MrBlack
08-06-2009, 10:20 PM
2005 350Z, 35th Anniversary Yellow
- 6sp Manual
- Rear wheel drive
- 3.5L V6 Engine
- Normal stuff (DVD, A/C, Electric windows and mirrors, ABS, Remote locks etc.)
Power Modifications:
1. Vortech Supercharger, Polished Version $5300 + $1200 installation
2. Spearco Intercooler Front Mount - approximately $500
3. Turbo XS UTEC ECM computer $1,100 + $400 installation
4. Fuel System Upgrade 600cc Injectors, Walbro Pump 250, JWT fuel pressure regulator, and APC return system.
$1,700 + $500 Installtion
5. Upgraded 3.12 pulley with GT Motorsports Custom pulley setup $500
6. Upgraded oil line, belts, etc. $300
7. HKS Spark Plugs $180
8. Tri-Metal crank case bearings with new oil gaskets. $120 + $400 installation
9. Stillen Dual Catback Exhaust $1,100 + $200 installation
10. TiTek test pipes $200 +$100 installation
Power Train Modifications:
1. Exedy (Stage 1.5) Aluminum Flywheel & Exedy twin plate clutch $2200 + $300 installation
2. Nismo LSD (Limited Slip Differential) $1000 + $200 installation
Suspencion and Brake Modifications:
1. Rotora Big Brake Kit 6 piston caliper 14 inch front and 4 piston caliper14 inch rear, with Stainless steel brake lines
$5,500 + $600 installation
2. Upgraded Racing slotted Rotors (it glows red at night) and ceramic H6 pads - $800
3. Tein adjustable damping coilovers suspension $1,200 + $300
4. Alignment and Corner Balancing $200
5. Hotchkis Front and Rear adjustable sway bars $480
6. Brake master cylinder damper from Stillen $139 + $100 installation
Misc.
1. Buddy Club P1 limited Racing Bucket Seats (alcantara) $1,500
2. Optima Red Top Battery $100 (new)
3. 20" Wheels (8.5" front/245, 10" rear/275) and also 18" original Alu wheels with 245 tires $2000
(both set tires good)
4. Rolled fenders for the larger wheel and tires $150
5. Wheel spacers / adapters (to get wheels more wide/out) $200
I have Dyno sheets available (over 400hp), and it's capable of lot more power with 2.87 pulley.
The car has 43K miles
Supercharger was in full maintenance (bearing, sealing, impeller) at 42K by Vortech
Mods were done in either GT Motorsports or Stillen, I have all receipts
SMOG / CARB approved parts/modifications
(after removing testpipes and installing cats, which comes with the car also)
Oils changed very often and only full synthetic!
I'm asking $20900 or Best reasonable offer
(absolutely great value, Only the parts cost more if you start to build similar yourself)
Original parts (and lot of extra), receipts, dyno reports, user manuals for car and for all extra equipments available as well.
(Seats, Clutch, Sway Bars, Suspension, Fuel system and Exhaust parts, Cats, Original diff etc. lot of parts)
Email/Message or call 619-630-5373
(sorry, I can't upload pictures to this post/thread...Maybe it's just me, or my browser, but I just can't use attachments I already uploaded, and can't delete old ones either)
- 6sp Manual
- Rear wheel drive
- 3.5L V6 Engine
- Normal stuff (DVD, A/C, Electric windows and mirrors, ABS, Remote locks etc.)
Power Modifications:
1. Vortech Supercharger, Polished Version $5300 + $1200 installation
2. Spearco Intercooler Front Mount - approximately $500
3. Turbo XS UTEC ECM computer $1,100 + $400 installation
4. Fuel System Upgrade 600cc Injectors, Walbro Pump 250, JWT fuel pressure regulator, and APC return system.
$1,700 + $500 Installtion
5. Upgraded 3.12 pulley with GT Motorsports Custom pulley setup $500
6. Upgraded oil line, belts, etc. $300
7. HKS Spark Plugs $180
8. Tri-Metal crank case bearings with new oil gaskets. $120 + $400 installation
9. Stillen Dual Catback Exhaust $1,100 + $200 installation
10. TiTek test pipes $200 +$100 installation
Power Train Modifications:
1. Exedy (Stage 1.5) Aluminum Flywheel & Exedy twin plate clutch $2200 + $300 installation
2. Nismo LSD (Limited Slip Differential) $1000 + $200 installation
Suspencion and Brake Modifications:
1. Rotora Big Brake Kit 6 piston caliper 14 inch front and 4 piston caliper14 inch rear, with Stainless steel brake lines
$5,500 + $600 installation
2. Upgraded Racing slotted Rotors (it glows red at night) and ceramic H6 pads - $800
3. Tein adjustable damping coilovers suspension $1,200 + $300
4. Alignment and Corner Balancing $200
5. Hotchkis Front and Rear adjustable sway bars $480
6. Brake master cylinder damper from Stillen $139 + $100 installation
Misc.
1. Buddy Club P1 limited Racing Bucket Seats (alcantara) $1,500
2. Optima Red Top Battery $100 (new)
3. 20" Wheels (8.5" front/245, 10" rear/275) and also 18" original Alu wheels with 245 tires $2000
(both set tires good)
4. Rolled fenders for the larger wheel and tires $150
5. Wheel spacers / adapters (to get wheels more wide/out) $200
I have Dyno sheets available (over 400hp), and it's capable of lot more power with 2.87 pulley.
The car has 43K miles
Supercharger was in full maintenance (bearing, sealing, impeller) at 42K by Vortech
Mods were done in either GT Motorsports or Stillen, I have all receipts
SMOG / CARB approved parts/modifications
(after removing testpipes and installing cats, which comes with the car also)
Oils changed very often and only full synthetic!
I'm asking $20900 or Best reasonable offer
(absolutely great value, Only the parts cost more if you start to build similar yourself)
Original parts (and lot of extra), receipts, dyno reports, user manuals for car and for all extra equipments available as well.
(Seats, Clutch, Sway Bars, Suspension, Fuel system and Exhaust parts, Cats, Original diff etc. lot of parts)
Email/Message or call 619-630-5373
(sorry, I can't upload pictures to this post/thread...Maybe it's just me, or my browser, but I just can't use attachments I already uploaded, and can't delete old ones either)