racepar1
07-11-2009, 01:35 PM
I'm sick of having all this stuff lying around so it's time to blow it out. Everything in this thread is in good working condition and is definitely OBO. Shipping will be extra unless otherwise noted.
Plug and play complete wiring for s-13 silvia front foglights
I have a complete wiring set for the s-13 silvia foglights using the factory foglight wiring. This will be plug and play on any chuki 240sx. The zenki s-13's have a different connector for the foglight wiring by the battery and I can include a chuki connector for you to splice into your zenki wiring. I made the subharness myself. It uses the OE connectors for the lights and the OE connector for the subharness to the main harness. All connections are soldered and shrink wrapped and the harness is sheathed. This includes my subharness, the fuse, the relay and the switch. The switch is VERY rare and is currently backordered through nissan. I bought the switch brand new about 6 months ago. The switch goes on the cluster bezel under the pop-up light switch. This wiring set-up looks very clean and can be used on any foglights, not just the OE silvia ones. You would just have to change the connector at the lights.
SOLD!
KA alternator
The top one is gone, the bottom one is still left. It came out of a running car and worked perfectly when removed. It has not been sitting for more then a year and has been sitting inside for the whole time.
$20
http://i275.photobucket.com/albums/jj283/racepar1/blowout040.jpg
Ka24e distributor, p/s pump, aac valve, and iacv valve
All items were in good working condition when removed and were stored inside. Aac and iacv valves were cleaned with throttlebody cleaner. The powersteering pump does not leak and worked perfectly, no noise.
$5 each item
P/S pump SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/blowout062.jpg
chuki bumper vent grilles
Since I made my "version 2" brake ducts I no longer need these. They are in pretty good shape, but have a couple of knicks on them.
$15 OBO
http://i275.photobucket.com/albums/jj283/racepar1/blowout058.jpg
s-13 non-abs master cylinder (7/8")
The master worked perfectly, no problems EVER. It comes with the resovoir and cap. This is MY brake master off MY car so you know it is good.
$15
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout015.jpg
s-13 m/t crossmembers
One is perfect and the other has one dent in it. The dented one is still perfectly functional.
$20 for the clean one
$15 for the dented one
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2006.jpg
s-13 5-speed lower harness
This is a complete harness, no cut wiring. It came off a federal emissions SOHC ka (no wiring for sohc egr temp sensor). It will work directly with any kade as their egr temp wiring is in the engine harness.
$30
http://i275.photobucket.com/albums/jj283/racepar1/blowout031.jpg
S-13 radio brackets w/din pocket
Just as the picture shows, complete assembly. Unfortuanetly I do not have the little screws to attach the radio.
SOLD!
Passenger's side OE chuki bumper light
This is a used, OE nissan, passenger's side, bumper light for the chuki front end. The lens is a little sandblasted, but has no chips, cracks, scratches, or fading.
$5
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout018.jpg
Ka24e (singlecam) MAFS x2
Both came out of running cars and both have been cleaned with MAFS cleaner. One uses a 3 pin connector, one uses a 4 pin connector (only 3 used). If you look closely in the pic you can read the part numbers.
$15 each
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout017.jpg
Twist lock clips for s-13 silvia headlights
These are the OE twist-lock clips that hold the boots onto the back of the s-13 silvia headlights. I have 6 of these from a set of headlights that I cannabilized.
$5 each shipped
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout016.jpg
KA24e (singlecam) ignition coil assembly
Came out of a running car, no problems.
$10 OBO
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout014.jpg
Findanza short shifter
The bushing for the tip is missing, other then that it's complete. I used it for a while, felt pretty good.
SOLD!
NEW energy suspension urethane 3-piece s-13 tension rod bushings
These are brand new, never used. This is the new 3-piece design. The old, solid design was notorious for cracking control arms. These do not have that issue.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout010.jpg
Used non-abs s-13 front rotors
These are aftermarket used rotors for s-13 front w/o abs. I just machined them so they are ready to go on the car. Plenty of life left on the rotors, they are well above minimum spec.
SOLD!
Used s-13 non abs front calipers
No leaks, both worked perfectly on the car.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2012.jpg
Used stock ka radiator w/fan shroud
The radiator does not leak, it came off a running car. It could use a wash though. One tab on the fan shroud is broken, but it's nothing a big washer couldn't fix.
$25
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2011.jpg
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2010.jpg
Stock s-13 axles
These are in perfect working shape, came off my car. One of the inner boots has a small patch which has held for over a year.
$30
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2009.jpg
Z-32 rear tokico blues
In perfect shape, no leaks. All the OE and aftermarket s-13 rear springs and mounts bolt right onto these and they are the correct length. This is a cheap and easy way for anyone to do the 300zx aluminum upright upgrade. Total cost would be under $100 for the shocks and the uprights, which I do not have unfortuanetly.
$35
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2008.jpg
S-13 silvia front bumper brackets & foam and 240sx bumper to fender brackets
These are for the JDM s-13 silvia fromt bumper. I also have one set of USDM 240sx bumper to fender brackets.
$5 each piece
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2007.jpg
Dualcam compressor bracket w/good tensioner
The bolts that hold it to the block are included and the bearing on the tensioner pulley is still in good shape.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2005.jpg
S-13 front endlinks
I have 3 of them available, all are in good working order.
Only one endlink still available!
$5 each
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2004.jpg
Used s-13 urethane endlink bushings
I have 2 sets of fronts (red) and one set of rears (black). They are all in very good shape, I didn't have any of them on the car for too long. Made by energy suspension.
$5 shipped for each front set
$10 shipped for the rear set
one front set SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2003.jpg
Pop-up china h-4 conversion headlight housings w/bulbs
These are NOT the fake ass projectors, just regular, china, h-4 conversion headlight housings w/2 h-4 bulbs. Everything you need to convert your car to h4 bulbs.
$40 OBO
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3007.jpg
2x used kioto h3c bulbs for silvia front
Used kioto bulbs, still work fine.
$5 shipped each
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3003.jpg
2x h3 bulbs for silvia front
One is a phillips bulb and the other bulb is german made, but I do not know the brand. Both bulbs are pretty much brand new, maybe used for a week.
$10 shipped each
phillips:
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3004.jpg
unknown german bulb:
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3006.jpg
2x no-name brand h-4 bulbs
Unknown brand used h-4 bulbs, the same ones that come in the cheapie conversion housings above. Both work.
$5 shipped each
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3002.jpg
2 pairs (4 bulbs total) of no-name LED 194 replacement bulbs
These are designed to directly replace the 194 running light bulbs. All work, brighter then stock.
$5 shipped per pair
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3005.jpg
OE headlight shrouds for pop-up front
These are the OE plastic shrouds that go around the sides of the stock pop-up headlights. They are in good shape, no cracks, overspray, etc... but do have a few scratches here and there. There is very little fading of the plastic. Pics will be up tomorrow.
$20 OBO
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3001.jpg
Plug and play complete wiring for s-13 silvia front foglights
I have a complete wiring set for the s-13 silvia foglights using the factory foglight wiring. This will be plug and play on any chuki 240sx. The zenki s-13's have a different connector for the foglight wiring by the battery and I can include a chuki connector for you to splice into your zenki wiring. I made the subharness myself. It uses the OE connectors for the lights and the OE connector for the subharness to the main harness. All connections are soldered and shrink wrapped and the harness is sheathed. This includes my subharness, the fuse, the relay and the switch. The switch is VERY rare and is currently backordered through nissan. I bought the switch brand new about 6 months ago. The switch goes on the cluster bezel under the pop-up light switch. This wiring set-up looks very clean and can be used on any foglights, not just the OE silvia ones. You would just have to change the connector at the lights.
SOLD!
KA alternator
The top one is gone, the bottom one is still left. It came out of a running car and worked perfectly when removed. It has not been sitting for more then a year and has been sitting inside for the whole time.
$20
http://i275.photobucket.com/albums/jj283/racepar1/blowout040.jpg
Ka24e distributor, p/s pump, aac valve, and iacv valve
All items were in good working condition when removed and were stored inside. Aac and iacv valves were cleaned with throttlebody cleaner. The powersteering pump does not leak and worked perfectly, no noise.
$5 each item
P/S pump SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/blowout062.jpg
chuki bumper vent grilles
Since I made my "version 2" brake ducts I no longer need these. They are in pretty good shape, but have a couple of knicks on them.
$15 OBO
http://i275.photobucket.com/albums/jj283/racepar1/blowout058.jpg
s-13 non-abs master cylinder (7/8")
The master worked perfectly, no problems EVER. It comes with the resovoir and cap. This is MY brake master off MY car so you know it is good.
$15
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout015.jpg
s-13 m/t crossmembers
One is perfect and the other has one dent in it. The dented one is still perfectly functional.
$20 for the clean one
$15 for the dented one
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2006.jpg
s-13 5-speed lower harness
This is a complete harness, no cut wiring. It came off a federal emissions SOHC ka (no wiring for sohc egr temp sensor). It will work directly with any kade as their egr temp wiring is in the engine harness.
$30
http://i275.photobucket.com/albums/jj283/racepar1/blowout031.jpg
S-13 radio brackets w/din pocket
Just as the picture shows, complete assembly. Unfortuanetly I do not have the little screws to attach the radio.
SOLD!
Passenger's side OE chuki bumper light
This is a used, OE nissan, passenger's side, bumper light for the chuki front end. The lens is a little sandblasted, but has no chips, cracks, scratches, or fading.
$5
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout018.jpg
Ka24e (singlecam) MAFS x2
Both came out of running cars and both have been cleaned with MAFS cleaner. One uses a 3 pin connector, one uses a 4 pin connector (only 3 used). If you look closely in the pic you can read the part numbers.
$15 each
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout017.jpg
Twist lock clips for s-13 silvia headlights
These are the OE twist-lock clips that hold the boots onto the back of the s-13 silvia headlights. I have 6 of these from a set of headlights that I cannabilized.
$5 each shipped
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout016.jpg
KA24e (singlecam) ignition coil assembly
Came out of a running car, no problems.
$10 OBO
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout014.jpg
Findanza short shifter
The bushing for the tip is missing, other then that it's complete. I used it for a while, felt pretty good.
SOLD!
NEW energy suspension urethane 3-piece s-13 tension rod bushings
These are brand new, never used. This is the new 3-piece design. The old, solid design was notorious for cracking control arms. These do not have that issue.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout010.jpg
Used non-abs s-13 front rotors
These are aftermarket used rotors for s-13 front w/o abs. I just machined them so they are ready to go on the car. Plenty of life left on the rotors, they are well above minimum spec.
SOLD!
Used s-13 non abs front calipers
No leaks, both worked perfectly on the car.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2012.jpg
Used stock ka radiator w/fan shroud
The radiator does not leak, it came off a running car. It could use a wash though. One tab on the fan shroud is broken, but it's nothing a big washer couldn't fix.
$25
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2011.jpg
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2010.jpg
Stock s-13 axles
These are in perfect working shape, came off my car. One of the inner boots has a small patch which has held for over a year.
$30
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2009.jpg
Z-32 rear tokico blues
In perfect shape, no leaks. All the OE and aftermarket s-13 rear springs and mounts bolt right onto these and they are the correct length. This is a cheap and easy way for anyone to do the 300zx aluminum upright upgrade. Total cost would be under $100 for the shocks and the uprights, which I do not have unfortuanetly.
$35
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2008.jpg
S-13 silvia front bumper brackets & foam and 240sx bumper to fender brackets
These are for the JDM s-13 silvia fromt bumper. I also have one set of USDM 240sx bumper to fender brackets.
$5 each piece
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2007.jpg
Dualcam compressor bracket w/good tensioner
The bolts that hold it to the block are included and the bearing on the tensioner pulley is still in good shape.
$20
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2005.jpg
S-13 front endlinks
I have 3 of them available, all are in good working order.
Only one endlink still available!
$5 each
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2004.jpg
Used s-13 urethane endlink bushings
I have 2 sets of fronts (red) and one set of rears (black). They are all in very good shape, I didn't have any of them on the car for too long. Made by energy suspension.
$5 shipped for each front set
$10 shipped for the rear set
one front set SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout2003.jpg
Pop-up china h-4 conversion headlight housings w/bulbs
These are NOT the fake ass projectors, just regular, china, h-4 conversion headlight housings w/2 h-4 bulbs. Everything you need to convert your car to h4 bulbs.
$40 OBO
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3007.jpg
2x used kioto h3c bulbs for silvia front
Used kioto bulbs, still work fine.
$5 shipped each
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3003.jpg
2x h3 bulbs for silvia front
One is a phillips bulb and the other bulb is german made, but I do not know the brand. Both bulbs are pretty much brand new, maybe used for a week.
$10 shipped each
phillips:
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3004.jpg
unknown german bulb:
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3006.jpg
2x no-name brand h-4 bulbs
Unknown brand used h-4 bulbs, the same ones that come in the cheapie conversion housings above. Both work.
$5 shipped each
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3002.jpg
2 pairs (4 bulbs total) of no-name LED 194 replacement bulbs
These are designed to directly replace the 194 running light bulbs. All work, brighter then stock.
$5 shipped per pair
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3005.jpg
OE headlight shrouds for pop-up front
These are the OE plastic shrouds that go around the sides of the stock pop-up headlights. They are in good shape, no cracks, overspray, etc... but do have a few scratches here and there. There is very little fading of the plastic. Pics will be up tomorrow.
$20 OBO
http://i275.photobucket.com/albums/jj283/racepar1/finalblowout3001.jpg