CP pistons, SR Coil packs, SR MAF, S13 Silvia Steering Wheel, some other stuff.

[ISTOTOSAO]

I am located in SoCal, but still 2 hours from LA or the OC. Shipping is not included in any of the prices. All prices are OBO


USED SR CP Pistons. 86.5mm - 9.0:1 compression ratio. I had a machinist look at them. He said they are just fine, except the wrist pin holes need to be honed a tiny bit. He quoted me $10 to do it.
Right now one of the wrist pins is gone (I never got it back), and you would need new rings. If you want to buy them like this: $225
If you want me to get them ready to drop in for you: $425
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00631.JPG

S13 SR Coil packs and harness: $75
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00630.JPG

S13 SR MAF and pigtail: SOLD

S13 Silvia Steering wheel: SOLD

Coupe trunk lid with spoiler: $40
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00620.JPG
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00619.JPG

5-Speed swap except the transmission. You'd probably want a new slave cylinder too: $170
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00625.JPG
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00628.JPG
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00629.JPG

Coupe doors with power windows (no interior panel or switches): $30 each
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00638.JPG
Mirrors not included
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00639.JPG
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00642.JPG
Mirrors not included
Coupe (with sunroof) Rear black interior. Dude painted the brown dash and door panels black.... So A,B,C-pillars plastic, headliner retainer. $20
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00626.JPG
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00627.JPG

Coupe Taillights $70 for both
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00622.JPG
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00623.JPG

Working HUD cluster with harness (not shown)$60
http://www.ziptied.com/Coppermine/albums/userpics/10732/DSC00624.JPG

Some other stuff off of a coupe later once I decide which stuff I want to keep.

[RacerX1]

2 hours which direction? I'm in Hollywood and I need the SR maf, not sure if shipping would be worth it- 91606

[ISTOTOSAO]

I am east from everything. I am in the mountains above San Bernardino; Crestline to be specific.

Shipping through USPS, priority mail, would take 2 days and be $6

[alex_king21]

is the steering wheel the stock s13 one or what does it look like?

[alex_king21]

and would you sell just the spoiler?

[alex_king21]

one more thing is the driver side door

[ISTOTOSAO]

I sent you a PM in response to your posts.

[projectx605]

can you send me pics and a shipping quote to 92660 for the 5speed swap [email protected]

[ISTOTOSAO]

can you send me pics and a shipping quote to 92660 for the 5speed swap [email protected]

Do to the size of the hard line to the slave cylinder I don't think anyone will ship it.

I will deliver it personally for $30 more. That would be $200 to your door.

[AZRB20]

PMed OP :)

[bpark919]

is it possible to swap that HUD into my s13 hatch? and how much trouble would it be? haha. pretty interested, does it come with the projecting onto the windshield?

[bpark919]

oh and also... would this work for a ka24e? and a de?

[roboticnissan]

good looking stuff good prices

[ISTOTOSAO]

is it possible to swap that HUD into my s13 hatch? and how much trouble would it be? haha. pretty interested, does it come with the projecting onto the windshield?

The easiest thing to do would to be to get a HUD dash and add this on. I have a brown dash that has been painted black (with a couple small cracks) that I'll throw in for $10. It does not come with the reflector for the windshield, but that little box on the left is what projects on to the windshield. You can still see it just fine with out the reflective patch.

This is from a KA24E. I am not sure if it will work for a KA24DE. I would assume so since it can work with an SR.

good looking stuff good prices

Thank you sir.

[Propaganda]

This is from a KA24E. I am not sure if it will work for a KA24DE. I would assume so since it can work with an SR.
The cluster is an SOHC digital cluster with a SR20DET analog tachometer put in. That is why you can't see all the tick marks. You can make it work for the SOHC by switching tachometers, but you will still have most of the tick marks missing..

Do 65 shipped to 32257 for the steering wheel?

[ISTOTOSAO]

The cluster is an SOHC digital cluster with a SR20DET analog tachometer put in. That is why you can't see all the tick marks. You can make it work for the SOHC by switching tachometers, but you will still have most of the tick marks missing..

Do 65 shipped to 32257 for the steering wheel?

I was only thinking of the speedometer. It didn't even register to me to think about the rest of the cluster. Thank you for the heads up and the clarification.

Because of Paypal fees and three other people being interested in the wheel right now $65 is just a hair short.

I can get it to you 2 day priority USPS for $70. Like I said stupid Paypal fees.

[Propaganda]

blah.. IDK if you are able to wait a few days for me since I have to transfer money into my account

max i can do is 75

[ISTOTOSAO]

I can hold it through tomorrow for you since you jumped in and helped with the HUD, but after that I have to go with getting money in my pocket.

I am running a first money gets it policy, because it gets rid of a lot of confusion for me. Plus the sooner I get money the sooner I can get my car running.

[Propaganda]

Wheel is mine.. money is sent

[ISTOTOSAO]

Wheel is mine.. money is sent

This is true.

[ISTOTOSAO]

Propaganda: Steering wheel will be shipped out today.

I will have more parts up this weekend.