TiAL BOV with a stock MAF?!?!?!

[Burglervr6]

So I have been wanting to run a Tial BOV but was told not to b/c they seem to stay open while just crusing and not just under load.....just curious if I can or what?? I was running Haltech standalone and had no problem just wondering if I will still be able to run it with a z32 MAF and stock ECU

[sweet89s13]

try doing some searches(or do some research) or gtfo of this site.

[projectRDM]

If a blowoff valve stays open during cruising, it's defective.

[Z33dori]

you need the correct spring

Stock sr should use 11psi spring

[Ceepo]

All what they said, if the bov isnt doing its job why use it...

[S14_Kouki]

Its a BOV just like any other expensive BOV it should stay shut. Y dont u try and and tell us. If you are running a heltech why are u going back to stock ecu??

[Mirage]

http://www.tialmedia.com/documents/w3_tial_bov50_sp.pdf

Check your vacuum at idle and get the right spring. Whoever told you that is a moron.

[irritatedmax]

wouldn't it be venting metered air? or are you getting the new recirculation housing thing? it seems when ka's vent a bov with a maf setup it always leads to trouble. is it different with sr's?