Complete DIY's on starting, charging, engines, trannys, etc.

[spartanic]

How's it going guys. Here are some completed DIYs that you guys might find helpful. The repair info isn't model specific but does give you a general idea of how certain parts work. Let me know if you guys see any errors.

- Anti Lock Brake Safety Information (ABS) (http://www.garage411.com/AbsSafety)

- Air Conditioning Troubleshooting - No cool air, noisy AC, etc (http://www.garage411.com/AirConditioning)

- Ball join check (http://www.garage411.com/BallJoint)

- Brake System Troubleshoot - screeching noise, dragging brakes, etc (http://www.garage411.com/Brakes)

- Break-in procedure for new engines (http://www.garage411.com/BreakIn)

- Camshafts - removal, cleaning, inspection and installation (http://www.garage411.com/Camshaft)

- Charging System - No start, Noisy alternator, fuses burn out quickly, battery not charged (http://www.garage411.com/ChargingSystem)

- Clutch Troubleshoot - chattering, rattling, slipping, stiff pedal, and more (http://www.garage411.com/Clutch)

- Cooling System - overheating, low coolant, refilling, flushing, and more (http://www.garage411.com/CoolingSystem)

- Crankshaft and Main Bearings - removal, cleaning and inspection, installation and more (http://www.garage411.com/Crankshaft)

- Cylinder Head Overhaul - removal, cleaning, inspection and installation (http://www.garage411.com/CylinderHead)

- Drive Axle - Clunk Noises, Gear noises, vibration, and more (http://www.garage411.com/DriveAxle)

- FF Axle Shafts and CV Joint Troubleshooting (http://www.garage411.com/DriveAxleFWD)

- RWD Drive Axle Troubleshoot - clunking noises, vibration and more (http://www.garage411.com/DriveAxleRWD)

- Troubleshoot hard starting, rough idle, slow acceleration, Misfire, poor gas mileage, etc. (http://www.garage411.com/Driveability)

- Electrostatic Discharge (ESD) (http://www.garage411.com/ElectrostaticDischarge)

- Emissions Inspection - PCV, TAC, Evap, Catalytic Converter, EGR and more (http://www.garage411.com/Emissions)

- Engine Services - bead blasting, cold tank, steam cleaning, (http://www.garage411.com/EngineCleaning)

- Engine Damage Inspection - Magnaflux, Zyglo, Dye Check, Ultrasonic, X-ray (http://www.garage411.com/EngineDamageInspection)

- Engine Overhaul - cleaning, cylinder head, pistons, rods, crankshaft and more (http://www.garage411.com/EngineOverhaul)

- Engine Troubleshoot - rough idle, hesitation, backfire, detonation, low oil pressure and more (http://www.garage411.com/EngineTroubleShooting)

- Fuel System Troubleshooting - Hard starting or no-start, ping on acceleration and more (http://www.garage411.com/FuelSystemTroubleShoot)

- Heater System Troubleshoot - Low or no heat, blower not working and more (http://www.garage411.com/Heater)

- Troubleshoot ignition system, no-start, engine runs rough, etc. (http://www.garage411.com/Ignition)

- Proper vehicle jacking and wheel removal procedures (http://www.garage411.com/JackVehicle)

- Manual Transmission Repair - Troubleshooting noisy gears, gears clashing, hard shifting, etc (http://www.garage411.com/ManualTransmission)

- OIL PUMP - Rotor and Gear type (http://www.garage411.com/OilPump)

- Parasitic Load Explanation and Test Procedures (http://www.garage411.com/ParasiticLoad)

- Pistons, Connecting Rods and Bearings - removal, cleaning, inspection (http://www.garage411.com/PistonsAndRods)

- Power Steering Troubleshooting (http://www.garage411.com/PowerSteering)

- Safety in the Garage (http://www.garage411.com/ShopSafety)

- Spark Plugs - troubleshooting, carbon deposits, electrodes, etc. (http://www.garage411.com/SparkPlug)

- Starter Troubleshooting - no start, no clicks from solenoid, etc. (http://www.garage411.com/Starter)

- MANUAL STEERING GEAR TROUBLESHOOTING (http://www.garage411.com/SteeringGear)

- Suspension alignment troubleshoot - tire wear, odd suspension noises, etc. (http://www.garage411.com/Suspension)

- Tie rod test (http://www.garage411.com/TieRods)

- Timing Chain and Belts - tension adjustment, gear backlash, runout, etc. (http://www.garage411.com/TimingBelt)

- Undercarriage Quick test - this finds loose suspension parts that need replacement. (http://www.garage411.com/UndercarriageQuickTest)

- Warped Rotors - this test helps determine if your rotors are warped. (http://www.garage411.com/WarpedRotors)

- Wheel Alignment Operations - camber, caster, toe, steering axes and more (http://www.garage411.com/WheelAlignment)

- Wheel Bearing Quick Test (http://www.garage411.com/WheelBearing)

[w0nderbr3ad]

all your links are belong to us. megafail

[pungkiteater_671]

supermega FAIL

[Dee]

http://metalmonstermarketing.com/blog/wp-content/uploads/2008/07/fail.jpg


I was expecting some good ish too :(

[upsdude]

Forbidden

You don't have permission to access /FuelSystemTroubleShoot on this server.

Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.


FAIL :down: i'd rather have been rick-rolled haha

[Dee]

It works if you go to www.garage411.com (http://www.garage411.com)(copy and paste link) then click "Nissan 240sx 1989-1994 S13"


Direct linking isn't permitted though...good info at that site.

[SochBAT]

^^

Yea, that doesn't work either.

[Propaganda]

^^

Yea, that doesn't work either.

You suck at reading.. he said COPY AND PASTE

Anyways, I looked at it and it looks like stuff you can find in the FSM

[clark]

you sent us up teh link. i want to look at the cv axle troubleshooting!

[clark]

it works if you go to garage411.com WITHOUT the www

[zenki.life]

this is stupid. seriously.

[jspeedm]

wtf...................

[airforceone451]

here's a compilation of the links that circumvents the server restrictions on garage411

http://fhurl.com/c100006 (http://fhurl.com/c100006)

[palmdale_mob]

If you type in the website and click nissan 240sx it actually has some useful stuff

[spartanic]

Hey guys sorry about total screw up on the errors. When you click on the links you get an error but if you hit enter than the link will work fine after that. I'm not even sure why it does that but i'm looking into it.

Thanks for your patience.