ka24de problems starting "help"

[biggbadd240sx]

hey my names josh and was wanting to know something about my car (http://zilvia.net/f/)?? my car (http://zilvia.net/f/#) turns over and starts, but when it starts it first idles at like 1000 rpms but after about 1 second it goes all the way down like its going to die, afterit goes back up slowly to 1000 rpms, sometimes when i start it, it starts but then it dies, then it will start back up, and sometimes it wont start back up until like 5 minutes. i just did a auto to manual convesion and even before when i had the auto it still did it. but the car only does it when its cold, after i first drive it that day it will be fine and start normal. so basically its having cold start problems, so if anybody can help me out ill appreiciate it thanks

[codunc]

i think i've seen this thread before.. something like 6 times?
have you pulled codes from the ecu?

[David B S12]

take a video of it idling, then put throttle on it and hold at 2,000 rpms and post it

[biggbadd240sx]

i think i've seen this thread before.. something like 6 times?
have you pulled codes from the ecu?

well before when i had the automatic, it didnt have any codes, now after the manual sway it thows 7 codes but because of the auto ecu... so i dont know what it could be

[biggbadd240sx]

take a video of it idling, then put throttle on it and hold at 2,000 rpms and post it

yea i would but dont have my camera recorder, so what do you think it is, of what i wrote on top

[codunc]

well before when i had the automatic, it didnt have any codes, now after the manual sway it thows 7 codes but because of the auto ecu... so i dont know what it could be
rather than say, "it throws 7 codes", why not just mention what the codes are.. then maybe someone can help you.
and stop reposting this!

[biggbadd240sx]

the codes are 1445 change in timing curve , 0705 prndl input,0740 torque converter, 0745 pressure control solenoid,0750 shift solenoid a, 0755 b, 0760 and c