'92 super hicas PS question! HELPPP.

[S14Cuhh]

BACKROUND; so i have a 1992 super hicas model. i changed out the subframe to a NON hicas and blocked off the PS lines to the rear.

PROBLEM; i want to change my PS pump..but im not sure if a normal KADE ps pump will be okay.

other option; rebuild my existing PS pump.

PICS SOON TO COME OF THE COMPARISONS

this is normal KADE ps pump
http://nissaninfiniticlub.net/photopost/data/500/2338dscn00225.jpg

ajsfhf i need to take a pic of the hicas

[ManoNegra]

find one (friend, junkyard) and try it out
shouldn't be too hard

[S14Cuhh]

i would do that..but i need things to go smoothly. this is my only car.

naamean?

[MelloS13]

i did this swap a month ago on my car, but i removed all the HICAS lines and converted it to 2wheel. If you already blocked off the line to the rear then i believe you can put a 2wheel pump in its place. you cannot use the HICAS bracket it wont work on a 2wheel pump. so make sure you pick up both from the junkyard.

[S14Cuhh]

i did this swap a month ago on my car, but i removed all the HICAS lines and converted it to 2wheel. If you already blocked off the line to the rear then i believe you can put a 2wheel pump in its place. you cannot use the HICAS bracket it wont work on a 2wheel pump. so make sure you pick up both from the junkyard.
sweet. i got a dohc pump. a smaller ps reservoir . and a high pressure line. now i need the bracket.

you my friend are a good zilvian:kiss:

[MelloS13]

i cant recall if the smaller PS reservoir will work. Because the HICAS reservoir is longer in length the return line might be to short, unless you relocate it lower but i could be wrong. I suggest you convert all the lines to a 2wheel steering. HICAS is just to complicated and takes up to much room extra hard/soft lines, HICAS solenoid valve, and a safety valve just get rid of it all.

[S14Cuhh]

i cant recall if the smaller PS reservoir will work. Because the HICAS reservoir is longer in length the return line might be to short, unless you relocate it lower but i could be wrong. I suggest you convert all the lines to a 2wheel steering. HICAS is just to complicated and takes up to much room extra hard/soft lines, HICAS solenoid valve, and a safety valve just get rid of it all.
yah . i had my car on the lift next to my buddys and i saw so many unecessary lines. do yooh have any pics of the soleniod and safety valve so i know what to remove?

[MelloS13]

http://i386.photobucket.com/albums/oo302/mellos13/Untitled.jpg

[S14Cuhh]

asjhfjhsa;djg thats PERFECT thanks a grip

[S14Cuhh]

http://i386.photobucket.com/albums/oo302/mellos13/Untitled.jpg
yooh bought the subframe off my friend mario for the swap huh?