PDA

View Full Version : Kics 25+15mm bolt on spacers - OEM studs?


boozy
07-01-2009, 11:47 AM
Hey there, i wanna go deep dish and i wanna have som extended wheels studs, but i have a question first...

i have kics 25 mm bolt on in the rear and some others 15mm in the front, is it right that the bolts that the spacers is boltet on with is the OEM bolts ( that the spacers not comes with mounting bolts)

so in theory i could take the spacers of and it schould be good??

the OEM bolts is sitting in the recess of the wheels right..

http://i13.photobucket.com/albums/a270/dkboozy/PC140790.jpg

http://i13.photobucket.com/albums/a270/dkboozy/PC140796.jpg

http://i13.photobucket.com/albums/a270/dkboozy/Nissan%20silvia/Billede090.jpg

and btw whats the best extended wheels studs:

ARP

PEAK PERFORMANCE

NISMO

and is it okay to buy lug nuts with a hole thrue it and just let the stds go in there, or schould i make the wheels fit and after that cut the studs?

and last question, what the size of the OEM studs, the nismo 60mm is that the hole stud or where the wheel is beeing attached



Need some deep dish wheels and overfenders:

YouTube - S14 silvia with rolled guards (http://www.youtube.com/watch?v=jtnpGSiR98E&eurl=http%3A%2F%2Fwww%2Eyoutube%2Ecom%2Fuser%2Fdkb oozy&feature=player_profilepage)

ILoveJDM
07-01-2009, 11:51 AM
Hey there, i wanna go deep dish and i wanna have som extended wheels studs, but i have a question first...


stop right there. the deepest dish is achieved without spacers.

arp/peakperformance/nismo are all good studs, stay away from h&r

and as long as the oem nuts are seated properly inside the spacer, they should be fine

Nezahualcoyotl
07-01-2009, 12:13 PM
Deep dish=low offset
Deep dish+spacers= wider fenders

boozy
07-01-2009, 02:33 PM
Yeah i know how deep dish works... wanna have just ca 5mm space to play with ( to make the wheels get a Hellaflush look, just that why i wanna have som extended hub studs, but i have readed that nismo is same quality then EOM just longere, and when i take som small spacers on theese, that will set the studs under stress...

but may go for some peak performance or ARP, and make a spot weld the make the studs sit there and not get loose, but what ARP is ready to fit in the front and rear of an nissna silvia SR20DET 96èr......

urmyhero4now
07-01-2009, 03:14 PM
Yeah i know how deep dish works... wanna have just ca 5mm space to play with ( to make the wheels get a Hellaflush look, just that why i wanna have som extended hub studs, but i have readed that nismo is same quality then EOM just longere, and when i take som small spacers on theese, that will set the studs under stress...

but may go for some peak performance or ARP, and make a spot weld the make the studs sit there and not get loose, but what ARP is ready to fit in the front and rear of an nissna silvia SR20DET 96èr......

damn dude you dont know how deep dish works lol. You need to search on this forum more before postin up questions like this. You dont need extended studs. If you "need" spacers just use adapter style. But if you get low enough offset wheels you wont need spacers. most stock studs can handle up to a 5mm stack style spacer with no issues.

boozy
07-01-2009, 10:18 PM
its because that i dont know how good or if they are OEM i have, so just wanna get some fresh ones, what will the size be iff i wanna have some studs that can take up to 10mm... whats the original size?