ka24de knock sensor install

[fastandlow]

I know what it does and how to install do i need to scrape (sand) to bare metal the block were the sensor connects, like a ground.:rant2:

[gijoe69]

no just use a towel to clean up dirt

[Kaifd3s]

Have fun. That install is BITCH!

[adoboboy]

haha took me 3 hours to in stall that beetch. 3 hours for really just 1 damn screw.

[SilviaSR20DET]

do you guys have to remove the manifold to get to the sensor or magically slip a tool through the manifold area and loosen it that way?

[Tearlessj]

It took me 5 seconds.






but the motor was on a stand with the intake manifold off. lol

[S14Driftr91]

just did mine the other day. took about an hour. take a long ass extension with a wobble socket to get it out. i also pushed my fuel lines over a little too. getting the sensor out is somewhat easy just lining up the bolt to install it is a pain in the ass. just have some patience and a metal coat hanger may also come in handy.

have anymore questions feel free to ask :bigok:

[fastandlow]

took me 20min engine is out but had the manifiold on