Brand new set of Drift Freaq custom urethane KA/SR engine mounts.

[drift freaq]

This is a brand new set high durometer Polyurethane engine mounts $120 is the price.
I used to sell these all the time in a group buy here many people have run or run them.

They do not have solid rods all the way through so they do not transfer vibration. They are made from high durometer Urethane.
Not Polyurethane tubes or Industrial urethane window caulk you buy at Home Depot.
The mounts are track tested and have been used on many race cars. (THIS SET IS NEW) I am talking about these mounts in General.

They are stiffer than Nismo mounts, but not bone jarring, in fact they are quite nice. They keep your engine from moving, in fact it sits nice and still.

Oh and if you are going to use these on a turbo car? I suggest strongly you keep your exhaust side stock heatshield and use it with these.

http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0573.jpg

[zenki.life]

i have a friend who wanted some mounts and i suggested yours instead of nismos. so ill call him right now and tell him

[drift freaq]

i have a friend who wanted some mounts and i suggested yours instead of nismos. so ill call him right now and tell him

cool hope he realizes these are dope. :D

[bardabe]

^^^ top quality motor mounts, i'll recomend these over Nismo mounts any day of the week. you need to make some for Z32's Dave

[Quban.Russian mx73]

do you have any SOLID mounts available

[Nezahualcoyotl]

PM sent...

[zenki.life]

dave, hes checking his funds. i did suggest these to him over the Nismos again.

[drift freaq]

do you have any SOLID mounts available
these are solid. Solid Urethane.

[singlecamslam]

Do these make the engine sit any different in the car? like higher or lower.

[drift freaq]

Do these make the engine sit any different in the car? like higher or lower.

it will actually drop the engine down around 1/2 inch. It makes the engine sit lower than with the Nismo mounts by about 1/2 inch.

[zenki.life]

it will actually drop the engine down around 1/2 inch. It makes the engine sit lower than with the Nismo mounts by about 1/2 inch.

omg. i dont know how to tell you just how useful that is. when the nismos were installed the engine sat HIGHER!!!! ugh. in my friends the stupid valve cover actually rattled against his strut bar. needless to say he needed to re buy a new strut bar with that stepped design

[singlecamslam]

Hmm these sound nice, might pick up a set. Are these limited or are you gonna have a batch because i dont have the cheddar right now. And would you need to lower the transmission some to keep the right driveline angle?

[drift freaq]

Hmm these sound nice, might pick up a set. Are these limited or are you gonna have a batch because i dont have the cheddar right now. And would you need to lower the transmission some to keep the right driveline angle?

If there is a market I will have them. There is starting to be interest again. If it pans then I will definitely have them.

Oh and no you do not need to lower the transmission the difference is actually within factory specs.

The Nismo mounts actually raise the engine around a 1/2 inch. Stock blown mounts usually sit around a 1/2 inch lower than new mounts as well.

Lots of people drive around on stock blown mounts. LOL

[drift freaq]

Lots of questions lots of interest, no one has stepped to the plate with money. Oh and no unless you have something I really want or need most trades I am not interested in.

[SAKURA]

hey drift freaq, i need to lower my SOHC about 3/4 inch to clear my SECRET WEAPON.
or cut my hood. which aint gonna happen.
will you be able to make mounts with that spec in the future?

[zenki.life]

hey drift freaq, i need to lower my SOHC about 3/4 inch to clear my SECRET WEAPON.
or cut my hood. which aint gonna happen.
will you be able to make mounts with that spec in the future?

you mean like the SECRET WEAPON intake? lol

[USMC101st]

What is the Shore Durometer Hardness of these?

[drift freaq]

hey drift freaq, i need to lower my SOHC about 3/4 inch to clear my SECRET WEAPON.
or cut my hood. which aint gonna happen.
will you be able to make mounts with that spec in the future?

I would have to see. As far as durometer goes these are 70 last time I checked with the Polyurethane guys.

[SAKURA]

you mean like the SECRET WEAPON intake? lol

nah, lol. gonna go ka24er. m62 is too tall, dont think ill even be able to run a strut bar.
now if i had the skrill to get a smaller kenne bell or whipple, then i prolly wouldnt have this problem.
kenne bell with ITBs and nismo carb intake... that would be fresh.

[drift freaq]

back on up for these.

[Dman II-40]

How does in cabin vibration rate on these vs Nismo?

[drift freaq]

How does in cabin vibration rate on these vs Nismo?

There is no real cabin vibration with these. Yes they are stiffer than Nismo but not to the point that you get cabin vibration you notice.

[TerminalSamurai]

Are you going to do another group buy per chance? or do you have any more on hand? I would like to get a set when they come along.