DOHCsky
06-22-2009, 01:35 AM
Let me try to be honest.
This motors been beat on.
there.
The motor has poor compression at the moment, but I will include a brand new apexi headgasket and if you want, I will also buy you brand new ARP headstuds. The car still runs and drives just fine, it just isnt fast, and takes FOREVER to get into boost.
so, heres some neat stuff.
THIS COMES WITH EVERYYYY THING YOU COULD EVER POSSIBLY NEEEEEDDDDD!!!!
Motor, tranny, tuned ECU, wiring harness, radiator, hoses, mid mount intercooler set-up, turbo, o2 housing, downpipe, maybe full exhaust. EVERYTHING!
---96 sr20det 180sx blacktop
-gnarly ported and polished head
BC 264 cams
BC ti springs and retainers
Apexi Headgasket
ARP headstuds
awesometownville valve cover.
-Bottom end
Rebuilt about 25,000 miles ago
fully balanced bottom end
New OEM bearings
OEM rods
Swaine Tech coated OEM pistons
block cleaned and honed.
-Turbo stuff
ISIS exhaust manifold
t28(old sponsor rebuilt it, and said they made 300whp on an SR with an axact same turbo)
Shimmed wastegate to make 16 psi(it doesnt hold 16. Its either the motor, or the actuator. Id put a stock one on and run a boost controller)
Megan racing o2 housing
ISIS downpipe
-Knock off greddy intake manifold (port matched to the head)
-Ebay intercooler with midmount piping
-z32 MAF
-D-werks 740 injectors
-Enthalpy tuned ECU
-Koyo Radiator
-sr20 tranny, makes a lil noise but shifts fine with no grinds
-Spec Stage 3 clutch
-Ebay Light weight flywheel
-Knock off greddy oil pan
I REALLY DONT WANNA PART OUT.
Idk cool stuff and its everything you could ever possibly need.
If you want a 300whp SR, you could buy this and be good to go.
$2,000
I WILL NOT SHIP!
http://img.photobucket.com/albums/v330/Fitkid04/l_3db327c93de707355a06d09aaf68ee28.jpg
A picture to hold you over. Old turbo set-up, pre mid mount. But seriously, you seen one SR, you seen em all. I will take pictures when I get up today.
PLEASE JUST E-MAIL ME IF YOU'RE INTERESTED!!!!
[email protected]
This motors been beat on.
there.
The motor has poor compression at the moment, but I will include a brand new apexi headgasket and if you want, I will also buy you brand new ARP headstuds. The car still runs and drives just fine, it just isnt fast, and takes FOREVER to get into boost.
so, heres some neat stuff.
THIS COMES WITH EVERYYYY THING YOU COULD EVER POSSIBLY NEEEEEDDDDD!!!!
Motor, tranny, tuned ECU, wiring harness, radiator, hoses, mid mount intercooler set-up, turbo, o2 housing, downpipe, maybe full exhaust. EVERYTHING!
---96 sr20det 180sx blacktop
-gnarly ported and polished head
BC 264 cams
BC ti springs and retainers
Apexi Headgasket
ARP headstuds
awesometownville valve cover.
-Bottom end
Rebuilt about 25,000 miles ago
fully balanced bottom end
New OEM bearings
OEM rods
Swaine Tech coated OEM pistons
block cleaned and honed.
-Turbo stuff
ISIS exhaust manifold
t28(old sponsor rebuilt it, and said they made 300whp on an SR with an axact same turbo)
Shimmed wastegate to make 16 psi(it doesnt hold 16. Its either the motor, or the actuator. Id put a stock one on and run a boost controller)
Megan racing o2 housing
ISIS downpipe
-Knock off greddy intake manifold (port matched to the head)
-Ebay intercooler with midmount piping
-z32 MAF
-D-werks 740 injectors
-Enthalpy tuned ECU
-Koyo Radiator
-sr20 tranny, makes a lil noise but shifts fine with no grinds
-Spec Stage 3 clutch
-Ebay Light weight flywheel
-Knock off greddy oil pan
I REALLY DONT WANNA PART OUT.
Idk cool stuff and its everything you could ever possibly need.
If you want a 300whp SR, you could buy this and be good to go.
$2,000
I WILL NOT SHIP!
http://img.photobucket.com/albums/v330/Fitkid04/l_3db327c93de707355a06d09aaf68ee28.jpg
A picture to hold you over. Old turbo set-up, pre mid mount. But seriously, you seen one SR, you seen em all. I will take pictures when I get up today.
PLEASE JUST E-MAIL ME IF YOU'RE INTERESTED!!!!
[email protected]