PDA

View Full Version : WA FS: RB parts


ildraconisli
06-20-2009, 11:20 AM
I have some misc parts from Skyline motorsets:

RB26DETT Mafs. The motor is twin turbo so what you get are two mafs. Looking for $200 for the pair.

RB20/25/26 DET/DETT coilpacks. These are genuine Nissan coilpacks from the motorset. They work fine and such. Have 2 sets if needed. Looking for $200 for a set of 6. That is cheaper than what I've seen on ebay.

RB20DET cam angle sensor. This is the one that you can rebuild. You just take it a part like a clam shell and replace the electronic board inside if you need in the future. These are harder to find since not all of the CAS were of this nature. Looking for $150 for this.

S15 black top SR20DET/RB25DET injectors. I have a set of 6 of these. They are stock from a black top S15 SR engine so are fairly large and a bolt on upgrade for the RB25 seeing that it's side feed compared to the RB20/26, which are top feed. Looking for $300 for the set.

Rb26dett power steering pumps. Both are from hicas systems. One pump iss modified for rwd and the other still has the 4 wheel setup, unmolested. PrIces are obo bbut thinking $100 for modded one and $75 for the untouched one.

All items are obo so feel free to pm me.

http://img.photobucket.com/albums/v690/Draconis9/For%20sale/sale005.jpg
http://img.photobucket.com/albums/v690/Draconis9/For%20sale/sale004.jpg
http://img.photobucket.com/albums/v690/Draconis9/For%20sale/sale006-1.jpg

Popscribble
06-21-2009, 12:04 AM
you say those s15 injectors fit right in the rb25 mani? hmmm

Popscribble
06-21-2009, 12:06 AM
So the s15 injectors bolt into the rb fuel rail? hmmmmmmmmm

ildraconisli
06-21-2009, 01:52 AM
yes they are direct plug and play.

ildraconisli
06-21-2009, 04:13 PM
http://img.photobucket.com/albums/v690/Draconis9/injectors.jpg

ildraconisli
06-21-2009, 04:30 PM
I was asked to put up some numbers that are on the injectors. I took one out and here is what I found. I cannot get a pic to that level without it being blurry. I need a better digi cam. Sorry.

Side where the black plastic bit is: Made In Japan A5

On the top rectangular bit that feeds into the fuel rail:
CC00124 one one side and A46-F52

Hope that makes sense to someone. These came from Australia and I know the bloke I got them from.

DJJIGGYPUFF
07-02-2009, 06:58 PM
Got my CAS today. Thanks

Popscribble
07-28-2009, 04:38 PM
you have a pm

ruleofthez
07-30-2009, 02:54 PM
What years are the coil packs for? Series I or II?

Nismo240z
09-10-2009, 04:06 PM
do you still have the 6 injectors?? they are the spec R s15 sr right?? 440cc??