PDA

View Full Version : s13 speed govenor issue.

92sxMike
08-09-2009, 03:28 AM
Hi guys, I've been reading around the net about how you can remove the speed limiter on s13's, but be4 I snip the ecu wire and fubar something up I'd like to know if anyone has done this and works 100% without any problems. I did do a search and it's been asked before but no solution to my knowledge and the post was made 1/20/2009.
hOngsterr
08-09-2009, 03:52 AM
hmmm, id like to know that too.
the governor stops me too much
lol
dub40sx
08-09-2009, 03:23 PM
Theres two simple sensors that if you unplug there seems to be no side effects and you can go as fast as your car will allow.
blackrms13
08-09-2009, 05:35 PM
just get a Auto ECU....

or theres a sensor or something u can cut/remove...im not too sure about

this has been covered many many times before
92sxMike
08-10-2009, 10:28 PM
well i need to find a solution to this because its really annoying. So if anyone can please help me out as what wires to snip and what not.
BoostedCoupe
08-10-2009, 10:31 PM
The guy right above you told you how to do it. Put an automatic ecu in it. automatics ecus have no fuel cuts. If you would have searched you could have found this out in the time it took you to make this thread.
waynehead05
08-10-2009, 10:38 PM
Dude slow the hell down if it's really annoying.
blackrms13
08-10-2009, 10:44 PM
The guy right above you told you how to do it. Put an automatic ecu in it. automatics ecus have no fuel cuts. If you would have searched you could have found this out in the time it took you to make this thread.
well...not everyone can read...u know?