pick a brand for 30mm z32 rotors??

[westly7]

im about to put z32 brake in my s14, so far i got the calipers and the pads..and now im still looking for rotors, they have off brand which is around $100 a pair or $180 for brembo brand. is there any big different between brembo and those no name brand rotors.im using my s14 most of time for daily driving.and any recommendation for pick a conversion lines? thanks

[z2roll4life7]

You Got One company (brembo) That Test there products Uses them on there Own car and Backs there product up that it will perform at its best and then you got the other that are just knockoffs that just copy to make money... hmm wich one would you choose?

[FRpilot]

no difference really on brand for blanks. you can say brembo blanks probably equal to kragen/autozone blanks.

you might consider slotted rotors for a bit better cooling.

cross drilled rotors aren't that much of an improvement for cooling with the pads available on the market today, and if anything, the cross drill holes would more likely contribute to your rotors cracking and rust inside the holes.

[94_240sx]

Powerslot rotors are good too. I recommend ProjectNissan conversion lines.

[aznpoopy]

actually for blanks, it's all the same shit.

$100 bucks a pair? fuck that.

just get raybestos blanks off rockauto.com, $55 a pair. people run them in hpde with like, carbotech high heat pads.

if you're REALLY anal about it, get brembo blanks. they run like $100 a pair. i think tirerack sells them.

[OptionZero]

get the off brand blanks

you're not driving in f1, you're driving on the street

[Sileighty_85]

word i got some advanced Auto blanks like 25-30 bucks each, works fine for me

[westly7]

see i use my s14 for daily driving not for hardcore stuff like f1,and i prefer drilled or slotted for better looking.and im tight on budget now that is why i made this thread.if i have $$$ laying around im sure i will get the best for my ride no doubt

[westly7]

from all the responds..i think might get the off brand slotted one..anybody sell for cheap one?? and thanks for the projectNissan for the lines

[Brian]

ENDLESS.

I would go with ENDLESS.

[FRpilot]

^^

what he said

i prefer drilled or slotted for better looking.

forgo on the drilled. doesn't really look that great, a rotor with pokka dots on it? if you must have that look, get dimpled, not slotted for reason i mentioned above.

SPL also makes some nice conversion lines that are inexpensive.

[projectRDM]

NAPA blanks are like $25 each. A blank rotor is a blank rotor. As long as it's true it makes no difference who's name is on it. We've discussed this dozens of times.

[amtk240]

I recommend these but they may be over budget. They are what I went with and I am very pleased.
Circuit Sports Z32 Front Brake Rotors (26 & 30mm) [ Z32-F-BKRT ] - Enjuku Racing - Performance Parts and High Quality Fabrication (http://enjukuracing.com/circuit-sports-front-brake-rotors-30mm-p-7667.html)

BTW, Hi everyone! This is my first post here. I might be a new member to Zilvia but I have been a 240sx owner since 2001.

[westly7]

hmm...thanks for inquired

[OptionZero]

if he wants to buy brakes for looks he should get those bullshit Endless covers


if you're going in the wrong direction, you might as well go all the way, close your eyes, stick your fingers in your ears, and take the plunge

jump off a cliff