PDA

View Full Version : WTB Output shafts

FinalDrive
07-12-2009, 06:48 AM
I'm looking for output shafts to fit a Kaaz model SAN2745.

Going by this chart (www.TurboImport.com - High Performance Parts! (http://www.turboimport.com/catalog/kaaz.htm)), I assume I need s14 kouki vlsd output shafts, or s15 vlsd shafts.

Let me know what you have, and what you want for them.
UNISA JECS
07-12-2009, 08:35 AM
I have some 29 spline count 5 bolt VLSD outputshafts for $120 shipped.

Picture:

http://i167.photobucket.com/albums/u159/zilvia_album/P1070200.jpg
UNISA JECS
07-12-2009, 08:45 AM
Hope your were meaning to say output side flanges and not axles.
FinalDrive
07-12-2009, 05:46 PM
yes, output side flanges

the 95 s14 vlsd abs ones i have are 29 spline count as well, but don't fit snug in the differential...they have a bit of play as if the splines aren't completely matched up. are there more than 1 size of 29 spline count output side flanges?
UNISA JECS
07-13-2009, 01:36 AM
yes, output side flanges

the 95 s14 vlsd abs ones i have are 29 spline count as well, but don't fit snug in the differential...they have a bit of play as if the splines aren't completely matched up. are there more than 1 size of 29 spline count output side flanges?

The only differenCE in the 29 spline count side flanges are lenght.

S13's with VLSD have a shorter output side flange than S14.

If you try using for instance S14 VLSD side flanges in a S13 VLSD they will stick out about 1/2" extra on one side.

Is that the type of play you are experincing?
FinalDrive
07-13-2009, 02:59 AM
no, they seem to be the proper length
the play i'm experiencing seems to be from the shaft of the output side flanges being slightly too small in diameter
thanks for the fast replies btw
UNISA JECS
07-13-2009, 08:36 AM
no, they seem to be the proper length
the play i'm experiencing seems to be from the shaft of the output side flanges being slightly too small in diameter
thanks for the fast replies btw

Do you know what year your VLSD is exactly? Its possible you have a 30 spline VLSD.
FinalDrive
07-13-2009, 12:30 PM
the vlsd is the oem one from my '95 s14 with abs

i changed the worn out vlsd unit with the kaaz model SAN2745, and the oem '95 s14 w/ abs output side flanges won't work with this kaaz. maybe i have a 30 spline kaaz?
UNISA JECS
07-13-2009, 01:22 PM
the vlsd is the oem one from my '95 s14 with abs

i changed the worn out vlsd unit with the kaaz model SAN2745, and the oem '95 s14 w/ abs output side flanges won't work with this kaaz. maybe i have a 30 spline kaaz?

Thats what I think, I know that the 96-01 Q45 uses 30 spline 5 bolt pattren output flanges and the 89-95 Q45 uses the 30 spline 6 bolt pattern output flanges.
FinalDrive
07-13-2009, 03:29 PM
did either of those Q45s use R200v? i have 5 and 6 bolt flange axles so either would work for me if that's the case.
UNISA JECS
07-13-2009, 04:22 PM
did either of those Q45s use R200v? i have 5 and 6 bolt flange axles so either would work for me if that's the case.

They both use R200V and I have used both of those VLSD's on my own S13 coupe.

I have some 6 bolt 30 spline outputs shafts for sale also.
FinalDrive
07-13-2009, 06:35 PM
sent you a PM