilt Head
JWT Cams
JWT Adjustable sprockets
Turbonetics t3/t4 turbo, .63A/R Stage 3 Turbine
OBX T3 turbo manifold
Custom made downpipe
44mm wastegate w/ 14psi spring
Test pipe
3" catback
FMIC w/ 2.5" pipings
Blitz DD bov
AEM Water/Methanol Injection
Oil filter relocated
Short Shifter
60lbs High Impedence Siemens Deka Injectors
Top Feed Fuel Rail
Nismo FPR
Z32 Fuel Filter
Walbro 255 fuel pump
3" intake pipe
z32 maf
CX-Racing 2 row radiator
Altima Electric Fan
Electric (http://zilvia.net/f/) Fuel pressurehttp://images.intellitxt.com/ast/adTypes/2.gif (http://zilvia.net/f/), oil pressure, water temperature gauge
TXS Knock light
Commando Alarm
Calum Ecu
Kenwood deck, and speakers...btw car is sitting on stock suspension (http://zilvia.net/f/#)

http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 799x599.http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 799x599.http://i130.photobucket.com/albums/p246/tekvang/240sx/Silvia/After/102.jpg

Now onto the bad part, my flywheel broke off and destroyed my tranny. So you are going to need to replace the tranny, clutch(I still have the d21 flywheel if you're interested), slave cylinder, starter and a new short block.

Asking $5300obo, I'm not really firm on the price just give me an offer. Call me at 530-781-3157 or email me at [email protected] Here's a link to some more pictures:
After pictures by tekvang - Photobucket (http://s130.photobucket.com/albums/p246/tekvang/240sx/Silvia/After/)

tek_88
08-31-2009, 10:15 PM
Please close thread as I'm deciding to part out the car, thanks.