G-Tech Run

[HaLo]

I did 6.15 sec at 9.5 psi on my S15 turbo today. Overall, I'm satisfied, but I want some 5.7s! ;)

[Yoshi]

I'm assuming you mean 0-60 ;)

[KiDyNomiTe]

How accurate is the new GTech?

[AceInHole]

Just curious.... what do you need a 5.7 0-60 for?

[Ian]

you have an s15 sr20?!?

awesome...


what's your 1/4 mile time like?

[gohan_senshi]

It said s15 turbo....the turbo itself

[240Stilo]

Originally posted by mainevent212
you have an s15 sr20?!?

awesome...


what's your 1/4 mile time like?

I'll let you slide this time but try reading a little harder before I pull out the nOOb card:D . But, the next person might flame...who knows.

[s13ninja]

hey halo, i know the t28 bolts into place, but i hear there are lil modifications, like oil lines and what not. can you tell me about that, what you had to do to get the t28.

[Dousan_PG]

Originally posted by s13ninja
hey halo, i know the t28 bolts into place, but i hear there are lil modifications, like oil lines and what not. can you tell me about that, what you had to do to get the t28.


read this. note. if you dont have the time or SKILLS to do it, dont try.

s15 on s13 redtop (http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB9&Number=168010&fpart=&PHPSESSID=)

[HaLo]

Yeah, I meant 0-60! ;)

As for needing a 5.7 o-60, i don't NEED it, but I would like to be able to do in this setup, considering the S15 does 5.5 on their 0-100kph.

As for the T28 upgrade. I know that the oil and water lines need to be modified. Also, you'd need to do some work to clear the exhaust column. I got the turbo with manifolds and lines already upgraded when I bought it so I don't know the exact work that it needs.

[Foxcolt]

Originally posted by HaLo
Yeah, I meant 0-60! ;)

As for needing a 5.7 o-60, i don't NEED it, but I would like to be able to do in this setup, considering the S15 does 5.5 on their 0-100kph.

As for the T28 upgrade. I know that the oil and water lines need to be modified. Also, you'd need to do some work to clear the exhaust column. I got the turbo with manifolds and lines already upgraded when I bought it so I don't know the exact work that it needs.


remember published 0-60 times are performed by profesional drivers that pull incredieble 60 foot times. You'll get a jaded view if you use it as a reference point for how fast your car is.

[Nismo240SX]

i've always wanted a G-tech... where'd you get yours and how hard is it to install?

[Jeff240sx]

Originally posted by Nismo240SX
i've always wanted a G-tech... where'd you get yours and how hard is it to install?

LOL! Last GTech I used was bought from Ebay, and the install was:
1: Plug into Cigarette lighter.
2: No, no 2... only 1.
-Jeff

[HaLo]

Originally posted by Foxcolt
remember published 0-60 times are performed by profesional drivers that pull incredieble 60 foot times. You'll get a jaded view if you use it as a reference point for how fast your car is.

You're right. I've also see lots of people braking the published times. :)

[nrcooled]

I thought you just wanted to have a better 0-60 time then a WRX. It doesnt' get better than having a 0-60 that's faster with RWD than a AWD:D

[HaLo]

Originally posted by nrcooled
I thought you just wanted to have a better 0-60 time then a WRX. It doesnt' get better than having a 0-60 that's faster with RWD than a AWD:D

I should be able to beat that the moment I shove in my 550 injectors and get an ecu tuning. :)

What does the WRX do on the 0-60?

[AceInHole]

Originally posted by HaLo
What does the WRX do on the 0-60?

5.9 IIRC. I had to beat that myself since my best friend owns a WRX. Too bad for him.... I do 5.3 ;)

[nrcooled]

I run them down in third gear but they always beat me to 60mph:mad:

[HaLo]

Getting good launches with a turbo car isn't very easy. With my stock KA I used to dump at 3000 rpm... Now with the SR, I don't even know where to slip, dump or whatever. ;)