PDA

View Full Version : PA FS/FT RHD 1995 345rwhp Built SR20 S14.5!!!


matt11145
08-11-2009, 10:40 AM
DONT post unless you are actually interested!

PICTURES= http://www.cardomain.com/ride/3354408 (http://www.cardomain.com/ride/3354408)

The vehicle is a 345whp and 312 Torque at 16psi 1995 Nissan 240sx with just about every last thing done to it and this is on low boost, the machine shop said that with the setup i have it should be good to hold about 25psi safely but i never needed anymore than the 16psi. The vehicle was completely and professionally built and tuned by Roots Factory in Coatesville, Pa. I was selling the car because I need a winter car and this just wasn’t it but now im also paying to go to automotive school so now i need more money. I’m located about 30 minutes outside Philadelphia, Pennsylvania. Please only truly interested people and if you actually have the money. ZERO joy rides, but i will be more than happy to drive it with you in the car.

I have decided to do TRADES just because some cars are to good to pass up and il deal with school when the time comes. I am willing to trade for a Skyline, Supra, or Rx-7. other others are also welcome.

Price: $20,500 OBO!!!!!! with all the extra parts
Also doing trades!!!

ENGINE

SR20DET
5 speed transmission
ACT 3 puck clutch
Greddy flywheel
555 Nismo injectors
Full gasket set
Tomei 272 cams
Tomei springs
Tomei retainers
Greddy rocker arms
Garret 35R turbo
Greddy intake manifold
Greddy exhaust manifold
Greddy front mount intercooler kit
Custom Intercooler piping
CP pistons (stock bore)
Eagle rods
Koyo fans
Koyo Radiator
Z32 mass air sensor
Tial 38mm wastegate
Turbosmart blow off valve
Greddy 3" exhaust
3" test pipe
Battery relocation kit

INTERIOR

RIGHT HAND DRIVE CONVERSION
Full black interior
S15 seats
Sparco harnesses
AEM gauges (boost, air/fuel)
Silvia digital climate control
Momo drift steering wheel
NRG release hub
Tomie Short throw shifter
STI shift nob
greddy turbo timer
Fans on/off switch
POWER FOLDING MIRRORS!
Pioneer head unit

HANDLING

Tomie 2 way diff
Tien super drift coilovers
3 degree sleeves
Tien inner tie rods
Tien outer tie rods
Rear sub frame spacers
Front lower Nismo strut bars
Rear strut bar
Axis 19X10.5 rear 19X9.5 front

STOPPING

Z32 Brakes
Front drilled and slotted rotors
Circut Sport rear drilled and slotted rotors

EXTERIOR

S15 Silvia fiberglass front end conversion
OEM S15 head lights
Full body kit
20mm fiber glass front over fenders
vented fiber glass hood
HID kit

SOLD WITH CAR
Greddy TD06 turbo setup (not connected)
Greddy Down pipe (not connected)
Greddy exhaust manifold (not connected)
Trust oil cooler kit (not connected)
Trust and Tomie oil filter relocation kit (not connected)
AEM oil pressure gauge (not connected)


CONTACT!!! Call me up anytime.

Email= [email protected] ([email protected])
Cell= 484-888-2137
Name= Matt

240sxll
08-11-2009, 11:12 AM
have pics of it??

matt11145
08-11-2009, 11:20 AM
Pictures are in RED at the top

fliprayzin240sx
08-12-2009, 03:29 AM
What the hell are 582 Nismo Injectors?!?! There's no such thing. There are 550s and 740s. Also, why such a small size injector for such a big ass turbo and what are you using for tuning?!?! Doesnt matter how built the engine is if you had no tuning to back it up.

matt11145
08-12-2009, 08:10 AM
Haha okay 1, you need to calm down. 2, I didn't say 582 I said 585 and yes that's a typo it should be 555 injectors so thank you for bringing that to my attention. 3, that's not a small injector when your only running 16 pounds. If were pushing more than yes, I would need larger ones. 4, it has a chipped ecu and it runs great. It has a very smooth curve and has no problem with that size turbo at all. Any other comments, I'm going to pm responses so it doesn't get locked.

cleantune
08-16-2009, 09:33 PM
bump for a sick ride. I've seen this in person

SP00LED
10-13-2009, 08:30 PM
15k? Would that work

matt11145
10-13-2009, 09:45 PM
Sorry, not selling anymore. Mods, please close. Thanks.