View Full Version : sr oil pick up/striner question.
monkeyslide17
08-21-2009, 12:57 PM
Ok you guys I have looked through some of these post and things, cant find any thing. So here we go, I'm going to be up grading to a Moroso oil pan, not trying togo the cheap way out, but I all so want to go ahead and do the oil pick/strainer. S14 part number 15050-65F01, Is there a cross over to a usdm? SR20de on this part? Or if u can just point me in the right direction. Thanks you guy.
McCoy
08-21-2009, 02:24 PM
Several places sell it online. Cheapest place I could find, and where I purchased from, was thenismoshop.com. $19.95 for the S14 oil strainer.
garagelu
08-21-2009, 04:50 PM
ebay sells them too. Make sure you buy the s14 pickup gasket. On s13 pickup, they use a o-ring.
wangan_cruiser
08-22-2009, 05:39 PM
sorry to thread jack but how s13 strainer and s14 strainer be different/>
om3ga
08-22-2009, 06:59 PM
theres a thread/writeup about putting an S14 oil pickup on an S13 SR20DET, Its got a larger opening and a better way of being supported internally. Ill try to find the write up, And also that gasket replaces the O ring on even the s13 SR its better than the O-ring type stock gasket.
SxMachine
11-15-2009, 08:15 AM
Heres the writeup on the s14 oil pickup over the s13 pickup.
How To: SR20DET Oil strainer/pickup tube replacement/update.: 240SX Forum / 180SX Forum / Silvia Forum: Nissan Forums / Infiniti Forums - NICOclub (http://forums.nicoclub.com/zerothread?id=421569&postid=5135726)
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.