SAFC Clearing question

[koukiVLAD]

So my car runs shitty because my SAFC setting reset for some reason (dont know why maybe my buddy messed with it), can I reset it to run good? I heard you have to initialize it and then it resets, but will my carun good? Does initialize makes everything to stock levels or? I just want my car running decently before a real tune so I don't blow it up...

my setup:
s14 sr20det
z32 maf
370CC inj
thanks guys

[fliprayzin240sx]

If he reset the SAFC, then he probably resetted the MAF setting. Check the MAF setting on there, if the IN and OUT is the same number, then its set for a stock MAF. Go set it for IN:2 OUT:6 for the Z-maf.

[koukiVLAD]

Thanks man, but is it 2:6 or 2:5? in the manual it says 2:5 but some people run 2:6..

[rc1honda]

Might seem like a stupid question but why not just run a stock SR MAF, with a stock ECU?? I mean you have stock injectors what do you need the z32 MAF for, you will max out your 370's way before you max out the stock SR MAF

[bardabe]

If he reset the SAFC, then he probably resetted the MAF setting. Check the MAF setting on there, if the IN and OUT is the same number, then its set for a stock MAF. Go set it for IN:2 OUT:6 for the Z-maf.

incorrect sir, S14 SR20DET MAF is 5 S13 SR20DET MAF is 6.

basically set your SAFC to 2IN 5Out, on the MAF setting.
4 Cyliinder, Throttle Arrow Facing the Top Right, and correction set everything at 0%. that should do it