need help sr tranny harness

[phantomfoot]

i doing s13 black top sr20 into 88 240sx and i have this problem with the lower SR20 harness (not the KA) has only 1 plug on it that connects to the middle plug of the row of 3 plugs on the passenger fuse box. is this correct?

are they any way to make this work because i don't have the KA lower harness.

plz help me PP. i spend 2 months of my paycheck for this swap and trying to make it run.


Thank

[FRoSt415]

I would recomend that you get a lower harness from a car thats getting parted out or go to a junkyard to pick up the lower harness and the needed sensors on the tranny if you need them. u have an 88? Probably is an 89 meaning u had a single cam in there. If u did have one then u need to get another guage cluster for the tach and speed to work.

[phantomfoot]

^^^^^
thank you


so it no other way to make the sr lower harness work

[teamsprock]

If you are refering to the lower harness that is coming off the tranny/starter/alternator I do not believe you need the KA harness for that. If you are needing to know where all the wires from that harness go I can help you out, I just ran into that problem myself the other day because all of my clips where cut off from my SR harness. I also have an 89 240sx. The three plugs on the fuse box that are closest to the engine all need wires ran to them.

If I am understand your problem correctly just shoot me a PM and I can give you the wire colors and where they connect into the fuse box.

[FRoSt415]

^^^^^
thank you


so it no other way to make the sr lower harness work



You can make it work just to much trouble to do so. i like to keep the sensors with male and female connectors, but u can just wire it straight to the sensors and chop off the male and female connectors. I reread your post and u have the sr harness so what u can do is find out the wires needed to splice together with the sr lower harness and it will work, thats what i did. If u do not want to go this route,then get another harness.

[phantomfoot]

I will try to wiring the lower sr harness to The three plugs on the fuse box myself,so if you know how to wiring them together plz tell me or any other way to make it work with out get the Ka lower harness.

thank you

[FRoSt415]

dont know what u sayed, please edit and i will check back tomorrow

[phantomfoot]

anymore info?