drftmark
06-25-2009, 12:16 AM
Vin:
Jn1as44d9tw055473
FS is my 96 S14.
I am selling because I want something new with A/C, and I have already pretty much finished this car and made it perfect. This is a stealllll, I just need a new project. It ran in Texas A&M autocross 5-6 times and did very well. car has 96xxx miles, and engine was rebuilt less than 3000 miles ago with fresh bearings, gaskets etc...
The car was tuned by Brad at Engine Logics. Save yourself some money and buy my car instead of doing it to yours.
12K obo.
TRADES WILL BE CONSIDERED. but needs to be another sports car, I already have a Camry.
I have all the receipts etc in a folder and some other little extra things.
The car handles AWESOME.
Also the picture of the interior is not correct, the door panels are currently on and some other misc interior pieces are on.
Engine:
LS1 coilpacks
10mm sparkplug wires
s15 sr
s15 6 speed transmission
s15 helical diff(the best for roadracing)
JE forged pistons
Cometic headgasket
HKS step 1's 256/256
JWT cam gears
Apexi front mount intercooler
B&M oil cooler with AN fittings
Greddy oil filter relocation
gt2871r .86
koyo radiator
blue reinforced silicon hose
circuit sports water and oil lines
Divided Turbo elbow
RS*R downpipe
greddy evo 2 exhaust
manual boost controller
K&N airfilter
Blitz BOV
Nismo exhaust hangers
redline MT-90 transmission fluid
Torco diff fluid
Exedy clutch
lightweight chromoly flywheel
Suspension:
Zeal coilovers (forgot model, but badass)
SPL tension rods
Bings (look them up if your not familiar, they are the canadian equivalent of SPL parts, they use the same rod ends etc.)
^
Bing's toe arm
Bing's traction arm
Energy suspension poly bushings on front sway bar and mounts
Kazama subframe slip inserts
Nismo Power brace
just got an alignment last week:
-2.6 camber in front
-1.6 camber in rear
stock spec toe and caster
wheels\Brakes:
meyle rotors
hawk HP+ pads
gorrilla lugnuts
MB weapons 17x9 +27
Advan ao32-r tires (extremely gripppppy)
electrical/chassis:
miata battery
Haltech E8 Standalone computer
Haltech trim dial
3 bar map sensor
haltech wideband
hks boost gauge
pro sport water temp gauge
pro sport oil pressure gauge
pro sport oil temp gauge (not hooked up, need sensor)
nismo shift knob
MazWorx weld in 6 point cage(door bars are not welded in, but will be included, so techinally its a 4 point right now)
black flocked dash
ebay ganador mirrors
momo steering wheel
weight reduction done, but I put the rear bumper support back on, can take off if you want.
sound deadening removed
Final Konnexion clear s14 zenki headlights
Dmax clear corners
and I probably forgot somethings
If I remember something else I will add it.
The bad:
The paint needs to be wetsanded/buffed. Paint is not perfect. Hood has a lot of little dings that you really can't see in picture, but not that big of a deal.
no a/c, but I have the condensor and bracket for an s15 sr.
Front bumper is cracked a little, just needs to be fiberglassed, I have a little bit of extra paint that will be included.
not necessarily a bad thing, but the sunroof was removed and I made a Plexiglas plug to cover the hole. It is secured with 3M doublesided tape and silicone. It does NOT leak. Doesn't effect rigidity because of cage.
If you have any questions just PM me or email me at [email protected]
http://i12.photobucket.com/albums/a221/markfluko/DSC00150.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00140.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00141.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00135.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00134-1.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00133.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00142.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00144.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00131.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00147.jpg
Jn1as44d9tw055473
FS is my 96 S14.
I am selling because I want something new with A/C, and I have already pretty much finished this car and made it perfect. This is a stealllll, I just need a new project. It ran in Texas A&M autocross 5-6 times and did very well. car has 96xxx miles, and engine was rebuilt less than 3000 miles ago with fresh bearings, gaskets etc...
The car was tuned by Brad at Engine Logics. Save yourself some money and buy my car instead of doing it to yours.
12K obo.
TRADES WILL BE CONSIDERED. but needs to be another sports car, I already have a Camry.
I have all the receipts etc in a folder and some other little extra things.
The car handles AWESOME.
Also the picture of the interior is not correct, the door panels are currently on and some other misc interior pieces are on.
Engine:
LS1 coilpacks
10mm sparkplug wires
s15 sr
s15 6 speed transmission
s15 helical diff(the best for roadracing)
JE forged pistons
Cometic headgasket
HKS step 1's 256/256
JWT cam gears
Apexi front mount intercooler
B&M oil cooler with AN fittings
Greddy oil filter relocation
gt2871r .86
koyo radiator
blue reinforced silicon hose
circuit sports water and oil lines
Divided Turbo elbow
RS*R downpipe
greddy evo 2 exhaust
manual boost controller
K&N airfilter
Blitz BOV
Nismo exhaust hangers
redline MT-90 transmission fluid
Torco diff fluid
Exedy clutch
lightweight chromoly flywheel
Suspension:
Zeal coilovers (forgot model, but badass)
SPL tension rods
Bings (look them up if your not familiar, they are the canadian equivalent of SPL parts, they use the same rod ends etc.)
^
Bing's toe arm
Bing's traction arm
Energy suspension poly bushings on front sway bar and mounts
Kazama subframe slip inserts
Nismo Power brace
just got an alignment last week:
-2.6 camber in front
-1.6 camber in rear
stock spec toe and caster
wheels\Brakes:
meyle rotors
hawk HP+ pads
gorrilla lugnuts
MB weapons 17x9 +27
Advan ao32-r tires (extremely gripppppy)
electrical/chassis:
miata battery
Haltech E8 Standalone computer
Haltech trim dial
3 bar map sensor
haltech wideband
hks boost gauge
pro sport water temp gauge
pro sport oil pressure gauge
pro sport oil temp gauge (not hooked up, need sensor)
nismo shift knob
MazWorx weld in 6 point cage(door bars are not welded in, but will be included, so techinally its a 4 point right now)
black flocked dash
ebay ganador mirrors
momo steering wheel
weight reduction done, but I put the rear bumper support back on, can take off if you want.
sound deadening removed
Final Konnexion clear s14 zenki headlights
Dmax clear corners
and I probably forgot somethings
If I remember something else I will add it.
The bad:
The paint needs to be wetsanded/buffed. Paint is not perfect. Hood has a lot of little dings that you really can't see in picture, but not that big of a deal.
no a/c, but I have the condensor and bracket for an s15 sr.
Front bumper is cracked a little, just needs to be fiberglassed, I have a little bit of extra paint that will be included.
not necessarily a bad thing, but the sunroof was removed and I made a Plexiglas plug to cover the hole. It is secured with 3M doublesided tape and silicone. It does NOT leak. Doesn't effect rigidity because of cage.
If you have any questions just PM me or email me at [email protected]
http://i12.photobucket.com/albums/a221/markfluko/DSC00150.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00140.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00141.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00135.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00134-1.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00133.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00142.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00144.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00131.jpg
http://i12.photobucket.com/albums/a221/markfluko/DSC00147.jpg