PDA

View Full Version : FL Fully Built S13 part out,Defi,Tomei,Greddy,Apexi,Sparco,Nardi,Koyo,Flex alite


TheHustleHouse
07-29-2009, 09:01 AM
:sadwavey::sadwavey::sadwavey::sadwavey::sadwavey: :sadwavey::sadwavey::sadwavey::sadwavey:

http://i226.photobucket.com/albums/dd85/ejaranilla/Picture006-1.jpg
http://i226.photobucket.com/albums/dd85/ejaranilla/Picture007-1.jpg
http://i226.photobucket.com/albums/dd85/ejaranilla/Picture008-1.jpg
http://i226.photobucket.com/albums/dd85/ejaranilla/Picture009-1.jpg
http://i226.photobucket.com/albums/dd85/ejaranilla/Picture010-1.jpg

http://i226.photobucket.com/albums/dd85/ejaranilla/Picture017.jpg

http://i226.photobucket.com/albums/dd85/ejaranilla/Picture024.jpg

http://i226.photobucket.com/albums/dd85/ejaranilla/Picture031.jpg

http://i226.photobucket.com/albums/dd85/ejaranilla/Picture046.jpg

http://i226.photobucket.com/albums/dd85/ejaranilla/Picture043.jpg

http://i226.photobucket.com/albums/dd85/ejaranilla/Picture030.jpg



Here we go, i really dont wanna do this but i need to to help out my family and myself financially. Sold my Volks to fix the car but just realized its not worth it and money would be better spent helping out with bills
All parts where purchased Brand new, all have seen less than 2000 miles so they are VERY gently used.

Im putting prices on all parts that i would like to get , but will take offers. I am also leaving for Army basic training soon and would like to sell asap.

I will be editing this thread as i add pictures and add parts as i get them off the car.

REMEMBER PRICES ARE OBO AS WELL as long as its reasonable.


:wavey:



$30 shipped-Megan Steel master cylinder shield

$85+shipping Used Sr20det CAS with generic plastic cover.

$400 shipped. Automatic taser for vehicle- yes a fucking taser for your car made by the same people who made the CX-9 taserguns cops use. i bought this brand new 2 years ago and never used it in my car i just wanted to play with it haha. Paid $450 on ebay, after a epic battle with another dude.
I will say this, it fucking HURTS and the video does not do justice, it is intimidating as hell once activated, i never used it in my car because frankly i was scared i would forget and get shocked. New in its cover bag with remote. Video below :boink:

YouTube - Protect your car with the Auto Taser - 1998 (http://www.youtube.com/watch?v=ey3XDc27RCw)


Newly added-

Raceon USA Carbonfiber hood for S13 Silvia Fronts Minty fresh with Aerocatch locking hood latches $600 Shipped

$50-shipped Full race vacuum block never used brand new.

$72- shipped Nismo Adjustable Fuel pressure regulator.



Engine-


SOLD-Shipping Koyo radiator,Flexalite 220's with Greddy type S radcap under 2000 miles Good condition.
SOLD-shipping- Black Samco hoses for sr20det excellent condition less than 2000 miles normal wear from worm drive clamps on clamping area.

SOLD-shipped REAL JDM AUTHENTIC NISMO S13 SILVIA KEY UNCUT
(These are discontinued and u will never find them, if u do they go for about $100 nissan pn#KEY01-RN008)



$60+shipping Black sparco floor matts, driver side has normal wear and tear of heel toeing and in car blowjobs(jk).

$280+shipping Snow Performance Methanol Inection system stage 2
comes with upgraded pump, 3 quart tank

$8.50+shipping per gallon 8 1 gallon jugs of premixed Snow performance methanol 51/49 mix

SOLD-shipping Greddy Oil pan, painted Berlina black to match my engine block. threads were re-tapped, also used bigger drain bolt. does not leak and it seals tightly.

$55 shipped BRAND NEW Full race Vacuum manifold block.


$225 Shipped Greddy light weight pulley set

$10+shipping each, 10 new 30/40 amp Bosch style relays with relay bases pre-wired.

SOLD- shipping GT2871r .64 Oem style (less than 1000 miles) has like 1/2mm of shaft play which it had brand new which is normal.

SOLD-shipped Tomei 740cc injectors

SOLD+shipping Tomei Expreme manifold (less than 1000 miles)

Sold-shipping Megan Racing Turbo outlet with O2 bungs welded on for wideband and stock o2 sensor (less than 1000 miles)

SOLD-shipping Hand Polished Greddy intake manifold S13 Sr20det

$60+shipping Titan Motorsports Steel downpipe-



SOLD Agency Power Stainless exhaust, Ti muffler

SOLD-shipping Tomei Spark plug cover (brushed aluminum)

SOLD shipped HKS SSQ with recirculation fitting


Sold-Shipped Circuit Sports Aluminum overflow tank

Will part out motor itself if i can get buyers for the parts-

I have a Tomei Solid lifter head with Tomei Procam 270's 12.5mm lift, Fresh OEM Rocker arms, Brian crower titanium Springs and retainers, stock valves.

Can part it out or sell as whole.


Interior-

$350 EACH +shipping Two Sparco Fighters in black, with Seat bases and Sliding rails (look new, not even any signs of wear besides being dusty) or cut price in half for 1 seat (one left! PASSENGER SIDE)


$150+shipping Corsport harness bar (no rear passengers)

$60+shipping Top Secret fire extinguisher made by firemaster.(purchased from bullet proof automotive)


Electronics-


ALL DEFI ITEMS ARE SOLD!!!!
$130- Shipped TT Z32 MAF

$240 Shipped Greddy Profec B Spec 2 black mint condition

SOLD-shipped- Blitz FATT turbo timer black mint condition

SOLD-Shipped Innovate motorsports 52mm LC-1 wideband lambda gauge in Amber standalone gauge (used for about 200 miles)



$500 shipped- might be selling Custom Rom tuned ECU, Enthalpy board but custom tuned by Martin Struk at XAT racing.

tuned for,

20 psi, on GT2871, 740cc injectors and z32maf 93 octane, removed speed limiter, revlimiter, 264 cams, built motor 9.0:1 CP pistons, forged rods.
380hp, on 19psi

g-via
07-29-2009, 10:05 AM
+1 for Elmer, legit seller!

**

Elmer, what version of the NRG quick release is it?

dhsil80
07-29-2009, 10:12 AM
Im sorry to hear about your situation, i hope things get better for you and your family, will you take $130.00 shipped to 33182 for the oil relocation kit and the nrg hub lock? Let me know

thanks

240Zfunahollic
07-29-2009, 10:25 AM
What condition is that steering wheel in and is it leather or suede? Also how much if you part the head for the BC springs and retainers?

drifter1000
07-29-2009, 10:35 AM
how much is the engine as a whole? Also interested in the greedy fmic pm me thanks

g-via
07-29-2009, 10:36 AM
whoever is smart will jump on those defis, 525 for unit/boost/oil press/water temp?

DEALIO!

TheHustleHouse
07-29-2009, 10:55 AM
+1 for Elmer, legit seller!

**

Elmer, what version of the NRG quick release is it?


hey bro! thanks for the backup haha.

The quick release is version 1 i think, it doesn't have the fins in the back

FullRunS14
07-29-2009, 10:57 AM
sent you a pm regarding Defis and FMIC

slow92
07-29-2009, 11:09 AM
how much for the bc springs and retainers shipped to 31405

AznDrftr.
07-29-2009, 11:14 AM
intrested in oil, boost, and water temp defi gauge let me know please, pics.

Slow_s1389
07-29-2009, 11:25 AM
interested in the nardi wheel, shoot me an email [email protected] I have my paypal ready, thanks!

sthirteen02
07-29-2009, 11:54 AM
will a/f gauge come with sensor and wiring?

sthirteen02
07-29-2009, 11:56 AM
also would you be willing to do pick up i live right behind the new titan building?

JohnnyDrfiter22
07-29-2009, 12:50 PM
Corsport Harness and Circuit Sports Tank shipped to 08052

holemilk00
07-29-2009, 01:56 PM
$415+shipping Hand Polished Greddy intake manifold S13 Sr20det

$70+ shippingTomei Spark plug cover (brushed aluminum)

$160 Apexi Suction kit for Z32 Maf (less than 50 miles) includes brand new pigtail plug.

$65 Shipped Circuit Sports Aluminum overflow tank

$175+ shipping Nardi 330mm Deep Corn steering wheel black with red stitch

$55+shipping NRG 240sx hub black

$60+ shipping NRG Hub lock Black



Please PM me pics of these items and a package price shipped to 48166

Thanks

TheHustleHouse
07-29-2009, 03:00 PM
how much is the engine as a whole? Also interested in the greedy fmic pm me thanks


im sorry man, FMIC is sold.

I dont think i will sell the engine as a whole, as i dont have the equipment to pull it anymore. I will sell the head off if interested, and may part the block out unbolting the subframe, jacking it up and remove rotating assembly.

jr_ss
07-29-2009, 03:39 PM
Pictures of the seats please...

TheHustleHouse
07-29-2009, 05:36 PM
Pictures of the seats please...


Just pulled one out the other looks exactly the same, i can take a pic of that too if u want later =D im exhausted Lol

http://i226.photobucket.com/albums/dd85/ejaranilla/sparco.jpg

http://i226.photobucket.com/albums/dd85/ejaranilla/Picture027.jpg

:eek3:

drifter1000
07-29-2009, 05:56 PM
deng it ahahha. well thanks anyways.

epics13
07-29-2009, 05:59 PM
If u have some coilovers lmk free bump.

shinmei-2006
07-29-2009, 06:14 PM
pics of the LC-1 please.

jdmchuckiwill
07-29-2009, 07:55 PM
is it a complete head .
how much for the complete head?

rednissan180
07-29-2009, 08:04 PM
willing to sell headlights?

frost1988
07-30-2009, 12:23 AM
is the shell 4 sale aswell?

TheHustleHouse
07-30-2009, 02:24 AM
is the shell 4 sale aswell?

It will be sold as rolling chassis, after part out.

Silvia Front end
Brand new Oem bricks
SPL Pro Tension arms, with brake air plate
SPL Pro Ruca
Battle version Traction rods
Megan Coilovers
Acura NSX Berlina Black with silver flake
Jun type over fenders
will have 300zx wheels 5lug
z32 front brakes with brembo slotted rotors and blanks in the rear
Origin smoked tail lights


:wiggle:

sildrift80
07-30-2009, 05:49 AM
how much is the turbo shipped to 29445?

fromxtor
07-30-2009, 09:55 AM
PM the price for the bricks

PS13 DRFT
07-30-2009, 01:31 PM
Good seller, amazing communication.

frost1988
07-30-2009, 03:42 PM
pm me about the shell i def want 2 buy it after its parted out

robtech
07-30-2009, 08:36 PM
side view mirrors for sale? if so price shipped to 95682?

s13gebala
07-30-2009, 08:52 PM
$70+shipped REAL JDM AUTHENTIC NISMO S13 SILVIA KEY UNCUT
(These are discontinued and u will never find them, if u do they go for about $100 nissan pn#KEY01-RN008)


pm me

TheHustleHouse
07-30-2009, 09:44 PM
pm me about the shell i def want 2 buy it after its parted out


i will Def let u know as soon as the part out is over, it will be a rolling chassis with most interior except bottom of backseat, front seats Sunroof needs weatherstripping, front and rear window moldings were lost by the body shop that painted the car. will roll on z32 wheels,z32 brakes, brembo calipers,Megan coilovers, SPL PRO ruca, tension rods with brake air intake, battleversion traction rods. CF hood with Aerocatch hood locking hood latches if it doesnt sell. for the right price ill leave the sparcos in it. let me know what u want in the chassis. better yet, ill send u pix.

Blackzenki82
07-30-2009, 10:28 PM
combo deal on Nardi wheel with non locking NRG QR shipped to 32615? PM me whenever you get a chance..

Blackzenki82
07-31-2009, 01:14 PM
highly interested in the Innovate LC-1, as long as it comes with guage, wiring, o2 sensor and the the PC CD for laptops drivers and shit... let me know, paypal ready

Blackzenki82
07-31-2009, 01:33 PM
....

sorry meant for PM

Boost-Fiend
07-31-2009, 01:39 PM
how much for power steering pump bracket, tensioner, and pulley shipped to 89148?

pete240
07-31-2009, 02:55 PM
tomei manifold sold to me :D

Blackzenki82
07-31-2009, 06:14 PM
payment sent for LC-1 Wideband!!!! thanks elmer!!!!!!!!

jing
07-31-2009, 08:43 PM
Is the HKS SSQV attached to the hardpipe?

TheHustleHouse
07-31-2009, 08:49 PM
Is the HKS SSQV attached to the hardpipe?

attached yes, but i can remove it easily.

mattro
08-01-2009, 10:25 AM
got that coolant over flow can still?

also do you have a 3" downpipe?

pm prices shipped to 14534

TheHustleHouse
08-01-2009, 01:23 PM
got that coolant over flow can still?

also do you have a 3" downpipe?

pm prices shipped to 14534


Pending to another member, ill let u know if it falls thru =P

kiriyama
08-01-2009, 02:47 PM
What are your plans for the rest of the car once its all parted out? Im still looking for a dash and a cheap front end conv.

madthrillzchills
08-01-2009, 05:30 PM
sorry just read page 2...LC-1 is sold

fromxtor
08-01-2009, 10:02 PM
how much for the bricks?

TheHustleHouse
08-03-2009, 07:58 PM
how much for the bricks?


i am unsure if i am going to part out the chassis as of yet, ill let everyone know by updating the post on friday.

Blackzenki82
08-03-2009, 08:32 PM
bump for a great seller!!!!! buy this mans shit!!!

stinky_180
08-03-2009, 09:03 PM
if your willing to part out just the driver side sparco seat bracket, let me know via pm

s14fbs
08-03-2009, 09:04 PM
hey pm me a price your looking to get for the shell
im in cocoa fl and i got a motor that needs a shell
i can probably pay cash

om3ga
08-04-2009, 01:29 AM
Im very interested in the Intake manifold I call dibs! Can you send me more pictures of it to [email protected] and pm me please is it the first version or second version of the greddy?

Mr.GT30
08-04-2009, 10:37 AM
do you still have Tomei solid lifter? & cams let me know how much u want them for

Blackzenki82
08-04-2009, 11:24 AM
just got the LC-1 wideband in today, superfast shipping.... BUMP again for a super awesome guy and seller!!!


for real, i'm 100% happy with my purchase!!!

polishprince
08-04-2009, 12:02 PM
would you ship the nardi wheel to canada? l1n 2k6. USPS preferred

TheHustleHouse
08-04-2009, 02:27 PM
Im very interested in the Intake manifold I call dibs! Can you send me more pictures of it to [email protected] and pm me please is it the first version or second version of the greddy?

Thanks for the interest =D

Someone is already trying to buy it but if it falls thru you will be the FIRST to know =D. I will send u some pics of it, as i need to take more for better detail and angles.

+Waldo+
08-04-2009, 03:35 PM
ttt for elmer, good seller nice guy

TheHustleHouse
08-05-2009, 02:01 AM
do you still have Tomei solid lifter? & cams let me know how much u want them for


i have a potential buyer for the entire head, if it falls thru i will let everyone interested in the cams, lifters etc know asap.

thanks for the interest!:D

roel03
08-05-2009, 06:46 PM
Great seller! One of the best I have dealt with.

I RECEIVED the product before paypal even took the money out of my account.

shortyman4065
08-06-2009, 08:29 PM
Interested in the shell, u got a PM

Blackzenki82
08-06-2009, 08:31 PM
seller continues to amaze!!!

he forgot to send the manual for the LC-1 wideband i bought, and he shipped it, with a free GReddy Gauge pod!!!!

free bump for a awesome guy!!!!

PS13 DRFT
08-06-2009, 11:19 PM
Elmer, got the intake and yessirrrr sure is pretty.

Legit guy.

TheHustleHouse
08-07-2009, 12:02 AM
Elmer, got the intake and yessirrrr sure is pretty.

Legit guy.


Cool man, im glad ur happy =D I forgot to tell u i NEvER used that intake pipe lol, just the filter for like 200 miles thats why its so fresh haha.

Let me know if u need anything else bro, and BE SAFE over in iraq man. Who knows maybe ill see u there!

(to anyone who sent me a Pm and didnt get a response or something please resend it ill get to u asap, my inbox was getting full like every few hours and i accidentally deleted some of the PM's that were not resolved. I have since upgraded to a premium account and no longer have space issues)

RB_Seth
08-07-2009, 11:13 PM
Awesome seller and a super nice guy!

Bump for good deals!

Blackzenki82
08-08-2009, 10:45 PM
ttt!!!!

buy more suff...


wish i would have seen that CS rad cap on that S13 res before hand.... i woulda scooped it up...

soshweet
08-08-2009, 11:31 PM
First i have to say your for sale thread is quite possibly the most legit sale i've seen all year. Great quality parts and some fucking steals. And a taser? Good shit man. And respect for helping out the family.

$150+shipping Corsport harness bar (no rear passengers)

What does this look like? No chance of rear passengers at all? I looked through their website (and google) to find pictures and no luck. I assume similar to the NRG bar?

TheHustleHouse
08-09-2009, 01:01 AM
First i have to say your for sale thread is quite possibly the most legit sale i've seen all year. Great quality parts and some fucking steals. And a taser? Good shit man. And respect for helping out the family.

$150+shipping Corsport harness bar (no rear passengers)

What does this look like? No chance of rear passengers at all? I looked through their website (and google) to find pictures and no luck. I assume similar to the NRG bar?

Thanks bro =D im trying to make it fair as possible, and family first always man.. even before my car Lol.

thats weird corsport doesnt have pictures up anymore, they were pushed heavily when they first came out. But yes they look identical to the Nrg bars. I guess its possible to fit passengers in the back if u have stock/ foldable seats but it not going to be comfortable at all to get in or out, nor safe Imo to sit back there. i can shoot u pics if interested i need to take some more.

And thanks to everyone leaving comments i appreciate it, i wish i had more stuff to sell, but its all sold Lol. Next is the head/block and rolling chassis.

soshweet
08-09-2009, 10:21 AM
Thanks bro =D im trying to make it fair as possible, and family first always man.. even before my car Lol.

thats weird corsport doesnt have pictures up anymore, they were pushed heavily when they first came out. But yes they look identical to the Nrg bars. I guess its possible to fit passengers in the back if u have stock/ foldable seats but it not going to be comfortable at all to get in or out, nor safe Imo to sit back there. i can shoot u pics if interested i need to take some more.

And thanks to everyone leaving comments i appreciate it, i wish i had more stuff to sell, but its all sold Lol. Next is the head/block and rolling chassis.

I for sure need one, so please send me a picture. I'm only using the lap belts and it doesn't hold. Time to install my sparcos 6pts :D

FullRunS14
08-09-2009, 04:06 PM
DEFI's are Rad!!!

Excited for the FMIC stuff to show.

Great seller and dude.

Get me that contact info if possible;)

pete240
08-10-2009, 11:23 AM
I received the manifold on Saturday :D
Thanks for shipping it out in such a timely manner :D

drifter1000
08-10-2009, 12:17 PM
hey, i talked to you once before about the intake manifold. Still available? pm me

2muchboost
08-10-2009, 12:23 PM
$350+shipping Hand Polished Greddy intake manifold S13 Sr20det...I want pix sent to [email protected] haha. No seriously i am interested so shoot me some pix.

vikktorlv
08-10-2009, 01:40 PM
I am interested in a few items. the Greddy intake manifold, the complete head, and maybe the fuel regulator. let's talk? [email protected]

drifter1000
08-10-2009, 10:18 PM
still have the turbo timer? very interested

dhsil80
08-13-2009, 07:56 AM
great seller! got my parts already, everything looks good, bump for a good seller thanks!!!

DD240sx
08-13-2009, 10:18 PM
r u selling the windsheild?

TheHustleHouse
08-14-2009, 12:58 AM
r u selling the windsheild?


Sorry man, i am not. If no one buys my shell i will part the chassis and i will let u know.







ALSO JUST WANNA LET EVERYONE KNOW, IF U ARE CALLING OR TEXTING MY PHONE, I AM IN CALIFORNIA AND I LEFT MY FUCKING CHARGER AT HOME AND MY PHONE IS DEAD. Shoot me a Pm or an email i will get back to u ASAP!:bow:

and thanks everyone!!!!!!!

xplicit240
08-14-2009, 06:52 AM
lol elmer. go buy one from china town for like 5 bux. GG

winter
08-14-2009, 06:57 AM
hahahaha rad; the auto taser is sweet

TheHustleHouse
08-17-2009, 09:32 PM
hahahaha rad; the auto taser is sweet


Lols it is fucking rad haha, want it? we can work it out over PMs =D:snoop:

240knockout
08-20-2009, 07:38 AM
interested in SPL tension rods if you end up selling them separately.

180Sil
08-21-2009, 11:29 PM
interested in the sparco fighter, PM me a price shipped to 11729

drifter_for_life06
08-22-2009, 12:15 PM
was would you be looking to get for the complete head.

PM me a price, we can talk about it

TURBOMAN
09-14-2009, 03:14 PM
cool guy
awesome person.
easy to deal with.
TTT to elmer.

snakes240
09-20-2009, 08:26 PM
do u have the pipping for the ic....n if so, hw much shipped to 07017