g6civcx
07-25-2009, 09:18 AM
This is everything I have leftover from my 3.133 diff swap.
Local guys can pick up for free (maybe nice if you spend an hour of your time helping me run some Dynamat on my car). I'll also ship if you help me pick up shipping.
* The differential is an R200 VLSD with 13mm ring bolt holes. If you want to use this with a 12mm R200 ring gear you will need 12 to 13mm spacers.
* The diff comes with matching output flanges. One of the flanges is slightly bent. I don't know if you can repair it or have to replace it.
* 5-bolt axles.
* rear cover for R200 into S14 chassis
* 4.083 ring and pinion
* R200 diff carrier and bearing caps
* side bearing spacer and adjusting washers
You have most of everything you need to build yourself an R200 VLSD 5-bolt rear end.
The diff, output flanges, and axles all match and are 29-splines throughout. The axles are 24" and 25.5" from tip to tip.
Just spend an hour with me Dynamating my car and it's all yours.
http://img204.imageshack.us/img204/2500/diff9.jpg
Local guys can pick up for free (maybe nice if you spend an hour of your time helping me run some Dynamat on my car). I'll also ship if you help me pick up shipping.
* The differential is an R200 VLSD with 13mm ring bolt holes. If you want to use this with a 12mm R200 ring gear you will need 12 to 13mm spacers.
* The diff comes with matching output flanges. One of the flanges is slightly bent. I don't know if you can repair it or have to replace it.
* 5-bolt axles.
* rear cover for R200 into S14 chassis
* 4.083 ring and pinion
* R200 diff carrier and bearing caps
* side bearing spacer and adjusting washers
You have most of everything you need to build yourself an R200 VLSD 5-bolt rear end.
The diff, output flanges, and axles all match and are 29-splines throughout. The axles are 24" and 25.5" from tip to tip.
Just spend an hour with me Dynamating my car and it's all yours.
http://img204.imageshack.us/img204/2500/diff9.jpg