R34 Skyline Brake Package

[deltrr]

This is the ultimate brake upgrade package! The front calipers are from an R34 Skyline and the rears are from a Z32 300zx. All the rotors are made by Stillen, crossdrilled and vented. The front rotors are 32mm thick and 13inches wide! This kit also comes with a full set of stainless brakelines. All the items are shown below.

http://james.exiva.net/skylinebrakes.jpg (http://james.exiva.net/skylinebrakesbig.jpg)

Don't be deturred by the rust on the rear rotors, rust is very common because the rotors cannot be made out of stainless steel and also cannot have any protective coating on the brake surface. Therefore, rust forms when the rotors are not used.
I'm looking to get $800 for this whole set. e-mail [email protected] if you have any questions or would like to purchase. I'm in the NOVA area and this item will be for pickup only unless the buyer wants to pay for the shipping charges.

Thanks! :D

[enyaw_13]

Is it easy to bolt on the R34 brakes to an S13 non ABS?

[andrave]

need to have them drilled for 4 lug or do a 5 lug hub swap. rears might be a problem cause they don't use the same parking brake setup as the s13. they use a little drum in the hat or something. do a search, its been covered.

[deltrr]

This is true, everything bolts right up to the spindles, though.

[DriftChicken]

R34 brakes would make me cool...

[enyaw_13]

I was actually looking for a brake upgrade... but if get these skyline brakes, the stock 15" alum. rims will not clean right?
So what offset would I need to get?

[deltrr]

You'll need 17's to clear them and an offset of more than 16