BOV, WG, etc, and Vaccum lines

[s13silady]

i have a couple questions about the vaccum lines that connect to the BOV and wastegate and RRFPR...

how many T's will i need and will it matter which vaccum lines i use?

if anyone can tell me which lines i could hook up and what would i need to hook them up... and if anyone could take pics for me that would be the best. thanks again..
*ryan

[Foxcolt]

Search Fresh alloy/zilvia...I did a write up on the exact thing your asking a long time ago..I'd do it again but I forgot:eek:

[boosteds14]

i would get one 5-way

one that looks like this

ll ll ll
=============

this way here you got three ports, one for WG, BOV, and regulator

[Cadence]

Well lets see.. You need a line running to the Wastegate, the BOV and the FPR as you stated... SO it looks like you need a tee that has three runs on it.. like the above person stated. It really would be best to take the boost signal from as close to the turbo as possible to avoid any spiking issues. And I would really like to see the line for the FPR as on its own source. So you can run the BOV off the tee on the Right and the FRP off the left one.. and there should be a bung of some sort on your IC piping that would be better for the Wastegate.. if not.. just tee off the BOV line. Another good idea is to use that strong silicone line as well instead of regular vac line.. Vac line will work but for higher boost apps you may experiance some creep/spiking with the expansion of the line.

Hope this helps.

Matt