PDA

View Full Version : AL S14 SR20DET Head with IM, fuel rail, valve cover, etc


garagelu
07-15-2009, 09:51 PM
So some of you may have seen my s14 head swap project thread a while back. If you have not, here it is.

http://zilvia.net/f/tech-talk/242057-s13-s14-sr20det-head-swap-how-differences.html

I just got all the components to do the head swap and want to give you guys an opportunity to do the swap. Its very hard to come by a s14 head with everything attached.

So I have the s14 head and all the internals like valve springs, shims, rocker arms, cams, etc. The only things is that it will not come with 3 of the 8 lifters. The 3 lifters had some rust on them so I threw them away. The other 5 are immaculate.

The other stuff that it will come with: valve cover, intake manifold, throttle body, fuel rail (no injectors. you can use the ones you have), iacv wiring plugs and pigtails, coolant lines, etc. It will also come with misc things like IM gasket, valve cover gasket, etc. I have kept everything in order and put each valve's shim and rocker arm in its own baggie.

The actual head is very clean. Any dirtiness will come off if you steam or hot tank clean it. The underside of the valve cover is really clean too. I know the top looks nasty and really it just needs a paint job. This head came off a low mileage zenki sr20 engine.

PRICE: 450 shipped
Price drop to 400 SHIPPED
Please consider shipping costs. I have shipped a bare head alone and it cost 65 dollars. With the loaded head and everything else, shipping is going to cost at least 100 dollars, if not a little more.

And no I will not part out anything from this right now. Especially the valve cover so don't ask right now. All you need to know about installing this head on the s13 block should all be explained in my thread. If you have any questions, I will give my phone number to the buyer if you have any questions.

http://farm3.static.flickr.com/2644/3725051365_f370853ebc.jpg?v=1247716135

http://farm4.static.flickr.com/3432/3725036157_25324b72c4.jpg?v=1247716332

http://farm3.static.flickr.com/2625/3725847828_abe8438250.jpg?v=0

http://farm3.static.flickr.com/2536/3725043751_aa8e4fc59e.jpg?v=0

http://farm3.static.flickr.com/2574/3725855430_2753a72638.jpg?v=0

garagelu
07-17-2009, 04:37 PM
bump #1. Get this while you can.

Om1kron
07-17-2009, 07:00 PM
i wish I had the coin, I would so buy it.

garagelu
07-18-2009, 05:08 PM
I am throwing in these two freeze plugs for the front of the s14 head. Shouldn't cost you more than a couple bucks a piece to have them installed at the machine shop plus your head will look like new.

http://farm3.static.flickr.com/2576/3741151194_447167d3cf.jpg?v=0

garagelu
07-20-2009, 06:36 PM
last bump with a price drop-400 shipped

garagelu
07-22-2009, 11:23 AM
Last offer before I decide to just keep the head as a spare.

the complete head swap, two brand new freeze plugs, and brand new OEM intake side valve seals-400 SHIPPED!!!!

the valve seals are about a 30-40 dollar value!

http://farm3.static.flickr.com/2664/3746080587_c20e4244ba.jpg?v=0