racepar1
07-22-2009, 02:57 PM
Ka24e distributor, p/s pump, aac valve, and iacv valve
All items were in good working condition when removed and were stored inside. Aac and iacv valves were cleaned with throttlebody cleaner. The powersteering pump does not leak and worked perfectly, no noise.
$5 each item
P/S pump SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/blowout062.jpg
chuki bumper vent grilles
Since I made my "version 2" brake ducts I no longer need these. They are in pretty good shape, but have a couple of knicks on them.
$10
http://i275.photobucket.com/albums/jj283/racepar1/blowout058.jpg
s-13 non-abs master cylinder (7/8")
The master worked perfectly, no problems EVER. It comes with the resovoir and cap. This is MY brake master off MY car so you know it is good.
$10
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout015.jpg
Passenger's side OE chuki bumper light
This is a used, OE nissan, passenger's side, bumper light for the chuki front end. The lens is a little sandblasted, but has no chips, cracks, scratches, or fading.
$5
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout018.jpg
Ka24e (singlecam) MAFS x2
Both came out of running cars and both have been cleaned with MAFS cleaner. One uses a 3 pin connector, one uses a 4 pin connector (only 3 used). If you look closely in the pic you can read the part numbers.
$10 each
3 pin connector MAF SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout017.jpg
KA24e (singlecam) ignition coil assembly
Came out of a running car, no problems.
$5 (pending)
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout014.jpg
Used s-13 non abs front calipers
No leaks, both worked perfectly on the car.
$15
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2012.jpg
Used stock ka radiator w/fan shroud
The radiator does not leak, it came off a running car. It could use a wash though. One tab on the fan shroud is broken, but it's nothing a big washer couldn't fix.
SOLD!
Stock s-13 axles
These are in perfect working shape, came off my car. One of the inner boots has a small patch which has held for over a year.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2009.jpg
Dualcam compressor bracket w/good tensioner
The bolts that hold it to the block are included and the bearing on the tensioner pulley is still in good shape.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2005.jpg
S-13 front endlinks
3 endlinks available, all in good condition.
$5
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2004.jpg
2 pairs (4 bulbs total) of no-name LED 194 replacement bulbs
These are designed to directly replace the 194 running light bulbs. All work, brighter then stock.
$4 shipped per pair/$7.50 shipped for all 4
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3005.jpg
All items were in good working condition when removed and were stored inside. Aac and iacv valves were cleaned with throttlebody cleaner. The powersteering pump does not leak and worked perfectly, no noise.
$5 each item
P/S pump SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/blowout062.jpg
chuki bumper vent grilles
Since I made my "version 2" brake ducts I no longer need these. They are in pretty good shape, but have a couple of knicks on them.
$10
http://i275.photobucket.com/albums/jj283/racepar1/blowout058.jpg
s-13 non-abs master cylinder (7/8")
The master worked perfectly, no problems EVER. It comes with the resovoir and cap. This is MY brake master off MY car so you know it is good.
$10
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout015.jpg
Passenger's side OE chuki bumper light
This is a used, OE nissan, passenger's side, bumper light for the chuki front end. The lens is a little sandblasted, but has no chips, cracks, scratches, or fading.
$5
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout018.jpg
Ka24e (singlecam) MAFS x2
Both came out of running cars and both have been cleaned with MAFS cleaner. One uses a 3 pin connector, one uses a 4 pin connector (only 3 used). If you look closely in the pic you can read the part numbers.
$10 each
3 pin connector MAF SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout017.jpg
KA24e (singlecam) ignition coil assembly
Came out of a running car, no problems.
$5 (pending)
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout014.jpg
Used s-13 non abs front calipers
No leaks, both worked perfectly on the car.
$15
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2012.jpg
Used stock ka radiator w/fan shroud
The radiator does not leak, it came off a running car. It could use a wash though. One tab on the fan shroud is broken, but it's nothing a big washer couldn't fix.
SOLD!
Stock s-13 axles
These are in perfect working shape, came off my car. One of the inner boots has a small patch which has held for over a year.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2009.jpg
Dualcam compressor bracket w/good tensioner
The bolts that hold it to the block are included and the bearing on the tensioner pulley is still in good shape.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2005.jpg
S-13 front endlinks
3 endlinks available, all in good condition.
$5
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2004.jpg
2 pairs (4 bulbs total) of no-name LED 194 replacement bulbs
These are designed to directly replace the 194 running light bulbs. All work, brighter then stock.
$4 shipped per pair/$7.50 shipped for all 4
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3005.jpg